• Journal of Chest Surgery
• /
• v.31 no.2
• /
• pp.198-202
• /
• 1998

The recurrence of an anterior mediastinal mass was discovered incidentally on the chest film for an asymptomatic 72-year-old female. She underwent the mass resection at the same site in 1989 and was diagnosed as a paraganglioma of the anterior mediastinum. She had poorly controlled hypertension which was converted into normal blood pressure after the first operation. During the follow up, the catecholamine levels were within normal limits, and there were no evidence of recurrence of the tumor. However, 6.3 years later, the mass recurred at the same anterior mediastinum. The patient had no hypertension and catecholamine levels were still within normal limits. The recurring mass was successfully removed and had the same histological findings - recurring paraganglioma.

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.2 s.50
• /
• pp.421-432
• /
• 1995

The influence of lead exposure on renal function was studied. Eighty nine lead exposed workers who worked in 2 storage battery factories, and seventy one control workers were chosen for this study. Blood lead(PbB) and zinc protoporphyrin in whole blood(ZPP) were selected as indicators of lead exposure. As indicators of renal function, urinary N-acetyl-$\beta$-D-glucosaminidase(NAG), blood urea nitrogen(BUN), serum creatinine(S-Cr), total protein in urine(U-TP),and serum uric acid(S-Ua) were selected. The results obtained were as follows: 1. While the mean values of lead exposure indicators of lead workers were significantly different from non-exposed ones, the mean values of NAG, U-TP, BUN and S-Cr of renal function indicators of exposed were also significantly different from non-exposed but their mean values were all within normal limits. 2. BUN, logarithmic U-TP, logarithmic NAG and S-Cr showed statistically significant correlation with PbB. 3. The proportion of workers whose values of renal function indicators were over the normal limits(NAG7.5 U/g Cr ; U-TP10.9 mg/dl ; BUN20 mg/dl ; S-Crl.2 mg/dl ; S-Ua7.0 mg/dl) by the level of lead absorption in terms of PbB and ZPP were calculated. The proportion of workers with over the normal limits of U-TP among total workers showed the dose-response relationship. When age is adjusted, U-TP showed significantly strong dose-response relationship with the level of PbB and ZPP.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.3
• /
• pp.336-341
• /
• 1999

The problem of jointly determining the optimum process mean and screening limits for each market is considered in situations where there are several markets with different price/cost structures. The quality characteristic is assumed to be a normal distribution with unknown mean and known variance. A quadratic loss function is utilized for developing the economic model. Methods of finding the optimum process mean and screening limits are presented and a numerical example is given.

• International Journal of Quality Innovation
• /
• v.2 no.1
• /
• pp.50-57
• /
• 2001

The economic design of specification limits must be determined on an economic basis where we minimize total loss to society, which consists of both the producer and the consumer. Economic specification limits have been developed based on the assumption that the quality characteristic is normally distributed. Unfortunately, the assumption is not to meet some practical cases. In this paper, some non-normal distributions are considered for quality characteristic with geometrical features. An economic model for selecting the optimum specification limits on the basis of minimizing total cost is introduced. A case study is presented to illustrate the application in practice.

• Journal of Korean Society for Quality Management
• /
• v.28 no.2
• /
• pp.161-175
• /
• 2000

The problem of jointly determining the optimum process mem and screening limits for each market is considered in situations where there are several markets with different price/cost structures. Two inspection procedures are considered; an inspection based on the quality characteristic of interest, and an inspection based on a surrogate variable which is highly correlated with the quality characteristic. The quality characteristic is assumed to be a normal distribution with unknown mean and known variance. A Taguchi's quadratic loss function is utilized for developing the economic model for determining the optimum process mean and screening limits. A numerical example is given.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.2
• /
• pp.153-165
• /
• 1997

In male reproducible health, fertility and IVF (in-vitro fertilization), semen analysis has been most important. Semen analysis can be divided into concentration, motional and morphological analysis of sperm. The existing method which was developed earlier to analyze semen concentrated on the sperm motility analysis. To provide more useful and precise solutions for clinical problems such as infertility, semen analysis must include sperm morphological analysis. But the traditional tools for semen analysis are subjective, imprecise, inaccurate, difficult to standardize, and difficult to reproduce. Therefore, with the help of development of microcomputers and image processing techniques, we developed a new sperm morphology analyzer to overcome these problems. In this study the agreement on percent normal morphology was studied between different observers and a computerized sperm morphology analyzer on a slide-by-slide basis using strict criteria. Slides from 30 different patients from the SNUH andrology laboratory were selected randomly. Microscopic fields and sperm cells were chosen randomly and percent normal morphology was recorded. The ability of sperm morphology analyzer to repeat the same reading for normal and abnormal cells was studied. The results showed that there was no significant bias between two experienced observers. The limits of agreement were 4.1%${\sim}$-3.8%. The Pearson correlation coefficient between readers was 0.79. Between the manual and sperm morphology analyzer, the same findings were reported. In this experiments the slides were stained by two different methods, PAP and Diff-Quik staining methods. The limits of agreement were 7.2%${\sim}$-5.7% and 6.0%${\sim}$-6.3%, respectively. The Pearson correlation coefficients ware 0.76 and 0.91, respectively. The limits of agreement was tighter below 20% normal forms. In the experiments of repeatability, 52 cells stained by PAP and Diff-Quik staining methods were analyzed three times in succession. Estimating pairwise agreement, the kappa statistic for the pairs were 0.76, 0.81, 0.86, and 0.75, 0.88, 0.88 respectively. In this study it was shown that there was good agreement between manual and computerized assessment of normal and abnormal cells. The repeatability and agreement per slide of computerized sperm morphology analyzer was excellent. The computer's ability to classify normal morphology per slide is promising. Based on results obtained, this system can be of clinical value both in andrology laboratories and IVF units.

• Physical Therapy Korea
• /
• v.6 no.1
• /
• pp.35-46
• /
• 1999

The purposes of this study were to evaluate and compare the limits of stability(LOS) at different body positioning(standing and one leg standing) in normal 20 years of age. Fourty subjects participated in the study. Subjects comprised 20 males and 20 females who without neurologic, orthopaedic impairments and balance performance impaired. The LOS was measured at Two Feet Forceplate and One Leg Forceplate with BPM(Balance Performance Monitor) Dataprint Software Version 5.3. The subjects stood 4 inches between the feet at Two Feet Forceplate and stood one legged at One Leg Forceplate. In this study applied the paired t-test and independent t-test to determine the statistical significance of results at 0.01 and 0.05 level of significance. The results of this study were as follows: 1) The anteroposterior LOS significantly increased with one legged stance(p<0.05). 2) The mediolateral LOS significantly decreased with one legged stance(p<0.01). 3) There were significant difference posterior LOS in standing and anterior LOS in one legged stance according to sexual difference(p<0.05). 4) The mediolateral LOS was not significant difference between standing and one legged stance according to sexual difference(p>0.05).

• Journal of Radiation Protection and Research
• /
• v.19 no.1
• /
• pp.23-35
• /
• 1994

A computer code DRL was developed to calculate the derived release limits at CANDU type nuclear power plants. The derived release limits resulting from DRL code is to set guidelines for the release of radionuclides in airborne and water-borne effuents during normal operations of a CANDU type nuclear power plant. The DRL code generally follows the methodology Prescribed in the CSA standard N288.1-M87 and uses the Parameter values recommended in the same standards. The DRL code was used to calculate a set of preliminary derived release limits for the Wolsong NPP.

• Journal of Korean Society for Quality Management
• /
• v.31 no.1
• /
• pp.109-122
• /
• 2003

This paper presents a robust process capability index(PCI) based on the expected loss derived from the empirical distribution function(EDF). We propose the EDF expected loss in order to develop a PCI that does not depends on the underlying process distribution. The EDF expected loss depends only on the sample data, so the PCI based on it is robust and it does nor require complex calculations. The inverted normal loss function(INLF) is employed in order to overcome the drawback of the quadratic loss which may Increase unboundedly outside the specification limits. A comprehensive simulation study was performed under various process distributions, in order to compare the accuracy and the precision of the proposed PCI with those of the PCI based on the expected loss derived from the normal distribution. The proposed PCI turned out to be more accurate than the normal PCI in most cases, especially when the process distribution has high kurtosis or skewness. It is expected that the proposed PCI can be utilized In real processes where the true distribution family may not be known.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1530-1535
• /
• 2003

The automatic load transfer switch (ALTS) typically automatically transfers electrical loads from a normal electrical power source to an emergency electrical power source upon reduction or loss of normal power source voltage. It can also automatically re-transfer the load to the normal power source when the normal voltage has been restored within acceptable limits. The transfer operation of ALTS is accomplished by a spring-driven linkage mechanism. In this paper we build a dynamic model of driving mechanism for ALTS using ADAMS and checked the characteristics of the transfer operation. Finally we performed a detailed design of the driving mechanism through results of analysis and confirmed it to satisfy design requirements.