• 제목/요약/키워드: Normal wave condition

검색결과 61건 처리시간 0.022초

Resistive Grounding Technique of Heat Sink for Reducing Radiation Noise

  • Ahn, Chang-Hoi;Oh, JaeHyun
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권5호
    • /
    • pp.1724-1728
    • /
    • 2014
  • Heat sink has been used to help an electrical device operate in normal temperature condition. But heat sink radiates unwanted electromagnetic wave, which may cause electromagnetic interference problem. A resistance loaded grounding technique is proposed to reduce electromagnetic wave radiation by a heat sink. Numerical simulations are accomplished to find optimal loading resistance. Also electromagnetic fields radiated by from a heat sink are measured and compared with the simulation results. The test results verify the usefulness of the proposed technique.

상용 퍼머넌트 웨이브 약제인 L-cystein의 랫드 피부 투과 특성 (Rat Skin Permeation Characteristics of L-cystein to Common Permanent Wave Drug In Vitro)

  • 김용렬;윤철훈;김낙주
    • 한국환경보건학회지
    • /
    • 제27권4호
    • /
    • pp.73-78
    • /
    • 2001
  • Hair will be persuit of beautifulness of human being in various permanent wave by many kinds of its drugs. Skin is based upon the hair which enroll the body of high living animals and have multiple membrane structure In this study used rat the effects of commercial permanent wave products to skin which are composed with L- cysteine and bases Results are as follow: the content of penetration 4 hors later with steady state and no significant changeable after 20 hours later. In cysteine groups, lag time and permeability coefficient of healthy skin is 2.22hr and 0.13$\mu\textrm{g}$/㎥ hr, lag time and permeability coefficient of old skin is 4.01 hr and 0.108 $\mu\textrm{g}$/㎥ hr . In conclusion of study lag time and permeability coefficient in old skin and wounded skin are faster than healthy skin. We notified that fine rinkle and rash of skin were changeable in the case of treating with permanent wave drugs than normal skin.

  • PDF

진행파 회전형 초음파 모터의 가압력과 구동전압에 따른 공진특성의 변화 분석 (The analysis of the resonance characteristics of a traveling wave type ultrasonic motor by applying the normal force and driving voltage)

  • 오진헌;박철현;임기조;김현후
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
    • /
    • pp.324-324
    • /
    • 2008
  • Piezoelectric ceramics is an active element that makes stator to vibrate to generate rotational force in ultrasonic motors. In drive of ultrasonic motors, many factors that affect to the resonance characteristics of piezoelectric ceramics exist. For example, those factors are bonding condition with elastic body, the magnitude of electric field, the normal force for frictional drive and the emission of heat due to vibration and friction and so on. Therefore, it is important to research the inclination of property variation of piezoelectric ceramics in circumstance that has complex elements. In this paper, we focused and analyzed the resonance characteristics of ultrasonic motor due to the magnitude of the driving voltage and normal force.

  • PDF

Efficient electromagnetic boundary conditions to accelerate optimization of RF devices

  • Cho, Yong-Heui
    • International Journal of Contents
    • /
    • 제7권4호
    • /
    • pp.50-55
    • /
    • 2011
  • To achieve efficient field formulations and fast numerical computations, the reciprocal relations and equivalence between tangential and normal boundary conditions for electromagnetic fields are discussed in terms of the Maxwell's differential equations. Using the equivalence of each boundary condition, we propose the six essential boundary conditions, which may be applicable to matching electromagnetic discontinuities to efficiently design RF devices. In order to verify our approach, the reflection characteristics of a rectangular waveguide step are compared with respect to six essential boundary conditions.

주파수 제어에 의한 MU-60 초음파모터의 온도보상에 관한 연구 (A Study on the temperature compensation of MU-60 Ultrasonic Motor by frequency control)

  • 서기열;신일철;임중열;최장균;차인수
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1997년도 전력전자학술대회 논문집
    • /
    • pp.441-444
    • /
    • 1997
  • This paper describes the bending traveling-wave type ultrasonic motor which generates the traveling wave by combining two standing waves with phase difference time and space. In +2$0^{\circ}C$~3$0^{\circ}C$, the operation characteristic of USM has represented normal condition. But in the other temperature, the operation characteristic of USM has abnormal condition, that is driving frequency, drive current and r.p.m are down. The recent USM has controller without temperature compensation. This study aimed at fuzzy controller which must follow the frequency at operation temperature and then r.p.m and torque increased.

  • PDF

효율적인 QRS 검출과 프로파일링 기법을 통한 심실조기수축(PVC) 분류 (Efficient QRS Detection and PVC(Premature Ventricular Contraction) Classification based on Profiling Method)

  • 조익성;권혁숭
    • 한국정보통신학회논문지
    • /
    • 제17권3호
    • /
    • pp.705-711
    • /
    • 2013
  • 심전도 신호의 QRS 영역은 심장의 질환을 판단하는 중요한 자료로 쓰이는데, 여러 종류의 잡음으로 인해 이를 분석하는데 어려움을 준다. 또한 일반인들의 건강상태를 지속적으로 모니터링 하는 헬스케어 시스템에서는 신호의 실시간 처리가 필요하다. 그리고 생체신호의 특성상 개인 간의 차이가 있음에도 불구하고, 일반적인 ECG 신호의 판단 규칙에 따라 진단을 수행함으로써 성능하락이 나타날 수밖에 없다. 이러한 문제점을 해결하기 위해서는 최소한의 연산량으로 QRS를 검출하고 환자의 특성에 맞게 부정맥을 분류할 수 있는 알고리즘의 설계가 필요하다. 따라서 본 연구에서는 형태연산을 통한 효율적인 QRS 검출과 개인별 정상신호 분류를 위해 해쉬 함수를 적용하여 프로파일링 하였으며, 검출된 QRS 폭과 RR 간격을 이용하여 심실조기수축(PVC)을 분류하는 알고리즘을 개발하였다. 제안한 방법의 우수성을 입증하기 위해 MIT-BIH 부정맥 데이터베이스를 통해 기존 방법과 부정맥 분류 성능을 비교하였다. 성능평가 결과, R파는 평균 99.77%, 정상 신호 분류에 대한 에러율은 0.65%, PVC는 각각 93.29%로 기존 방법에 비해 약 5% 우수하게 나타났다.

접지평면위에 2개의 유전체층을 가지는 도체띠 격자구조에서의 전자파산란 해석 (Analysis of the Electromagnetic Scattering by Conducting Strip Gratings with 2 Dielectric Layers)

  • 김용연;방성일
    • 한국산업정보학회논문지
    • /
    • 제4권1호
    • /
    • pp.102-109
    • /
    • 1999
  • 본 논문에서는 접지평면위에 2개의 유전체 층을 가지는 완전도체 격자구조에서의 전자파 산란문제를 간단한 방수치해석 방법으로 잘 알려진 PMM방법을 적용하여 입사각에 따라 수치해석하였다. 산란전자계는 Floquet 모드 함수의 급수로 전개하였다. 경계조건은 미지의 계수를 구하기 위하여 적용하였고, 도체의 경계조건은 접선성분의 전계와 스트립 위의 전류와의 관계를 위해 적용하였다. 입사각이 수직일 때 비유전율이 증가함에 따라 기하광학적 반사전력의 변하는 최소점은 스트립 폭이 높은 값으로 이동한다는 것은 주목되며, 이때 수직입사시 대부분의 전력은 다른 각도의 방향으로 산란된다.

  • PDF

티오글리콜산의 랫드 피부에 대한 투과 영향 (Effects of Skin Permeation for Rat of Thioglycolic Acid)

  • 정덕채;오세영;황성규
    • 한국환경보건학회지
    • /
    • 제30권2호
    • /
    • pp.65-70
    • /
    • 2004
  • Hair is based upon the skin which enroll the body of high living animals and have multiple membrane structure. This study were used rats and carried out to find out the effects of commercial permanent wave products to skin which are composed of thioglycolic acid and bases. Results were as follows. Permanent wave penetrated to 3 hours later with steady state in skins and was not significant changeable after 20hr later. In case of neutralizer with thioglycolic acid lag time and permeability coefficient in healthy skin were 3.38hr and 0.96$\mu\textrm{g}$/$\textrm{cm}^2$/hr, in old skin were 3.14hr and 0.l28$\mu\textrm{g}$/$\textrm{cm}^2$/hr, and in wounded skin were 3.08hr and 0.157$\mu\textrm{g}$/$\textrm{cm}^2$/hr. In conclusion, lag time and permeability coefficient in old skin and wounded skin were faster than healthy skin. In vivo which was studied by general time and method of permanent wave. We found out that fine rinkle and rash of skin were changeable in the case of treating with permanent wave drugs than normal skin. Also, permanent wave drugs could induced rash and eruption at the skin by the naked eye.

부분 유공케이슨의 Slit 형상에 따른 반사특성 실험 (Experimental Study for Wave Reflection of Partially Perforated Caisson by Slit Shape of Front Wall)

  • 이종인
    • 대한토목학회논문집
    • /
    • 제33권4호
    • /
    • pp.1455-1462
    • /
    • 2013
  • 본 연구에서는 유공부 형상, 상대유수실 폭, 파형경사 등에 따른 유공케이슨의 소파특성을 2차원 및 3차원 실험을 통해 고찰하였다. 파랑이 직각으로 입사하는 경우, 유사한 유공율 조건에서 횡 slit이 종 slit에 비해 반사계수가 약간 작게 계측되었으나 그 차이는 크지 않았다. 그리고 파형경사가 큰 경우가 작은 경우에 비해 약간 낮은 반사계수를 보였다. 경사 입사파 조건에서도 유공율이 유사할 경우, 유공부 형상에 따른 제체 전면의 파고 차이는 거의 발생하지 않았다.

비선형 탄성계수를 이용한 재료변질 상태평가에대한 기초적 연구 (A Basic Research on Estimation of Material Condition by Using Nonlinear Elastic Modulus)

  • 김경조;장경영
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1995년도 춘계학술대회 논문집
    • /
    • pp.348-352
    • /
    • 1995
  • In the conventional linear elasticity, ultrasonic velocity is determined by elastic modulus and density of te medium which ultrasonic wave propagates through. But, practical ultrsonic wave depends on the stress acting in the medium, and as the stress increases such dependency becomes nonlinear. This nonlinear dependencyof ultrasonic velocity on stress can be identified by using nonlinear elastic modulus up to 4th order. In thid paper, with the above background relationships between nonlinear elastic modulus and the internalstatus of materials, normal, plastic deformed or heat stressed, are discussed. For this purpose, a new type of measuring system extended from the general nondestructive UT(ultrasonic test) equipment is constructed.

  • PDF