• Ocean and Polar Research
• /
• v.25 no.2
• /
• pp.133-145
• /
• 2003

Deep-sea surface sediments were collected using a multiple corer at 20 stations of Clarion-Clipperton fracture zone in the northeast equatorial Pacific to understand latitudinal and longitudinal variations of geotechnical properties. There was a distinct latitudinal variation of geotechnical properties in the study area. The northern sediments showed finer grain size, lower water content and porosity, higher bulk density and specific grain density, lower liquid limits and plastic limits than their southern counterparts. The northern sediments are classified into inorganic clays of low plasticity (fat clays) on plasticity charts and normal to active clay on activity chart, whereas, the southern sediments are classified into fine-grained, highly-plastic, inorganic and biogenic silt or organic clays on plasticity chart and normal to very active clay on activity chart. When shear strength are considered, the northern sediments were found to be in unconsolidated states, while the southern ones to be normal to over-consolidated states. These latitudinal variations in sediment characteristics are likely caused by differences in productivity of surface water that controls sediment compositions, sedimentation rates, and grain solubility.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.211-219
• /
• 2000

This paper simulated surface grinding process with statistically simulated grinding wheel topography, considering ridge formation phenomenon when grain scratch workpiece. Wheel grain is modeled as hybrid sphere and cone. Grinding wheel characteristic was evaluated with stylus by expanding the scanning region of the profilometer from a straight line to a plane. Each grain's diameter and semi-angle are assumed as normal distribution, each grain's protrusion height from wheel plane is assumed gamma distribution. So grinding wheel is simulated with grain's position randomly distributed without overlapping. Ground surface is 3-dimensionally simulated considering ridge formation of workpiece by each grain's cutting, and then surface profile and surface roughness parameters are compared with real ground workpiece.

• The Journal of Korean Medical History
• /
• v.24 no.2
• /
• pp.105-116
• /
• 2011

Objective : Foods could be materia medica through food-therapy in oriental medicine. "Sikryochanyo" is a food-therapy book totally. Therefore, there are many kinds of food are treated as materia medica. Method : Finding out cases of food-therapy with Five-Grain(RIce, Barley, Millet, Soy, Panicum miliaceum) in "Sikryochanyo" Result : In "Sikryochanyo", there were many methods of food-therapy with Five-Grain. Five-Grain were treated as materia medica even though they were usual food as normal meal. Conclusion : Five-Grain used in "Sikryochanyo" as many types of themselves and they had objectively effects comparing with "Materia Medica".

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.4
• /
• pp.261-265
• /
• 2001

This study was carried out to select randomly amplified polymorphic DNA (RAPD) markers associated with grain weight of a large-grain mutant, Hyacp 39-26-1, derived from anther culture of a rice cultivar, 'Hwayeongbyeo'. The segregation mode for grain weight in an F$_2$ population from a cross, 'Hwayeongbyeo/Hyacp 39-26-1', showed a nearly normal distribution. One hundred and ninety-one F$_2$plants ranged from 21.8 g to 34.7 g in 1,000-grain weight with a mean of 26.8 g. Five hundred and twenty primers were used to detect the RAPD markers associated with the grain weight of the large-grain mutant. Of these primers, 54 primers showed polymorphism between 'Hwayeongbyeo' and 'Hyacp 39-26-1'. Four RAPD markers (OPB18, OPH07, OPT20, and OPX20) were significantly related to the grain weight of twenty one F$_3$ lines derived from the cross, 'Hwayeongbyeo/Hyacp 39-26-1'. This RAPD marker could facilitate the early and efficient selection of high-yield lines through improvement of grain weight in rice.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.39-39
• /
• 2003

Molecular dynamics (MD) simulation was performed to study the stress induced grain boundary migration caused by the interaction of dislocations with a gain boundary. The simulation was carried out in a Ni block (295020 atoms) with a ∑ = 5 (210) grain boundary and an embedded atom potential for Ni was used for the MD calculation. Stress was provided by indenting a diamond indenter and the interaction between Ni surface and diamond indenter was assumed to have a fully repulsive force to emulate a faction free surface. Results showed that the indentation nucleated perfect dislocations and the dislocations produced stacking faults in the form of a parallelepiped tube. The parallelepiped tube consisted of two pairs of parallel dislocations with Shockley partials and was produced successively during the penetration of the indenter. The dislocations propagated along the parallelepiped slip planes and fully merged onto the ∑ = 5 (210) grain boundary without emitting a dislocation on the other grain. The interaction of the dislocations with the grain boundary induced the migration of the grain boundary plane in the direction normal to the boundary plane and the migration continued as long as the dislocations merged onto the grain boundary plane. The detailed mechanism of the conservative motion of atoms at the gram boundary was associated with the geometric feature of the ∑ = 5 (210) grain boundary.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.2
• /
• pp.9-13
• /
• 2017

This study presents a simple method to control the seed orientation which leads to the various growth characteristics of a single grain REBCO (RE: rare-earth elements) bulk superconductors. Seed orientation was varied systematically from c-axis to a-axis with every 30 degree rotation around b-axis. Orientations of a REBCO single grain was successfully controlled by placing the seed with various angles on the prismatic indent prepared on the surface of REBCO powder compacts. Growth pattern was changed from cubic to rectangular when the seed orientation normal to compact surface was varied from c-axis to a-axis. Macroscopic shape change has been explained by the variation of the wetting angle of un-reacted melt depending on the interface energy between $YBa_2Cu_3O_{7-y}$ (Y123) grain and melt. Higher magnetic levitation force was obtained for the specimen prepared using tilted seed with an angle of 30 degree rotation around b-axis.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.223-230
• /
• 2004

In order to improve the productivity and quality of the hot rolled products, many morden mills have continuously required advanced roll materials. The introduction of HSS rolls in early stands of the Hot Strip Mill brought the excellent performance in wear resistance and surface roughness. Ni-grain rolls used in the later stands was needed to improve the roll performance. Therefore, the carbide reinforced Ni-grain roll was developed. The present paper will describe the development of carbide reinforced rolls made by INI STEEL and the results of mill tests. The wear resistance was increased upto $40\%$ and the anti-accident ablility was remarkably improved compared to the normal Ni-rain roll.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.1
• /
• pp.32-37
• /
• 2000

The in vitro culture of rice panicles is a culturing technique only panicle without other organs in culture solution containing organic substance, so that would be useful to study how assimilate supply affects grain development and maturation. To find the optimum stage for in vitro culture, rice panicles grown in greenhouse were sampled periodically after anthesis and cultured in nutrient medium. The panicles older than 1 weeks after anthesis had produced normal grains. Grain-filling was apparently dependent upon sucrose concentration (8-12 %) in medium, but not affected by nitrogen concentration supplied with glutamine. As far as rice panicle was supplied with sucrose and N in nutrient medium, grains continued accumulation of dry matter and maturation regardless to light condition. Considerably, grain-filling was improved when panicles were positioned horizontally inside flask, so that each grain was partially submerged to nutrient medium.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.3
• /
• pp.219-225
• /
• 1981

Strong wind of 6.5m/s from electric fan was applied to rice at heading stage to find out the nature of wind damage to panicle. Damaged panicles caused by typhoon were sampled out of field to measure the yield and milling components. Wind-treated glumes were developed into two forms, fertile and sterile, and each of them showed all degree of glume discoloration. The number of fertile grains were higher than sterile grains in a damaged panicle. Averagesdegree of glume discoloration was higher in not flowered glume than in flowered glume. The more recently flowered glumes resulted the higher degree of discoloration among flowered glume. The percent of sterile grain to total number of grains was the highest at stage of just flowering. The glume discoloration representing wind damage at heading state advanced in degree in ten days after treatment compared to that just after treatment. Grain length and grain width were decreased with the increased degree of glume discoloration, while grain thickness was not changed greatly. Chalkiness was a little higher in damaged grain than in normal grain without definite trends by degree of discoloration. Ripening ratio, 1000 grain weight and yield decreased with increased degree of glume discoloration in damaged panicle by typhoon. Decreasing order in yield was white rice, rough rice and brown rice. Ratio of brown rice to rough rice increased, white rice to brown rice decreased, and milling recovery was not changed greatly with increased degree of 히ume discoloration.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.492-495
• /
• 1987

In this study, PLZT ceramics were fabricated by freeze-drying and normal sintering method. The compositional rate of specimen was selected 9/65/35 (La/Zr/Ti) which have good optical and dielectric properties, sintering time was varied 1, 10, 30, 40, 50, 55, 60 and 65 hr at $1250^{\circ}C$. After sintering, the optical and dielectric properties were investigated with the grain size. As the result of the experiment, freeze-dried powder appeared particle size less than 1 um. The relative dielectric constant was increased linearly with the sintering time, specimen which sintered for 65 hr had the highest value, 5780. Grain was grown with increasing time, in the case of specimen sintered for 60 hr, the grain size was 8.4 um. Transmittance was increased with the grain size. In the case of 8.4 um grain size, the transmittance was 56 %. Curie temperature was decreased linearly by the surface-layer effect of space-charge, in the case of grain size which were 1.8 um and 8.4 um, appeared at $100^{\circ}C$ and $80^{\circ}C$, respectively.