• 대한의용생체공학회:의공학회지
• /
• 제18권3호
• /
• pp.285-290
• /
• 1997

In this paper, the power spectral analysis and the fractal analysis of heart rate variability(HRV) were performed to evaluate the effects of brain lesion on cardiovascular system and autonomic function for 24 normal subjects and 22 hemiplegic patients. The ECG and respiration signals were recorded at tilt angles of $0^{\circ}$ and $70^{\circ}$ for 5 and 6 minutes successively under the condition of frequency controlled respiration (0.25Hz). For normal subjects, HR, LF component, HF component and fractral dimension of HRV were distinctly changed after orthostatic stress, whereas, for hemiplegic patients, those were little changed. Complexity and variability of heart rate of patients were smaller than those of normal subjects. Sympathetic tone of patients was higher than that in normal subjects. All of these results support that autonomic disorder and cardiovascular disturbance accompanied by brain lesion could be assessed by the power spectral analysis and fractal analysis of HRV.

• 센서학회지
• /
• 제31권1호
• /
• pp.51-56
• /
• 2022

In this study an efficient method for detecting and monitoring engine misfiring, focusing on minute speed changes in the crankshaft is proposed., Its validity is verified using various misfiring cases. Typically, the crankshaft speed fluctuates around the normal value depending on the engine misfiring status. Even a minute speed change in the crankshaft can be estimated by measuring the rotation time of each tooth of the 118-tooth flywheel attached to the crankshaft with a 2-MHz timer. Therefore, a speed pattern for an in-line six-cylinder engine consists of 236 tooth rotation speeds corresponding to the two rotations of the crankshaft, in which all the cylinders complete four-stroke cycle. FFT analysis can reduce the number of components of a speed pattern from 236 to just four major components: - fundamental frequency_(f), 2f, 3f, 6f., - This makes the comparison of the misfiring cases simpler and faster. In the experiment, five engine status cases (one normal firing and, four misfiring cases) were simulated. While the 6f component was the largest for the normal case, the f component increased as misfiring occurred one, two apart, and two consecutive times. The 3D FFT pattern comprising the ratio of f, 2f, and 3f, 6f showed that the distance between the misfiring and normal states was larger

• Communications for Statistical Applications and Methods
• /
• 제22권3호
• /
• pp.241-253
• /
• 2015

In this paper we predict the track of typhoons using a Bayesian principal component regression model based on wind field data. Data is obtained at each time point and we applied the Bayesian principal component regression model to conduct the track prediction based on the time point. Based on regression model, we applied to variable selection prior and two kinds of prior distribution; normal and Laplace distribution. We show prediction results based on Bayesian Model Averaging (BMA) estimator and Median Probability Model (MPM) estimator. We analysis 8 typhoons in 2006 using data obtained from previous 6 years (2000-2005). We compare our prediction results with a moving-nest typhoon model (MTM) proposed by the Korea Meteorological Administration. We posit that is possible to predict the track of a typhoon accurately using only a statistical model and without a dynamical model.

• 항공우주시스템공학회지
• /
• 제6권1호
• /
• pp.13-18
• /
• 2012

This paper presents a structural health monitoring method of aircraft reciprocating engine using Principal Component Analysis (PCA) which analyzes vibration expressed by Averaged Normalized Power Spectral Density (ANPSD). Because ANPSD of the rotating shaft is sensitive to the rotating speed, this paper proposes to use a post-processing method of ANPSD is used to reduce the sensitivity. The PCA extracts compressed information from the post-processed ANPSDs and the information means the difference between current and normal cases of the engine. The experimental results demonstrate the feasibility and effectiveness of the proposed method to detect abnormal cases of the engine.

• 화약ㆍ발파
• /
• 제8권4호
• /
• pp.23-29
• /
• 1990

Some surface blasting vibration was measured to determine site constants and vibration frequency was analyzed. The results are summarized as follows; 1) Design method to predict particle velocities was introduced using the logarithmic normal distribution characteristics of peak particle velocities. 2) Scaled distance diagram to determine limiting charge was presented. 3) Line fitness between particle velocity and scaled distance didn't depend on dominant component of vibration. Prevail fitness was in the order of transverese, peak, vertical and radial component. 4) Dominant component of particle velocity didn't related to drilling direction. Frequency was lowered as distance enlarged. Duration time of vibration was shortened as charge decreased.

• 품질경영학회지
• /
• 제22권4호
• /
• pp.79-101
• /
• 1994

In modern manufacturing, a product consists of many components created by different processes. Variations in the individual component dimensions and in the processes may result in unacceptable final assemblies. Thus, engineers have increased pressure to properly set tolerance specifications for individual components and to control manufacturing processes. When a proper variation stack-up analysis is not performed for all of the components in a functional system, all component parts can be within specifications, but the final assembly may not be functional. Thus, in order to improve the performance of the final assembly, a proper variation stack-up analysis is essential for specifying dimensional tolerances and process control. This research provides a detailed case example of the use of variation stack-up analysis using a Monte Carlo simulation method to improve the defect rate of a complex process, which is the commutator brush track undercut process of an armature assembly of a small motor. Variations in individual component dimensions and process mean shifts cause high defect rate, Since some dimensional characteristics have non-normal distributions and the stack-up function is non-linear, the Monte Carlo simulation method is used.

• The Journal of Korean Physical Therapy
• /
• 제14권3호
• /
• pp.308-322
• /
• 2002

The purpose of this study was to investigate the influence of the Cardiopulmonary function and Blood component to aerobic exercise. This were measured performance for 15 minutes. This study included 14 healthy individuals, 7 males and 7 females who were aged from 19 to 25 years. 1. After exercise heart rate was increased by on average of 93.7 beat/min as compared with rest. 2. Before exercise breath rate increased compared with rest and normal recovery need more 10 minutes. 3. Breathing capacity increased compare before with after perfoming exercise and male was less increase than was female. 4. Blood component(WBC, RBC, HB, HCT) showed aslight increased of difference compare before with after perfoming exercise.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1362-1364
• /
• 2003

As non-isothermal mixed pixel is widely existed, the pixel-mean temperature cannot adequately represent the actual thermal state of land surface. The row crop was chosen as target to discuss the problem of component temperature retrieval. At first, the matrix model was found to express the thermal radiant directionality of the target. Then correlation of multi-angle infrared radiance was analyzed. In order to increase the retrieving accuracy, we chose the retrievable parameters and established the iterative method combining with inverse matrix to retrieve component temperature. It was proved by field experiment that the method could improve the retrieving accuracy and stability remarkably.

• Bulletin of the Korean Chemical Society
• /
• 제16권12호
• /
• pp.1184-1189
• /
• 1995

The rapid quenching dynamics of F center excitation by OH- defects in KCl crystals are investigated by monitoring ground state absorption bleach recovery, using a picosecond streak camera absorption spectrometer. F center absorption bleach in OH--doped crystals shows three distinguishable recovery components with the current temporal resolution, designated as slow, medium and fast components. The slow one is due to the normal relaxation process of F* centers as found in OH--free crystals. The others are consequent on energy transfer from electronically excited F centers to OH--vibrational levels. The fast component is a minor energy transfer process and resulting from the relaxation of somewhat distant, not the closest, associated pairs of F* and OH- defects. The energy transfer between widely separated F* and OH- defects opens up a recovery process via the medium component which is assisted by OH- librations, lattice vibrations and OH- dipole reorientations. The quenching behaviors of F* luminescence and photoionization by OH- are explained well by the relaxation process of the medium component.

• Journal of the Korean Wood Science and Technology
• /
• 제22권1호
• /
• pp.72-79
• /
• 1994

To analyze terpene components, the essentail oil were extracted with steam distillation method from normal needle, damaged needle and pinecone of Pinus densiflora. The extracted essential oil was analyzed by gas chromatography and gas chromatography-mass spectroscopy. The results were summarized as follows; 1. Normal needles involve 43 kinds of terpene components, but damaged needles contained only 29 kinds. The most abundant components of normal and damaged needles were respectable ${\alpha}$-pinene and caryophyllene oxide. ${\alpha}$-pinene content in normal meedles amounted to 15.99 percents and caryophyllene oxide in damaged was 8.15 percents. 2. Pinecone showed 23 kinds of terpene components and among them the most abundant component was ${\beta}$-phellandrene, of which content showed 19.31 percents. 3. In normal needles, excluding ${\alpha}$-pinene, the contents of 8 kinds of other monoterpenes, reached to 48 percents of the total terpenes, 4. In damaged needles, excluding ${\alpha}$-pinene, the contents of 4 kinds of other monoterpenes, reached to 11 percents of the total terpenes. 5. In pinecone, excluding camphene, the contents of 6 kinds of other monoterpenes, reached to 58 percents of the total terpenes.