• Nuclear Engineering and Technology
• /
• v.50 no.7
• /
• pp.1131-1137
• /
• 2018

The effect of a serrated grain boundary on stress corrosion cracking (SCC) of Alloy 600 was investigated in terms of improvement of SCC resistance. Serrated grain boundaries and straight grain boundaries were obtained by controlled heat treatment. SCC cracks preferentially initiated and grew at grain boundaries normal to the tensile loading axis. Resolved tensile stress normal to the grain boundary was lower in serrated grain boundaries compared to straight grain boundaries. The specimen with serrated grain boundaries showed higher SCC resistance than that with straight grain boundaries due to a lower resolved tensile stress normal to the grain boundary.

• Journal of the Korean Ceramic Society
• /
• v.32 no.2
• /
• pp.147-154
• /
• 1995

Abnormal grain growth behavior of BaTiO3 ceramics with controlling of particle size distribution of calcined powder was investigated. The particle size distribution was controlled by changing the calcining temperature or by using of classification and regrinding process. With broadening of the normallized size distribution in calcined powder, it showeda normal grain growth behavior in sintered body due to an increase of volume fraction of seed grain in the calcined powder. It was supposed that the seed grains could easily contact each other for the rapid grain growth during sintering process and resulted in fast switching-over from abnormal to normal grain growth stage.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.3
• /
• pp.52-56
• /
• 2022

Single-grain (c-normal or c-parallel) and multi-grain YBCO superconductors were prepared by a melt growth process with/without seeding. The magnetic levitation force and trapped magnetic field at liquid N₂ temperature (77 K) of the YBCO superconductors were investigated. Samples for the levitation force measurement were zero-field cooled (ZFC) to 77 K, and samples for trapped field measurement were field-cooled (FC) using Nd magnets. As for the magnetic levitation force, the c-normal, single grain sample showed the largest value, whereas the multi-grain sample showed the lowest value. The trapped magnetic field of the c-normal and c-parallel single-grain samples was 4-5 times that of the multi-grain sample. In addition, as the external magnetic field (the number of magnets) increased, the both properties increased proportionally. These results were explained in terms of the orientation dependence of the levitation forces and the magnetic field trapping capability of the YBCO superconductor.

• Journal of the Korean Ceramic Society
• /
• v.36 no.4
• /
• pp.372-379
• /
• 1999

Hihg-toughened ceria-stabilized tetragonal zirconia ceramics with irregular grain shape and undulated grain boundary was prepared by ceria doping. Irregularity of grain shapes was increased with the amount of doped ceria. But in case of the large amount of doped ceria grain boundary was migrated to the reverse direction of DIGM. Ceria-stabilized zirconia ceramics annealed at 1650$^{\circ}C$ for 2h after twice dippings into cerium nitrate solu-tion of 0.2M and sintering at 1500$^{\circ}C$ for 2h showed the highest grain boundary length with a value of 23.6$\mu\textrm{m}$ Ceria concentration difference between convex and concave sides in irregular grains was observed over 1 mol% but not observed in normal grains, Specimens with normal grain shape showed intergranular fracture mode whereas the specimens with irregular grain shape showed transgranular fracture mode.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.2
• /
• pp.122-127
• /
• 2000

Microstructural evolutions in ceria-stabilized zirconia (Ce-TZP) and alumina-dispersed Ce-TZP ceramics were investigated as functions of doping and annealing conditions. All of sintered specimens showed the relative density over 99 %. Sintered specimens had linear grain boundaries and normal grain shapes, but ceria-doped specimens had irregular grain shapes and nonlinear grain boundaries due to the diffusion-induced grain boundary migration during annealing at $1650^{\circ}C$ for 2 h. Mean grain boundary length of Ce-TZP with irregular grain shapes was higher than that of normal grain shapes, and was a value of 23pm at the maximum. Alumina particles dispersed in Ce-TZP inhibited the grain growth of zirconia particles. $Al_2O_3$Ce-TZP doped with ceria and annealed at $1650^{\circ}C$ for 2 h showed irregular grain shapes as well as small grain size. Added alumina particles showed the grain growth during sintering or annealing, and they changed the position from grain boundary to inside of the grains during the annealing. The specimens with normal grain shapes showed an intergranular fracture mode, whereas the specimens with irregular grain shapes showed a transgranular fracture mode during the crack propagation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.1
• /
• pp.29-35
• /
• 2002

This study was carried out to investigate the characteristics of shattering habit and germination of offtype rice plants collected in Korea which were classified into seven groups based on grain characteristics. In the long-grain red rice group, the short-grain red rice group, the long-grain normal rice group, and the long-grain waxy rice group, the tensile strength of grain and primary rachis branch was relatively low and the fiber cell of the primary rachis branch was short. Characteristics of shattering-related traits and germination in relation to grain and esterase isozyme zymogram type of off-type rice plants. In most lines of the extremely late and sterile rice group, the tensile strength of grain was low, while that of primary rachis branch was high, and the fiber cell was long. However, in the type 1 esterase isozyme zymogram(EIZ) lines among the long-grain normal rice group and the type 6 and 5+6 EIZ plants among the extremely late and sterile rice group, the tensile strength of grain was relatively higher. The long-grain waxy rice group and the type 3 EIZ lines among the long-grain red rice group, showed higher germinability than did cultivars which are known to germinate well even in low-temperature. The other off-type rice group, except for the short-grain waxy rice group and type 1 and 7 EIZ lines among the long-grain normal rice group, had higher germination speed than that of the cultivars.

• 한국해양학회지
• /
• v.28 no.2
• /
• pp.114-120
• /
• 1993

Numerical method of nonlinear regression was introduced to characterize grain-size distribution more effectively than using the traditional textural parameters. This technique proved critical particularly to multimodal size distributions, as exemplified by samples from Cheju strait continental shelf. Grain-size analysis of samples collected from the Cheju Strait continental shelf reveals that 86% of the grain-size distributions are multimodal. As multimodal grain-size distribution deviates from the statistical (log) normal distribution, the grain-size parameters traditionally used in sediment studies do not describe the distribution efficiently. Therefore, the use of grain-size curves into elementary normal component curves was used. Means and standard deviations of 387 decomposed normal components were decided by a decomposition method (nonlinear least square regression) from 167 size curves of the Cheju Strait sediments. The mean values of decomposed normal components show peaks at 1-3 phi and 8-9 phi size classes. The plot of mean values of the coarse fraction normal components on the map shows a characteristic and complex areal distribution. On the basis of the areal distribution of the mean values of the components and that of isopach of total Plenipotence sediment, the areal distribution of layers composing a transgressive sand of Late Plenipotence age were revealed.

• Journal of the Korean Ceramic Society
• /
• v.25 no.4
• /
• pp.329-334
• /
• 1988

Kinetics of grain growth in PLZT ceramics during isothermal heat treatment and hot-pressing were investigated and the published data on grain growth were reanalyzed. It was found, in many cases, that the errors were introduced by ignoring the initial grain size. The grain growth of PLZT ceramics was confirmed to follow the parabolic normal growth : D2-Do2=Kt.

• Korean Journal of Materials Research
• /
• v.14 no.12
• /
• pp.829-834
• /
• 2004

Annealing of $Cu(B)/Ti/SiO_2$ in vacuum has been carried out to investigate the effects of Ti underlayer on microstructure in $Cu(B)/Ti/SiO_2$ structures. For comparison, $Cu(B)/Ti/SiO_2$ structures was also annealed in vacuum. Three different temperature dependence of Cu growth can be seen in $Cu(B)/Ti/SiO_2$; B precipitates- pinned grain growth, abnormal grain growth, normal grain growth. The Ti underlayer having a strong affinity for B atoms reacts with the out-diffused B to the Ti surface and forms titanium boride at the Cu-Ti interface. The formation of titanium boride acts as a sink for the out-diffusion of B atoms. The depletion of boron in grain boundaries of Cu films, as results of the rapid diffusion of B along the grain boundaries and the insufficient segregation of B to the grain boundaries, induces grain boundaries to migrate and causes the abnormal grain growth. The increased bulk diffusion coefficient of B within Cu grains can be responsible for the normal grain growth occurring in the annealed $Cu(B)/Ti/SiO_2\;at\;600^{\circ}C$. In contrast, the $Cu/SiO_2$ structures show only the abnormal growth of grains and their sizes increasing as the temperature increases above $400^{\circ}C$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.3
• /
• pp.386-392
• /
• 1996

A numerical method based on genetic algorithms was introduced to characterize the grain-size distribution more effectively. This technique was proved significant particularly for multimodal size distributions, as was verified for samples from Korea Strait continental shelf. Sediment samples collected from the Korea Strait continental shelf revealed that $96\%$ of the grain-size distributions were multimodal. Therefore, the use of grain-size parameters was not the ideal method. As an alternative method, the decomposition of sue curves into elementary normal component curves was used. Means and standard deviations of 593 decomposed normal components were calculated by a numerical method from 268 size curves of Korea Strait sediments. The mean values of decomposed normal components showed peaks at $1\~3\phi\;and\;7\~9\phi$ size classes. The plot of mean and standard deviation values of the coarse fraction normal components on the map showed a characteristic areal distribution. The characteristic distribution was found to derive from underlying Pleistocene sediment on the basis of sea bottom geologic distribution of the area. The method of decomposition into normal components was found to be more effective than the analysis using traditional grain-size parameters in investigation of multimodal size distribution of Korea Strait shelf sediment.