• Journal of Ginseng Research
• /
• 제41권3호
• /
• pp.339-346
• /
• 2017

Background: In this study, we investigated how to convert the Panax ginseng DNA sequence code and chemical fingerprints into a two-dimensional code. In order to improve the compression efficiency, GATC2Bytes and digital merger compression algorithms are proposed. Methods: HPLC chemical fingerprint data of 10 groups of P. ginseng from Northeast China and the internal transcribed spacer 2 (ITS2) sequence code as the DNA sequence code were ready for conversion. In order to convert such data into a two-dimensional code, the following six steps were performed: First, the chemical fingerprint characteristic data sets were obtained through the inflection filtering algorithm. Second, precompression processing of such data sets is undertaken. Third, precompression processing was undertaken with the P. ginseng DNA (ITS2) sequence codes. Fourth, the precompressed chemical fingerprint data and the DNA (ITS2) sequence code were combined in accordance with the set data format. Such combined data can be compressed by Zlib, an open source data compression algorithm. Finally, the compressed data generated a two-dimensional code called a quick response code (QR code). Results: Through the abovementioned converting process, it can be found that the number of bytes needed for storing P. ginseng chemical fingerprints and its DNA (ITS2) sequence code can be greatly reduced. After GTCA2Bytes algorithm processing, the ITS2 compression rate reaches 75% and the chemical fingerprint compression rate exceeds 99.65% via filtration and digital merger compression algorithm processing. Therefore, the overall compression ratio even exceeds 99.36%. The capacity of the formed QR code is around 0.5k, which can easily and successfully be read and identified by any smartphone. Conclusion: P. ginseng chemical fingerprints and its DNA (ITS2) sequence code can form a QR code after data processing, and therefore the QR code can be a perfect carrier of the authenticity and quality of P. ginseng information. This study provides a theoretical basis for the development of a quality traceability system of traditional Chinese medicine based on a two-dimensional code.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제5권6호
• /
• pp.135-142
• /
• 2016

본 연구에서는 디지털 방식으로 측정된 맥파의 파형으로부터 최대 높이와 최소 높이의 차이, 즉 맥파의 차동값을 이용하여 혈압을 측정하는 측정 기법을 제시한다. 이를 위하여 본 연구에서는 적분 방식의 디지털 압력 센서와 블루투스, 스마트폰으로 구성되는 맥파 측정 시스템을 이용하여 맥파 데이터를 수집하였다. 수집된 맥파 데이터들은 고혈압, 정상, 저혈압의 군으로 분류되고, 각 맥파 파형의 최고 값과 최저 값의 개인별 차동값 평균을 도출한다. 맥파 측정시 동시에 혈압계로 측정한 최고혈압과 최저혈압의 값과 맥파 데이터로부터 도출된 차동값의 평균값들을 회귀 분석하면 맥파 차동값과 혈압과의 상관관계인 혈압상관관계식을 도출할 수 있다. 이 혈압상관관계식을 이용하여 임의의 실험자의 맥파 측정을 통한 혈압 추정 실험을 수행한 결과 실험자들의 혈압값들을 용이하게 추정할 수 있었다. 기존의 혈압계를 사용한 측정치에 대하여 제안된 기법은 최저혈압의 경우는 최대 66 %의 오차를 보이므로 그다지 높은 정확성을 보이지 못하지만, 최고혈압의 경우에는 10 % 이하의 오차로 혈압값을 추정할 수 있었다.

• 한국의류학회지
• /
• 제40권6호
• /
• pp.1116-1133
• /
• 2016

This study examines the historical background of Goryeo and its relationship with Song and Yuan. In addition, it observes the shape of dress styles for the king, queen, officers, maids in waiting, and commoners after classifying them with a focus on the dress style of normal people appearing in Buddhist paintings. This study then investigates structures by tracing Goryeo's unique identity and its characteristic by a comparison and analysis of dressing style elements of Goryeo with Song and Yuan. The results shows that the Song's system was used exclusively for the dress style of the king and government officers of Goryeo after Goryeo's submission period by Yuan. There were no clear appearances of a Mongol style dress but only changes in head styles of cutting hair around the head and twisting the rest in a top down and long method. In addition, Song's style Bokgeon was shown by the king to his lower level officers. This was because the king and his officers of Yuan were in accordance with Song's system in officer's dress, hat and head style, armor, and horseback riding equipment. Second, there is doubt if they inherited a traditional form and style of the dress rather than followed the dress style of Yuan because the shape of Yuan's basic dress style Deel is very similar to the dress shape of early Buyeo people's Po in the $3^{rd}$ to $4^{th}$ centuries. Third, the shape of the Chaksu and Gung-go had been kept as it was in the dress style of ordinary men, and because the shape of the double collar had already appeared in the period of Samguk, which appeared in all classes of Yuan. There is no reason to adopt double collar shape that appeared. The general Pyeonbokpo of the country had to be influenced by Yuan. Forth, the dress style of queen and her maids in waiting were mentioned in documents; however, there was no shape of a dress like Boktag and Deel in the relics, which are the characteristic of Yuan's woman dress style. Fifth, the shape worn national style Yu and Sang had been kept in an ordinary woman's dress style; however, the two style system of high and lower class in Yuan's ordinary woman dress style appeared newly and is considered an influence of Goryeo.

• 대한산업공학회지
• /
• 제41권5호
• /
• pp.461-469
• /
• 2015

The aim of this study is to find out the user's needs of a 3D hand gesture interface in the smart home environment. To find out the users' needs, we investigated which object the users want to use with a 3D hand gesture interface and why they want to use a 3D hand gesture interface. 3D hand gesture interfaces are studied to be applied to various devices in the smart environment. 3D hand gesture interfaces enable the users to control the smart environment with natural and intuitive hand gestures. With these advantages, finding out the user's needs of a 3D hand gesture interface would improve the user experience of a product. This study was conducted using a diary method to find out the user's needs with 20 participants. They wrote the needs of a 3D hand gesture interface during one week filling in the forms of a diary. The form of the diary is comprised of who, when, where, what and how to use a 3D hand gesture interface with each consisting of a usefulness score. A total of 322 data (209 normal data and 113 error data) were collected from users. There were some common objects which the users wanted to control with a 3D hand gesture interface and reasons why they want to use a 3D hand gesture interface. Among them, the users wanted to use a 3D hand gesture interface mostly to control the light, and to use a 3D hand gesture interface mostly to overcome hand restrictions. The results of this study would help develop effective and efficient studies of a 3D hand gesture interface giving valuable insights for the researchers and designers. In addition, this could be used for creating guidelines for 3D hand gesture interfaces.

• 스마트미디어저널
• /
• 제6권1호
• /
• pp.16-21
• /
• 2017

컴퓨터가 상용화되면서 일반인들은 문서를 작성하기 위해 컴퓨터를 이용하는 방법을 자주 사용하게 되었다. 컴퓨터를 이용하여 문서를 작성하는 방법은 작성 속도가 빠르고 손의 피로가 적지만 철자오류가 발생할 확률이 매우 높다. 보통 철자오류는 발견하기 쉽기 때문에 곧바로 수정이 가능하지만, 사용자의 지식 부족 혹은 눈에 잘 띄지 않는 철자오류도 존재하기 때문에 철자오류가 존재하지 않는 문서를 작성하기 어렵다. 온라인상에서는 문서 작성에 대한 규칙 및 예절이 미비하기 때문에 철자오류에 의한 문제가 적지만 중요문서에서 발생하는 철자오류는 신뢰도 하락과 같은 큰 문제를 일으킨다. 철자오류 교정은 전문가 또한 완벽하게 수행하기 힘들기 때문에 비전문가인 일반인들을 위한 교정방법연구가 필요하다. 본 논문에서는 한글 편집거리 알고리즘을 이용해 철자오류를 교정하는 연구를 진행한다. 이전 연구를 통해 검출한 철자오류를 수집한 말뭉치 사전에서 등장하는 단어 중 철자오류 단어와 가장 유사한 단어를 발견하여 주위 단어와의 동시등장빈도를 계산하는 것으로 철자오류 교정을 수행하게 된다.

• 전기학회논문지P
• /
• 제59권4호
• /
• pp.462-466
• /
• 2010

The purpose of this study is to evaluate the safety of a wire connector fabricated for the effective installation of a lighting fixture including its contact resistance, insulation resistance, withstanding voltage characteristics, etc., and to provide the basis for the analysis and judgment of PL(Product Liability) dispute by presenting a damage pattern due to a general flame and overcurrent. This study applied the Korean Standard (KS) for the incombustibility test of the connector using a general flame and performed an overcurrent characteristics test of the connector using PCITS (Primary Current Injection Test System). The contact resistance of the housing connector was measured using a high resistance meter and the insulation resistance was measured using a multimeter. In addition, a supply voltage of AC 1,500V for testing the withstanding voltage characteristics was applied to both ends of the connector. Measurement was performed on 5 specimens and the measured values were used as a basis for judgment. Since the connector is fabricated in the form of a housing, it can be connected and separated easily and has a structure that allows no foreign material to enter. In addition, since it has a structure that allows wires to be connected only when their polarity is identical, any misconnection that may occur during installation can be prevented. When the incombustibility test was performed by applying a general flame to the connector, it showed outstanding incombustibility characteristics and the blade and blade holder connected to the housing remained firmly secured even after the insulation sheath (PVC) was completely destroyed by fire. In addition, the mechanism of the damaged connecting wire showed a comparatively uniform carbonization pattern and it was found that some residual melted insulation material was attached to both ends. In the accelerated life test (ALT) to which approximately 500% of the rated current was applied, the connector damage proceeded in the order of white smoke generation, wire separation, spark occurrence and carbonization. That is, it could be seen that the connector damaged by overcurrent lost its own metallic color with traces of discoloration and carbonization. The contact resistance of the connector at a normal state was 2.164mV/A on average. The contact resistance measured after the high temperature test was 3.258mV/A. In addition, the insulation resistance after the temperature test was completed was greater than $10G\Omega$ and the withstanding voltage test result showed that no insulation breakdown occurred to all specimens showing stable withstanding voltage and insulation resistance characteristics.

• 대한방사선기술학회지:방사선기술과학
• /
• 제36권2호
• /
• pp.131-139
• /
• 2013

복부 전산화단층촬영 후 3차원 볼륨렌더링으로 재구성한 영상을 분석하여 복부대동맥에서 분지하는 복강축과 위창자간막동맥을 기준으로 해부학적 변위를 분류하여 평가하고자 하였다. 복부 전산화단층혈관촬영을 시행한 613명 환자의 3차원 볼륨렌더링 영상을 이용하여 해부학적 변위를 형태별로 분류한 결과 552명(Type I, II)은 정상 구조에 속하였고, 61명(Type III~XII)은 변위로 분류하였다. Type I이 339명 (55.31%), Type II가 213명(34.74%)으로 나타났으며 변위로 분류된 경우는 Type III은 18명(2.93%), Type IV는 12명 (1.95%), Type V는 11명 (1.79%), Type VI는 9명 (1.46%), Type VII는 6명 (0.97%)으로 나타났으며, Type VIII~XII는 각각 1명 (0.16%)으로 전혀 새로운 변위형태로 분류되었다. 결론적으로 복강축과 위창자간막동맥을 기준으로 변위를 분류한 결과 그동안 간동맥 중심의 해부학적 변위 분류에서는 관찰되지 않았던 9가지의 새로운 변위형태를 파악할 수 있었다. 이는 새로운 혈류지도를 만드는 중요한 자료로 이용될 수 있을 것으로 사료된다.

• 한국약용작물학회지
• /
• 제18권3호
• /
• pp.143-150
• /
• 2010

This study showed the increase of antitumor activities of water soluble E. sinica extract by nano-encapsulation process with lecithin. Five groups of lecithin only group (LO), lecithin nano-encapsulated E. sinica group (LE), E. sinica only group (EO), one negative control group (NCO) and positive control group (PCO) were set for several anticancer experiment and fed into Sarcoma-180 injected mice. The cytotoxicity of LE on the human normal kidney cell (HEK293) showed 14.8% lower than 19.2% of EO and 18.4% of LO. Growth of human liver carcinoma cell and human stomach carcinoma cell as representative of digestive system in vitro was inhibited up to about 85.1% and 87.3%, in adding 1.0 mg/$m{\ell}$ of LE, which values 15% higher than that from conventional EO. The survival rates of each mice group were 40%, 63%, 48%, 33% and 100%, respectively after 40 days of injecting Sarcoma-180. The increment of their body weights of the extract feeding groups was suppressed down to 10~15%, compared to the negative control. The nano-particles also reduced the hypertrophy of the internal organs such as spleen and liver down to 15~20%, compared to those as the other groups. Among them, LE effectively reduced the size of tumor form to 20%. From these results, in vitro and in vivo antitumor activities of E. sinica could be enhanced by using nano-encapsulation process with lecithin because of better permeation into the cancer cells by confocal observations.

• Journal of Genetic Medicine
• /
• 제4권1호
• /
• pp.80-83
• /
• 2007

고리염색체(Ring chromosome)는 매우 낮은 빈도로 발견되는 염색체 이상으로 모든 번호에서 보고되고 있으며 특히 끝곁 매듭 염색체(acrocentric chromosome)에서 빈번하게 관찰 된다. 본 증례는 ring chromosome(고리염색체)11의 산전진단에 관한 것이다. 산모는 36세의 여성으로 모체혈청검사에서 에드워드 증후군의 표시인자가 증가되어, 태아의 염색체 검사를 위해 임신 19.5주에 양수천자술을 시행하였다. 결과는 46,XX,r(11)[65]/45,XX,-11[16]/46,XX[34]로 고리염색체(ring chromosome) 11이 mosaic으로 관찰되었다. 혈액을 이용한 부모 염색체 검사는 모두 정상이었다. 임신 20주에 실시된 정밀초음파 검사에서는 자궁내성장장애(IUGR) 소견을 보였다. 모자익시즘의 확인을 위해 임신 22주에 재대 혈액을 이용한 두번째 염색체 검사 결과는 46,XX,r(11)(p15.5q24.2)[229]/45,XX,-11 [15]이었으며 첫번째 검사에서 관찰되지 않았던 다양한 형태의 고리염색체(ring chromosome)가 소수의 세포에서 관찰되었다. 고리염색체(ring chromosome)11에 대한 FISH 검사에서는 11 염색체의 장완과 11 염색체의 단완의 subtelomeric 부위가 결실되어 있었다.

• 정보처리학회논문지A
• /
• 제14A권6호
• /
• pp.371-382
• /
• 2007

현대의 서버 시스템은 대부분의 경우 클러스터 시스템으로 이루어지어 가능한 많은 사용자를 지원할 뿐만 아니라 가능한 많은 어플리케이션을 지원하는 것을 목적으로 하는 서비스 지향 클러스터 시스템이다. 클러스터 시스템 아키텍쳐의 발전으로 자바 프레임웍에 기반한 미들웨어 어프로치가 발전하고 있다. 미들웨어에 의한 방법은 서버 시스템의 성능과 어플리케이션의 활용도를 보장하면서도 서버 시스템 구축을 위한 대부분의 노력을 덜어준다. 본 연구에서는 JMX를 이용하여 클러스터 시스템의 손쉬운 구현과 관리를 달성할 수 있는 새로운 클러스터 시스템을 소개한다. 일단 클러스터 시스템의 구축과 구성단계를 보이며, 어플리케이션과 시스템 양자에 걸쳐서 손쉬운 구축과 확장, 그리고 관리가 미들웨어에 기반한 시스템에서 이루어짐을 보인다. 덧붙여 서비스 지향 클러스터 시스템이 미들웨어에 기반하여 우수한 성능을 보임을 성능 평가 실험 결과를 통하여 검증하였다. 기본적인 성능 평가 결과는 서버의 가용성, 그리고 로드 밸런싱과 스케쥴링 알고리즘의 효율성을 검증하였다. 특히, 우리의 서비스기반 스케줄링 방법이 정상부하시 적재불균형문제와 과부하시의 대처능력에서 타 방법에 비해 우수함을 보였다.