• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.1-8
• /
• 2012

The purpose of this study were to evaluate the dynamic characteristics of the portable slipmeters with respect to actual slipping and to compare their output with those of force platform. The selected slipmeters were commonly used devices for slipperiness measurement in situ floors. Their output quantity represented force (BOT-3000), loss of energy(British pendulum striker) and angle of inclination(English XL). The validity of these devices was studied with respect to actual slipping using a force platform. The precision of these devices was also evaluated with force platform. Based on dynamics of human subject behavior when slipping during normal walking, the all devices tested in this study showed poor performances: low built up ratio, low normal pressure, and long contact time prior to slip. Nevertheless, their results reasonably correlated with those calculated from the ground reaction forces generated by the operation of the selected slipmeters on the force platform although the absolute values of COF from these three devices could be quite different. Also the results showed good repeatability under the some test conditions.

• Smart Structures and Systems
• /
• v.10 no.4_5
• /
• pp.471-483
• /
• 2012

In this paper, the structural health monitoring (SHM) benchmark problem of the Canton tower is studied. Based on the field monitoring data from the 20 accelerometers deployed on the tower, some modal frequencies and mode shapes at measured degrees of freedom of the tower are identified. Then, these identified incomplete modal data are used to update the reduced finite element (FE) model of the tower by a novel algorithm. The proposed algorithm avoids the problem of subjective selection of updated parameters and directly updates model stiffness matrix without model reduction or modal expansion approach. Only the eigenvalues and eigenvectors of the normal finite element models corresponding to the measured modes are needed in the computation procedures. The updated model not only possesses the measured modal frequencies and mode shapes but also preserves the modal frequencies and modes shapes in their normal values for the unobserved modes. Updating results including the natural frequencies and mode shapes are compared with the experimental ones to evaluate the proposed algorithm. Also, dynamic responses estimated from the updated FE model using remote senor locations are compared with the measurement ones to validate the convergence of the updated model.

• Wind and Structures
• /
• v.13 no.2
• /
• pp.127-144
• /
• 2010

Pressure measurements on static and autorotating flat plates have been recently reported by Lin et al. (2006), Holmes, et al. (2006), and Richards, et al. (2008), amongst others. In general, the variation of the normal force with respect to the angle of attack appears to stall in the mid attack angle range with a large scale separation in the wake. To date however, no surface pressures have been measured on auto-rotating plates that are typical of a certain class of debris. This paper presents the results of an experiment to measure the aerodynamic forces on a flat plate held stationary at different angles to the flow and allowing the plate to auto-rotate. The forces were determined through the measurement of differential pressures on either side of the plate with internally mounted pressure transducers and data logging systems. Results are presented for surface pressure distributions and overall integrated forces and moments on the plates in coefficient form. Computed static force coefficients show the stall effect at the mid range angle of attack and some variation for different Reynolds numbers. Normal forces determined from autorotational experiments are higher than the static values at most pitch angles over a cycle. The resulting moment coefficient does not compare well with current analytical formulations which suggest the existence of a flow mechanism that cannot be completely described through static tests.

• Nutrition Research and Practice
• /
• v.3 no.3
• /
• pp.242-246
• /
• 2009

This study examined the anti-diabetic effect of onion (Allium cepa. Linn) in the streptozotocin (STZ)-induced diabetic rats. Male Sprague-Dawley rats were divided into normal rats fed control diet or supplemented with onion powder (7% w/w) and diabetic rats fed control diet or supplemented with onion powder. Diabetes was induced by a single injection of STZ (60 mg/kg, ip) in citrate buffer. The animals were fed each of the experimental diet for 5 weeks. Blood glucose levels of rats supplemented with onion were lower than those of rats fed control diet in the diabetic rats. Onion also decreased the total serum lipid, triglyceride, and atherogenic index and increased HDL-cholesterol/total cholesterol ratio in the diabetic rats. Glutathione peroxidase, glutathione reductase and glutathione S-transferase activities were high in the diabetic rats compared to normal rats and reverted to near-control values by onion. These results indicate that onion decreased blood glucose, serum lipid levels and reduced renal oxidative stress in STZ-induced diabetic rats and this effect might exert the anti-diabetic effect of onion.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.1
• /
• pp.70-77
• /
• 2005

This paper presents sensorless speed control of a cylindrical permanent magnet synchronous motor (PMSM) using the adaptive integral binary observer. In view of the composition with a main loop regulator and an auxiliary loop regulator, the normal binary observer has the feature of chattering alleviation in the constant boundary layer. However, the steady state estimation accuracy and robustness are dependent upon the thickness of the constant boundary layer. In order to improve the steady state performance of the binary observer, a new binary observer is formed by the addition of extra integral dynamics to the existing switching hyperplane equation. Also, because the parameters of the dynamic equations such as machine inertia or viscosity friction coefficient are not well known and these values can be changed during normal operations, there are many restrictions in the actual implementation. The proposed adaptive integral binary observer applies an adaptive scheme so that the observer may overcome the problems caused by using dynamic equations. The rotor speed is constructed by using the Lyapunov function. The observer structure and its design method are described. The experimental results of the proposed algorithm are presented to prove the effectiveness of the approach.

• The Journal of the Korean life insurance medical association
• /
• v.1 no.1
• /
• pp.110-118
• /
• 1984

The serum total cholesterol levels were measured by Rosenthal modified method for the insured persons who had passed the medical examination in a life insurance company, Seoul. The sera were obtained from 1,878 adults, 626 males and 1,252 fermales, from sep 1980 to Dec. 1981. The results obtained in the measurement were as follows; 1. The mean and standard deviation of serum cholesterol level in the healthy insured persons were $163{\pm}$ in male, and $157{\pm}24mg%$ in female. The difference of the values between male and female showed statistical signifi- (p<0.01). With regard to sex and age differences, female were significantly higher than male in the 10's, and male were higher than female in the 20's and 50's between both sexes. 2. The cholesteol of male was gradully increased about 12mg% according to the increase of every 10-year interval, but no increase was observed from the 40's to the 50's. The cholesterol level of female was higher in the 10's than in the 20's, and was increased gradually from the 20's to the 50's. 3. No significant difference in serum total cholesterol levels between the insured persons and other normal Korean groups was observed; the frequency distribution of the cholestrol level for the population showed normal distribution.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.4
• /
• pp.40-45
• /
• 2008

This paper describes the effects of fly ash replacement on the water tightness of antiwashout underwater concrete, which replaced the cement with fly ash from 0% to 30%. The experimental work was performed to find out the depth of permeation of concrete specimens cast in air and cured in 23 $^{\circ}C$ tap water using an open center pressure type of water permeation tester. The results showed that the permeation depth values of antiwashout underwater concrete were deeper than normal concrete, but that an admixture using fly ash during antiwashout underwater concrete casting in air made it more watertight than normal concrete according to the water permeation testing. SEM observations of the specimens of fly ash antiwashout underwater concrete showed that it wasmore packed with structures because of the pozzolan reaction of the fly ash and cement.

• Phonetics and Speech Sciences
• /
• v.7 no.1
• /
• pp.39-45
• /
• 2015

Changes in speech production in normal elderly might be subtle and gradual. Therefore, an acoustic analysis is appropriate to identify the effect of aging on speech. For this purpose, this study examined four speech parameters; voice onset time (VOT), VOT range, $f_0$ of following vowel($f_0FV$), and $f_0FV$ difference in two age groups, old (mean age 74.57 yrs.) and young (m: 27.43 yrs.). The results show that compared to the older group the younger demonstrated significantly shorter VOTs in lenis and longer in aspirated stop. VOT ranges were relatively broad and consequently overlapped between the phonation types (e.g., lenis, fortis, aspirated). The $f_0FV$ values in the older group which are an integral parameter with VOT were lower compared with the young group. The $f_0FV$ differences in the old female group were significantly narrower than the young female group, therefore, clear distinction became difficult. In conclusion, contrast in temporal information was obscured, and the domain of glottal information was diminished on stop consonants in Korean elderly. The findings suggest that central/peripheral changes by aging could lead to a deficit in coordination between phonation and articulation.

• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.4
• /
• pp.53-63
• /
• 1986

In this study, the stress distribution of rectangular bar under torsion, when warping of both ends is free or constrained, is investigated. Method of separation of variable and Fourier Series are used for the theoretical analysis, and 3dimensional photoelastic stress-freezing method for experimental analysis. The main results are as follows; 1) In the case of warping-constrained rectangular bar, the normal stresses are negligible because they are less then 0.5% of the shear stresses. The maximum normal stress is placed on the point of y=0.61 b when b/a=1 and it gradually moves to the corner y=b when the value of b/a is increased. 2) According to increase of the value of b/a, on the crossection, the maximum shear stress is placed on the middle point of the long side (x=${\pm}a$, y=0) when warping of both ends is free but the middle of the short side (x=0, y=${\pm} b$) when warping is constrained. The stress distribution is straight line when warping is constrained, namely, the stress distribution is proportional to the distance from the axis of centroid, but parabolic when warping is free. 3) The values of the combined stress of warping-constrained bar, if the influence of the loaded point is neglected, are generally smaller than those of warping-free.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.603-608
• /
• 2001

In order to distinguish fault electric motors automatically in real time. an intelligent diagnosis technique may be required. This paper presents an automatic fault detection system for electric motors by using their acoustic noises. Time signals of each candidate motor were measured in an anechoic chamber for further analysis. Spectral analysis was first carried out and they showed that two typical types of fault motors could be successfully distinguished in the frequency domain; bearing faults and scratches. Unlike the trend of normal motors that shows only a single dominant peak at around 2000 ㎐, several peaks are bunched together in bearing fault motors. On the other hand, large frequency noises at around 6500 ㎐ are newly arisen in scratchy fault motors. However, the processing time for spectral analysis was rather long for a real time application in production lines. Thus, a number of band-pass filters were used in the time domain instead for a real time application. Before applying filters, the bands of filters were set from the information of spectral analysis. By applying a set of band-pass filters, the RMS values of each filtered signal were calculated, and thus the normal and damaged motors could be successfully distinguished.