Browse > Article
http://dx.doi.org/10.5573/JSTS.2010.10.3.213

Optically Controlled Silicon MESFET Fabrication and Characterizations for Optical Modulator/Demodulator  

Chattopadhyay, S.N. (Department of Electrical and Computer Engineering California State University)
Overton, C.B. (Department of Electrical and Computer Engineering California State University)
Vetter, S. (Department of Electrical and Computer Engineering California State University)
Azadeh, M. (Department of Electrical and Computer Engineering California State University)
Olson, B.H. (Department of Electrical and Computer Engineering California State University)
Naga, N. El (Department of Electrical and Computer Engineering California State University)
Publication Information
JSTS:Journal of Semiconductor Technology and Science / v.10, no.3, 2010 , pp. 213-224 More about this Journal
Abstract
An optically controlled silicon MESFET (OPFET) was fabricated by diffusion process to enhance the quantum efficiency, which is the most important optoelectronic device performance usually affected by ion implantation process due to large number of process induced defects. The desired impurity distribution profile and the junction depth were obtained solely with diffusion, and etching processes monitored by atomic force microscope, spreading resistance profiling and C-V measurements. With this approach fabrication induced defects are reduced, leading to significantly improved performance. The fabricated OPFET devices showed proper I-V characteristics with desired pinch-off voltage and threshold voltage for normally-on devices. The peak photoresponsivity was obtained at 620 nm wavelength and the extracted external quantum efficiency from the photoresponse plot was found to be approximately 87.9%. This result is evidence of enhancement of device quantum efficiency fabricated by the diffusion process. It also supports the fact that the diffusion process is an extremely suitable process for fabrication of high performance optoelectronic devices. The maximum gain of OPFET at optical modulated signal was obtained at the frequency of 1 MHz with rise time and fall time approximately of 480 nS. The extracted transconductance shows the possible potential of device speed performance improvements for shorter gate length. The results support the use of a diffusion process for fabrication of high performance optoelectronic devices.
Keywords
OPFET; MESFET; etching; metallization; diffusion process; quantum efficiency; spectral responsivity; gain-bandwidth; device fabrication; characterization;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
Times Cited By SCOPUS : 0
연도 인용수 순위
1 J.D. Hylton, A.R. Burgers and W.C. Sinke, “Alkaline etching of Reflectance reduction in multicrysttaline silicon solar cells,” Journal of the Electrochemical Society, Vol. 151, Issue 6, pp.G408-G427, 2004.   DOI   ScienceOn
2 S.K. Ghandhi, “VLSI Fabrication Principles – Silicon and Gallium Arsenide, 2nd Ed.,” 1994, John Willey & Sons, Inc.
3 D.K. Schroder, et al, “Free Carrier Absorption in Silicon,” IEEE Trans. On Electron Devices, Vol. ED-25, No. 2, pp. 254-261, 1978.   DOI   ScienceOn
4 S. Sundararajan, B. Bhushan, et.al, “Mechanical Property Measurements of Nanoscale Structures using an atomic Force Microscope,” Ultramicroscopy, Vol. 91, pp. 111-118, 2002.   DOI   ScienceOn
5 F. J. Williams, C.M. Aldao, et al, “Why Si (100) Steps are Rougher After Etching,” Phy. Rev., B, Condens. Matter, Vol. 55, pp. 13829-13834, 1997.   DOI   ScienceOn
6 T. Baum and D.J. Schiffrin, “AFM Study of Surface Finish Improvement by Ultrasound in the Anisotropic Etching of Si (100) in KOH for Micromaching Applications,” J. Micromechanics Microengineering, Vol. 7, pp. 338-342, 1997.   DOI   ScienceOn
7 I. Zubel, et al, “Silicon Anisotropic etching in alkaline solutions II On the Influence of anisotropy on the smoothness of etched surfaces,” Journal “Sensors and Actuators A: Physical, Vol. 70, pp. 260-268, 1998.   DOI   ScienceOn
8 M. Shikida, K. Sato, et al, “Differences in anisotropic etching properties of KOH and TMAH solutions,” Journal “Sensors and Actuators A: Physical,” Vol. 80, pp.179-188, 2000.   DOI   ScienceOn
9 R. Holly and K. Hingerl, “Fabrication of silicon vertical taper structures using KOH anisotropic etching,” Microelectronics Engineering, 83, 1430-1433, 2006.   DOI   ScienceOn
10 A. Tabe, A. Uchiyama, et.al in Proceedings of the 1st International Symposium on Semiconductors wafer bonding: Science and Technology, and Applications, U. Gosels, T, Abe, J. Haisma and M.A. Schmidt, Editors, PV 92-7, p 200, The Electrochemical Society Proceedings Series, NJ (1992).
11 W.P. Maszara, B-L. Jiang et.al, “Role of Surface Morphology in Wafer Bonding,” J. Appl. Phys. Vol. 69, p.257, 1991.   DOI
12 H. Angermann and Carola Klimn, “Wet-chemical treatment and electronic interface properties of silicon solar cell,” Central European Journal of Physics, Vol. 7, 2, pp.363-370, 2009.   DOI
13 S.N. Chattopadhyay and B.B. Pal, “Analytical modeling an Ion-implanted Silicon MESFET in Post-Anneal condition,” IEEE Trans. on Electron Devices, Vol. ED-36, pp.81-87, 1989.   DOI   ScienceOn
14 A.H. Khalid and A.A. Rezazadeh, “Fabrication and Characterization of Transparent-Gate Field Effect Transistors Using Indium Tin Oxide,” IEEE Proceedings – Optoelectronics, Vol. 143, No. 1, pp. 7-11, 1996.   DOI   ScienceOn
15 T. Sugeta and Y. Mizushima, “High Speed Photoresponse Mechanism of a GaAs MESFET,” Japanese Journal of Appl. Physics, Vol. 19, No. 1, pp. L27-29, 1980.   DOI
16 K. Kanemoto, et.al, “Dependence of ion implantation: Induced defects on substrate doping,” J. Appl. Phys. Vol.89, pp.3156-3161, 2001.   DOI   ScienceOn
17 K.L. Narayanan and M. Yamaguchi, “Phosphorous ion implantation in C60 for the photovoltaic applications,” J. Appl. Phys., Vol. 89, pp. 8331-8335, 2001.   DOI   ScienceOn
18 H. Seidel, et al. “Anisotropic Etching of Crystalline in Alkaline Solutions,” J. Electrochemical Society, Vol. 137, No. 11, pp. 3626-3632, 1990.   DOI
19 M.J. Madou, “Fundamentals of Microfabrication, 2nd Ed.,” CRC Press, New York, 2002, p.212.
20 R. Maboudian, R.T. Howe, “Critical Review: Adhesion in Surface Micromechanical Structures,” J. Vac. Sci. Technol. B, vol. 15 (1), p. 1, 1997.   DOI   ScienceOn
21 S. Sundararajan, B. Bhushan, “Static Friction and Surface roughness studies of Surface Micromachined Electrostatic Micromotors using an Atomic Force/Friction Force Microscope,” J. Vac. Sci. Technol. A, Vol. 19, pp.1777-1785, 2001.   DOI   ScienceOn
22 F. Ericson, J. A. Schweitz, “Micromechanical Fracture Strength of Silicon,” J. Appl. Phys., Vol. 68, p.5840, 1990.   DOI
23 T. Yi, C.J. Kim, “Measurement of Mechanical properties for MEMS materials,” Meas. Sci. Technol., Vol. 10, pp. 706-716, 1999.   DOI   ScienceOn
24 C.L. Schow, et al., “A 1-Gb/s monolithically integrated silicon nMOS Optical Receiver,” IEEE Journal of Selected Topics in Quantum Electronics, Vol. 4, p.1035, 1998.   DOI   ScienceOn
25 L. Forbes, et al, “A Model for the Channel Noise of MESFETs Including Hot Electron Effects,” Microelectronics Reliability, Vol. 39, pp. 1773-1786, 1999.   DOI   ScienceOn
26 R.A. Minasian, “Optimum Design of a 4-Gbit/s GaAs MESFET Optical Preamplifier,” Journal of Lightwave Tech., Vol. LT-5, No.3, pp.373-379, 1987.
27 K. Kanemoto, et al., “Dependence of ion implantation: Induced defects in substrate doping,” J. Appl. Phys., Vol. 89, pp.3156-3161, 2001.   DOI   ScienceOn
28 K.L. Narayanan and M. Yamaguchi, “Phosphorous ion implantation in C60 for the photovoltaic applications,” J. Appl. Phys., Vol. 89, pp. 8331-8335, 2001.   DOI   ScienceOn
29 S. N. Chattopadhyay, et al, “Optically controlled Silicon MESFET Modeling Considering Diffusion Process,” Journal of Semiconductor Technology and Science, Vol. 7, No. 3, pp. 196-208, 2007.   DOI   ScienceOn
30 S. Bose, et al, “Optical Radiation and Temperature Dependent Microwave Performance of Optically Biased GaAs Metal-Semiconductor Field Effect Transistors,” Optical. Engineering. (SPIE), Vol. 41, No. 1, pp. 190-199, 2002   DOI   ScienceOn
31 P. Chakrabarti, et al, “An Analytical model of GaAs OPFET,” Solid State Electronics, vol. 39, no. 10, pp. 1481-1490, 1996.   DOI   ScienceOn
32 P. Chakrabarti, et al, “An Improved Model of Ion-Implanted GaAs OPFET,” IEEE Trans. on Electron Devices, Vol. 39, No. 9, pp.2050-2059, 1992.   DOI   ScienceOn
33 S.N. Chattopadhyay and B.B. Pal. “The effect of annealing on the Switching characteristics of an ion-implanted silicon MESFET,” IEEE Trans. on Electron Devices, Vol. ED-36, pp.920-929, 1989.   DOI   ScienceOn
34 S. Mishra, V.K. Singh and B.B. Pal, “Effect of Radiation and Surface Recombination on the Characteristics of an Ion-Implanted –GaAs MESFET,” IEEE Trans. Electron Devices, Vol. 37, pp.2-10, 1990.   DOI   ScienceOn
35 S.R. Saxena, R.B. Lohani, R.U. Khan and B.B. Pal, “Generalized dc model of GaAs optical field effect transistor considering ion implanted profile,” Optical Engineering, Vol. 37, No. 4, p.1343, 1998.   DOI   ScienceOn
36 C. Baack et al., “GaAs M.E.S.F.E.T.: A High-Speed Optical Detector,” Electronics Letters, Vol. 13, p.193, 1977.
37 S. Bose, et al., “Cutoff frequency and optimum noise figure of GaAs optically controlled FET,” Microwave and Optical Technology Letters, Vol. 26, No. 5, p.279, 2000.   DOI   ScienceOn
38 R. Zulegg, “Radiation effects in GaAs FET devices,” Proceedings of the IEEE 77 (1989), p.389.   DOI   ScienceOn
39 J. Graffeuil, et al, “Light induced effects in GaAs FETs,” Electronics Letters. Vol. 15, p. 439, 1979.   DOI   ScienceOn
40 H. Mizuno, “Microwave characteristics of an optically controlled GaAs MESFET,” IEEE Trans. on Microwave Theory & Tech., Vol. MTT 31, p. 596, 1983.   DOI   ScienceOn
41 A.A.A. DeSalles, “Optical control of GaAs MESFET’s,” IEEE Trans. Microwave Theory & Tech., Vol. MTT-31, p. 812, 1983.   DOI   ScienceOn
42 B.B. Pal and S.N. Chattopadhyay, “Time dependent analysis of an ion implanted GaAs OPFET,” IEEE Trans. Electron Devices, Vol. 42, p. 491, 1994.   DOI   ScienceOn
43 C. A. Liechti, “Performance of Dual-gate GaAs MESFET’s as Gain-Controlled Low Noise Amplifiers and High Speed Modulators,” IEEE Trans. on Microwave Theory and Techniques, Vol. MTT-23, No. 6, pp. 461-469, 1975.   DOI
44 G. Breglio, et al, “Two silicon optical modulators realizable with a fully compatible bipolar process,” IEEE Journal of Selected Topics in Quantum Electronics, Vol. 4, p. 1003, 1998.   DOI   ScienceOn
45 V.K. Singh, S.N. Chattopadhyay and B.B. Pal, “Optically Controlled Characteristics in an Ion-Implanted Silicon MESFET,” Solid State Electronics, Vol. 29, pp. 707-711, 1986.   DOI   ScienceOn
46 R. N. Simons and K.B. Bhasin, “Analysis Optically Controlled Microwave /Millimeter-Wave Device Structures,” IEEE Trans. on Microwave Theory and Techniques, Vol. MTT-34, p. 1349, 1986.   DOI
47 J.M. Osterwalder and B.J. Rickett, “GaAs MESFET demodulates gigabit rates from GaAlAs injection laser,” Proceeding of the IEEE, Vol. 67, p. 966, 1979.   DOI   ScienceOn
48 P. Chakrabarti, et al, “Switching Characteristics of an Optically Controlled GaAs-MESFET,” IEEE Trans. on Microwave Theory & Tech., Vol. MTT-42, pp. 365-375, 1994.   DOI   ScienceOn