Effect of serrated grain boundary on stress corrosion cracking of Alloy 600 |
Kim, H.P.
(Nuclear Materials Research Division, Korea Atomic Energy Research Institute)
Choi, M.J. (Nuclear Materials Research Division, Korea Atomic Energy Research Institute) Kim, S.W. (Nuclear Materials Research Division, Korea Atomic Energy Research Institute) Kim, D.J. (Nuclear Materials Research Division, Korea Atomic Energy Research Institute) Lim, Y.S. (Nuclear Materials Research Division, Korea Atomic Energy Research Institute) Hwang, S.S. (Nuclear Materials Research Division, Korea Atomic Energy Research Institute) |
1 | P.E. Macdonald, V.N. Shah, L.W. Ward, P.G. Ellison, Steam Generator Tube Failures, NUREG/CR, 1966, pp. 78-114, 6365. |
2 | P. Tran, PWR Steam Generator Replacement Survey Results, EPRI, 2005, 1011259. |
3 | B. Grimmel, U.S. Plant Experience with Alloy 600 Cracking and Boric Acid Corrosion of Light-water Reactor Pressure Vessel Materials, NUREG, 2005, pp. 9-13, 1823. |
4 | Y.S. Lim, H.P. Kim, S.S. Hwang, Microstructural characterization on intergranular stress corrosion cracking of alloy 600 in PWR primary water environment, J. Nucl. Mater. 440 (2013) 46-54. DOI |
5 | Y.S. Yi, S.H. Eom, H.P. Kim, J.S. Kim, Nickel boride (NiB) as an inhibitor for an IGSCC of alloy 600 and its applicability, J. Nucl. Mater. 347 (2005) 151-160. DOI |
6 | Y.S. Lim, S.S. Hwang, S.W. Kim, H.P. Kim, Primary water stress corrosion cracking behavior of an alloy 600/182 weld, Corros. Sci. 100 (2015) 12-22. DOI |
7 | S.S. Hwang, Y.S. Lim, S.W. Kim, D.J. Kim, H.P. Kim, Role of grain boundary carbides in cracking behavior of Ni base alloys, Nucl. Eng. Tech. 45 (2013) 73-79. DOI |
8 | S.S. Hwang, H.P. Kim, SCC analysis of alloy 600 tubes from a retired steam generator, J. Nucl. Mater. 440 (2013) 129-135. DOI |
9 | S.W. Kim, H.P. Kim, Electrochemical noise analysis of PbSCC of Alloy 600 SG tube in caustic environments at high temperature, Corros. Sci. 51 (2009) 191-196. DOI |
10 | S.S. Hwang, H.P. Kim, Y.S. Lim, J.S. Kim, L. Thomas, Transgranular SCC mechanism of thermally treated alloy 600 in alkaline water containing lead, Corros. Sci. 49 (2007) 3797-3811. DOI |
11 | B.S. Rho, H.U. Hong, S.W. Nam, Analysis of the intergranular cavitation of Nb-a 286 alloy in high temperature low cycle fatigue using EBSD technique, Scr. Mater. 43 (2000) 167-173. DOI |
12 | M. McMurtrey, G. Was, L. Patrick, D. Farkas, Relationship between localized strain and irradiation assisted stress corrosion cracking in an austenitic alloy, Mater. Sci. Eng. A 528 (2011) 3730-3740. DOI |
13 | K. Fukuya, H. Nishioka, K. Fujii, T. Miura, T. Torimaru, An EBSD examination of SUS316 stainless steel irradiated to 73 dpa and deformed at 593 K, J. Nucl. Mater. 417 (2011) 958-962. DOI |
14 | G. Palumbo, P. King, P. Lichtenberger, K. Aust, U. Erb, Grain boundary design and control for intergranular stress-corrosion resistance, Scr. Metall. Mater. 25(1991) 1775-1780. DOI |
15 | E. West, G. Was, A model for the normal stress dependence of intergranular cracking of irradiated 316 L stainless steel in supercritical water, J. Nucl. Mater. 408 (2011) 142-152. DOI |
16 | E.A. West, M.D. McMurtrey, Z. Jiao, G.S. Was, Role of localized deformation in irradiation-assisted stress corrosion cracking initiation, Metall. Trans. A 43 (2012) 136-146. DOI |
17 | T. Watanabe, An approach to grain boundary design for strong and ductile polycrystals, Res. Mechanica 11 (1984) 47-84. |
18 | S.S. Hwang, H.P. Kim, D.H. Lee, U.C. Kim, J.S. Kim, The mode of stress corrosion cracking in Ni-base alloys in high temperature water containing lead, J. Nucl. Mater. 275 (1999) 28-36. DOI |
19 | V. Gertsman, S.M. Bruemmer, Study of grain boundary character along intergranular stress corrosion crack paths in austenitic alloys, Acta Mater. 49 (2001) 1589-1598. DOI |
20 | E.M. Lehockey, A.M. Brennenstuhl, I. Thompson, On the relationship between grain boundary connectivity, coincident site lattice boundaries, and intergranular stress corrosion cracking, Corros. Sci. 46 (2004) 2383-2404. DOI |
21 | J. Gorman, PWR Reactor Vessel Alloy 600 Issues', Companion Guide to the ASME Boiler & Pressure Vessel Code : Criteria and Commentary on Select Aspects of the Boiler & Pressure Vessel and Piping Codes, ASME press, 2009 (chapter 44). |
22 | C. Shoemaker, in: Proc.: Workshop on Thermally Treated Alloy 690 Tubes for Nuclear Steam Generators (NP-4665S-sr), EPRI, Palo Alto, CA, 1986. |
23 | J. Harris, V. Moroney, J. Gorman, Pressurized Water Reactor Generic Tube Degradation predictions-U.S. Recirculating Steam Generators with Alloy 600TT and Alloy 690TT, EPRI, July 2003, 1003589. |
24 | S.I. Baik, M.J. Olszta, S.M. Bruemmer, D.N. Seidmana, Grain-boundary structure and segregation behavior in a nickel-base stainless alloy, Scr. Mater. 66 (2012) 809-812. DOI |
25 | H. Kawamura, H. Hirano, Role of grain boundary characteristics in caustic IGA/SCC resistance of thermally-treated Alloy 690 and shot-peened Alloy 800, in: Proc. 9th 11th International Symposium on Environmental Degradation of Materials in Nuclear Power SystemeWater Reactors, 1999, pp. 601-610. |
26 | S.S. Hwang, H.P. Kim, D.H. Lee, U.C. Kim, J.S. Kim, Corrosion behavior of Ni-based alloys in lead-contaminated water, in: Proc. Contributions of Materials Investigation to the Resolution of Problems Encountered in Pressurized Water Reactors, vol. 1, French Nuclear Energy Society, Societe Francaise d'Energie Nucleaire [SFEN], Fontevraud, France, 1998, pp. 403-415. |
27 | H.U. Hong, I.S. Kim, B.G. Choi, M.Y. Kim, C.Y. Jo, The effect of grain boundary serration on creep resistance in a wrought nickel-based superalloy, Mat. Sci. Eng. A 517 (2009) 125-131. DOI |
28 | T. Sakai, T. Senjuh, K. Aoki, T. Shigemitsu, Y. Kishi, Lead-Induced stress corrosion cracking of Alloy 600 and 690 in high-temperature water, in: Proc. 5th International Symposium on Environmental Degradation of Materials in Nuclear Power System-Water Reactors, 1991, pp. 764-772. |
29 | J.M. Larson, S. Floreen, Metallurgical factors affecting the crack growth resistance of a superalloy, Metall. Trans. A 8 (1977) 51-55. DOI |
30 | H. Loyer Danflou, M. Marty, A. Walder, in: S.D. Antolovich, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger, D.L. Klarstrom (Eds.), Superalloys, the Minerals, Metals, and Materials Society, Warrendale, PA, 1992, pp. 63-72. |
31 | G.H. Bishop, W.H. Hartt, G.A. Bruggeman, Grain boundary faceting of (1010) tilt boundaries in zinc, Acta Metall. 19 (1971) 37-46. DOI |
32 | T.E. Hsieh, R.W. Balluffi, Observations of roughening/de-faceting phase transitions in grain boundaries, Acta Metall. Mater. 37 (1989) 2133-2139. DOI |
33 | K.J. Kim, H.U. Hong, S.W. Nam, A study on the mechanism of serrated grain boundary formation in an austenitic stainless steel, Mater. Chem. Phys. 126 (2011) 480-483. DOI |
34 | A.K. Koul, G.H. Gessinger, On the mechanism of serrated grain boundary formation xn ni-based superalloys, Acta Metall. 31 (1983) 1061-1069. DOI |
35 | A. Stratulat, J.A. Duff, T.J. Marrow, Grain boundary structure and intergranular stress corrosion crackinitiation in high temperature water of a thermally sensitized austenitic stainless steel, observed in situ, Corros. Sci. 85 (2014) 428-435. DOI |
36 | J.R. Crum, Effect of composition and heat treatment on stress corrosion cracking of Alloy 600 steam generator tubes in sodium hydroxide, Corrosion 38 (1982) 40-45. DOI |
37 | E. West, G. Was, A model for the normal stress dependence of intergranular cracking of irradiated 316 L stainless steel in supercritical water, J. Nucl. Mater. 408 (2011) 142-152. DOI |
38 | B. Alexandreanu, Grain Boundary Deformation-induced Intergranular Stress Corrosion Cracking of Ni-16Cr-9Fe in 360oC Water, Ph. D. Thesis, University of Michigan, Ann Arbor, MI, 2002. |
39 | R. Bandy, D. van Rooyen, Tests with Inconel 600 to Obtain Quantitative Stress Corrosion Cracking Data for Evaluating Service Performance, BNL-NUREG-31814, U.S. Nuclear Regulatory Commission, Washington, DC, 1983. |
40 | G.P. Airey, The effect of carbon content and thermal treatment on the SCC behavior of Inconel Alloy 600 steam generator tubing, Corrosion 35 (1979) 129-136. DOI |