• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.413-414
• /
• 2009

• 대한수학회지
• /
• 제47권2호
• /
• pp.385-407
• /
• 2010

To study the relationship between the levels of chemical pollutants and the number of daily total hospital admissions for respiratory diseases and to find the effect of temperature/relative humidity on the admission number, Wong et al. [17] introduced the varying-coefficient single-index model (VCSIM). As pointed out, it is a popular multivariate nonparametric fitting technique. However, the tests of the model have not been very well developed. In this paper, based on the estimators obtained by the local linear technique, the average method and the one-step back-fitting technique in the VCSIM, the generalized likelihood ratio (GLR) tests for varying-coefficient parts on the VCSIM are established. Under the null hypotheses the new proposed GLR tests follow the $\chi^2$-distribution asymptotically with scale constant and degree of freedom independent of the nuisance parameters, known as Wilks phenomenon. Simulations are conducted to evaluate the test procedure empirically. A real example is used to illustrate the performance of the testing approach.

• Current Applied Physics
• /
• 제18권12호
• /
• pp.1492-1495
• /
• 2018

This paper studies the influence of temperature on electrical resistivity in ${\alpha}-InAs$ thin films between 30 K-2K based on the analysis of Mott VRH model and ES VRH model. The effect of the interactions between electrons at lower temperature must be considered, therefore, ES VRH conduction will dominate mechanism, and the crossover from Mott to ES VRH conduction is observed about 7 K. Based on available experiment data and VRH conduction model, the parameters of VRH conduction are determined. And the calculated values of $T_C$ are consistent with the experimental results. In addition, $R_M/{\xi}$, ${\Delta}_M/kT$, $R_{ES}/{\xi}$ and ${\Delta}_{ES}/kT$ are satisfied with the validity of Mott and ES models. Furthermore, the temperature dependence of resistivity at low temperature obeys a universal scaling law, which well describes the overall temperature range of VRH conduction. However, the values of $T^{\prime}_M$ from the universal function are two order of magnitudes lower than $T_M$ deduced from fitting experiment.

• 한국광학회지
• /
• 제7권4호
• /
• pp.348-356
• /
• 1996

기체의 순간 온도를 측정할 수 있는 펄스 레이저를 사용한 이동형 CARS 분광기를 제작하였다. 이 분광기의 측정 프로그램은 측정한 스펙트럼으로 부터 온도를 얻기 위하여 8가지의 빠른 온도 계산법과 최소제곱법을 포함하고 있다. 빠른 온도 계산법 중 두 가지는 최소제곱법 보다 계산 시간은 훨씬 덜 걸리면서 온도의 분산이 작은 측정 결과를 준다. CARS 온도의 정밀 정확도는 복사온도계를 기준으로 흑연관 흑체로에서 측정하였다. 1000K부터 2400K의 온도 영역에서 정확도는 .+-.2% 이내이고 정밀도는 가장 정밀한 결과를 주는 빠른 온도 계산법을 적용할 때 1600K에서 .+-.35K이다. 순간 온도 측정의 적용 예를 보이기 위하여 이 분광기를 정해진 조건에 있는 난류 연소의 측정에 적용하였다.

• 천문학논총
• /
• 제7권1호
• /
• pp.63-69
• /
• 1992

We have systematically investigated the X-ray spectra of normal galaxies, by using the Imaging Proportional Counter (IPC) data in the Einstein data base. We employed the X-ray color-color plot as well as the standard model fitting method which requires higher signal to noise ratio. We discuss X-ray emission mechanisms in terms of their spectral properties and the signature of cooling flows which are most likely present in X-ray bright early type galaxies. On the average, fits to absorbed thermal spectra show that the X-ray emission temperature of spirals is higher than that of ellipticals. This is consistent with our understanding that accreting binaries are a major X-ray source in spirals, while extended gaseous halos are present in ellipticals. The emission temperature becomes lower with increasing X-ray to optical luminosity ratio in E and S0 galaxies. This result is what we would expect if the emission of X-ray faint early type galaxies consists of a large evolved stellar component, while the gaseous emission becomes dominant in X-ray brighter galaxies. We also find a cool, self-absorbed core in some early type galaxies, which directly indicates the presence of cooling flows in such galaxies.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.191-192
• /
• 2006

The deformation under radial pressure of rectangular dies for metal powder compaction has been investigated by FEM. The explored variables have been: aspect ratio of die profile, ratio between diagonal of the profile and die height, insert and ring thickness, radius at die corners, interference, different insert materials, i. e. conventional HSS, HSS from powders, cemented carbide (10% Co). The analyses have ascertained the unwanted appearance of tensile normal stress on brittle materials, also "at rest", and even some dramatic changes of stress patterns as the die height increases with respect to the rectangular profile dimensions. Different materials behave differently, mainly due to difference of thermal expansion coefficients. Profile changes occur when the dies are heated up to the temperature required for warm compaction. The deformation patterns depend on compaction temperature and thermal expansion coefficients.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.132-135
• /
• 2000

Magneto-resistances of the YBa$_2$Cu$_3$O$_{7-{\delta}}$ based coated conductors fabricated on the tilted single crystalline Ni substrates and RABiTS (rolling assisted bi-axially textured substrate) were measured under various magnetic fields. The activation energies of vortices were estimated from them by fitting equation of p = p$_o$ exp(-U(H,T)/k$_B$T). When currents flew in the rolling direction for the case of the tilted single crystalline YBCO on the RATS, the activation energies were similar to those of c-axis normal YBCO films on the SrTiO$_3$ single crystal substrates [5] and were slightly larger than those of the RABiTS coated conductors. On the contrary, for the currents flowing in the transverse direction, the magnetoresistances show double transitions in the temperature with much smaller activation energies.

• 한국가시화정보학회지
• /
• 제17권2호
• /
• pp.10-16
• /
• 2019

Considering the role of viscosity in the hemorheology, the characteristics of non-Newtonian fluid are important in the pulsatile blood flows. Stenosis, with an abnormal narrowing of the vessel, contributes to block blood flows to downstream tissue and lead to plaque rupture. Therefore, systematic analysis of blood flow around stenosed vessels is crucial. In this study, non-Newtonian behaviors of blood analog fluids around the micro-stenosis with 60 % severity in diameter of $500{\mu}m$ was examined by using CFX under the pulsatile flow conditions with the period of 10 s. Viscosity information of two non-Newtonian fluids were obtained by fitting the value of normal blood and highly viscous blood. As the Newtonian fluid, the water at room temperature was used. During the pulsatile phase, wall shear stress (WSS) is highly oscillated. In addition, high viscous solution gives rise to increases the variation in the WSS around the micro-stenosis. Highly oscillating WSS enhance increasing tendency of plaque instability or rupture and damage of the tissue layer. These results, related to the influence on the damage to the endothelium or stenotic lesion, may help clinicians understand relevant mechanisms.

• 대한기계학회논문집A
• /
• 제35권3호
• /
• pp.251-257
• /
• 2011

본 연구는 차세대 원자로의 후보 재료인 수정 9Cr-1Mo 강에 대한 크리프 균열 성장률 법칙, da/dt=B$(C^*)^q$의 파라메터 B와 q에 대한 통계적 성질에 대하여 취급하였다. 본 해석에 이용된 크리프 균열 성장 데이터는 $600^{\circ}C$의 일정 온도에서 5000N의 동일 하중하의 1/2 CT 시험편에 대하여 크리프 균열 성장 실험을 수행하였다. 크리프 균열 성장 거동은 크리프 균열 성장률 da/dt 와 파괴역학 파라메터 $C^*$와의 실험적 관계식으로부터 통계적으로 해석하였다. 각각의 시험편에 대한 파라메터 B와 q는 최소자승법에 의하여 결정하였다. B와 q에 대한 확률분포함수를 정규분포, 대수정규분포 그리고 와이블분포에 대하여 조사하였다. 본 연구에 의하면, B와 q의 확률분포함수는 대수정규분포와 와이블분포에 비교적 잘 따름을 알았다. 또한 이들 사이에는 강한 양의 선형적인 상관이 있음을 알았다.

• 대한치과보철학회지
• /
• 제44권3호
• /
• pp.284-294
• /
• 2006

Statement of problem. Proliferation of Candida albicans is primarily within the plaque on the fitting surface of the denture rather than on the inflamed mucosa. Consequently, the treatment of the denture is equally important as treatment of the tissue. Cleansing and disinfection should be efficiently carried-out as the organisms can penetrate into the voids of the acrylic resin and grow in them, from which they can continue to infect and reinfect bearing tissues. Purpose. The purpose of this study was to evaluate the applicability of photocatalytic reaction to eliminate Candida albicans from acrylic resin denture base, and to investigate the anti-fungal effect with various UVA illumination time. Materials and Methods. The specimens were cured by the conventional method following the manufacturer's instruction using thermal polymerized denture base resin (Vertex RS: Dentimex, Netherlands). $TiO_2$ photocatalyst sol(LT), which is able to be coated at normal temperature, was made from the Ti-alkoxide progenitor. The XRD patterns, TEM images and nitrogen absorption ability of the $TiO_2$ photocatalyst sol(LT) were compared with the commercial $TiO_2$ photocatalyst P-25. The experimental specimens were coated with the mixture of the $TiO_2$ photocatalyst sol(LT) and binder material (silane) using dip-coater, and uncoated resin plates were used as the control group. Crystallinity of $TiO_2$ of the specimen was tested by the XRD. Size, shape and chemical compositions were also analyzed using the FE-SEM/ EDS. The angle and methylene blue degradation efsciency were measured for evaluating the photocatalytic activity of the $TiO_2$ film. Finally, the antifungal activity of the specimen was tested. Candida albicans KCTC 7629(1 ml, initial concentration $10^5$ cells/ ml) were applied to the experiment and control group specimens and subsequently two UVA light source with 10W, 353 nm peak emission were illuminated to the specimens from 15cm above. The extracted $2{\mu}l$ of sample was plated on nutrient agar plate ($Bacto^{TM}$ Brain Heart Infusion; BD, USA) with 10 minute intervals for 120 minute, respectively. It was incubated for 24 hours at $37^{\circ}C$ and the colony forming units (CFUs) were then counted. Results. Compared the characteristics of LT photocatalyst with commercial P-25 photocatalyst, LT were shown higher activity than P-25. The LT coated experimental specimen surface had anatase crystal form, less than 20 nm of particle size and wide specific surface area. To evaluate the photocatalytic activity of specimens, methylene blue degradation reaction were used and about 5% of degradation rate were measured after 2 hours. The average contact angle was less than $20^{\circ}$ indicating that the LT photocatalyst had hydrophilicity. In the antifungal activity test for Candida albicans, 0% survival rate were measured within 30 minute after irradiation of UVA light. Conclusion. From the results reported above, it is concluded that the UVA-LT photocatalytic reaction have an antifungal effect on the denture surface Candida albicans, and so that could be applicable to the clinical use as a cleaning method.