• 한국식품영양과학회지
• /
• 제28권2호
• /
• pp.299-304
• /
• 1999

To compare the composition of volatile flavor components of two different types of rice, the volatile flavor concentrates isolated from brown rices Hyangnambyeo(aromatic cultivar) and Dongjinbyeo (normal cultivar) were analyzed by gas chromatography and gas chromatography mass spectrometry. A total of components, including 16 hydrocarbons, 16 aldehydes and ketones, 15 alcohols, 4 acids, and 10 miscellaneous components were identified positively or tentat ively. Among them, n pentanol was the most abundant component in both samples and Hyangnambyeo contained more aldehydes and alcohols than Dongjinbyeo. 2 Acetyl 1 pyrroline which is chiefly responsible for the character istic odor of aromatic type rice was high in Hyangnambyeo compare to Dongjinbyeo, but these were detected as minor component.

• 전기학회논문지
• /
• 제60권4호
• /
• pp.739-745
• /
• 2011

This paper proposes a method for reducing the negative spatial harmonics of the radial flux density of an interior-type permanent magnet (IPM) motor. The reliability of the motor is increased by minimizing its vibrations under dynamic eccentricity (DE) state and normal state due to reduction of a negative spatial harmonics component through the influx of a zero spatial harmonics component in the radial flux density. To minimize the vibrations, optimal notches corresponding to the distribution shape of the magnetic field are designed on the rotor pole face. The variations of vibration computation by finite element method (FEM) and the validity of the analysis and rotor shape design are confirmed by vibration and performance experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.131-133
• /
• 1995

Inductive high-Tc superconducting fault current limiter using YBCO superconducting ring in the secondary part has many advantages in power networks. It is based on the superconducting to normal transition and this paper describes its operational characteristics and experimental results, especially focused on the harmonic component analysis and recovery time. We fabricated and tested it under various conditions for the analysis of transient fault characteristics. And for the analysis of harmonics we used FFT methods. The superconducting ring was quenched in 240Arms and fault current was effectively limited to the lower current level. In addition, it was fast recovered when the fault condition was removed and after fault the system had odd harmonics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1370-1375
• /
• 2001

Substructure coupling or component mode synthesis may be employed in the solution of dynamic problems for structure. The model is partitioned into several subdomains. and a generalized Craig-Bampton representation is derived. In this paper the mode sets(normal modes. constraint modes) have been employed for model reduction. A generalized model reduction procedure has been described. Those reduction methods which adapt constraint modes have been described in detail. As examples. a flexible structure and a 10 DOF damped system are analyzed. Comparison with a conventional reduction method based on a complete model has been made via eigenpairs and dynamic responses.

• 한국약용작물학회지
• /
• 제21권4호
• /
• pp.289-295
• /
• 2013

This study was carried out to investigate the cause of leaf discoloration occurring frequently in paddy cultivation. Chemical property of soil and inorganic nutrient component of leaf were analyzed on abnormal fields of 7 regions where leaf discoloration occurred severely and normal fields of 7 regions among ginseng garden. The pH of abnormal fields was strong acidic condition (pH 5.51) compare to normal fields of slightly acid condition (pH 6.42). Calcium and magnesium content in abnormal fields were lower distinctly than that of normal fields, while EC, organic matter, phosphate, and potassium content showed not distinct difference between abnormal and normal fields. Whereas calcium and magnesium content were distinctly high in normal fields, both of potassium and iron content of ginseng leaf were distinctly high in abnormal fields. In particular, iron content of abnormal fields was more 1.94 times in soil, and 3.03 times in leaf than that of normal fields. In soil chemical property, there were significant negative correlation between leaf discoloration ratio and soil pH, and there were also significant positive correlation between leaf discoloration ratio and iron content. In ginseng leaf, there were highly significant negative correlation between leaf discoloration ratio and calcium content, and there were also highly significant positive correlation between leaf discoloration ratio and iron content.

• 한국해양학회지
• /
• 제28권2호
• /
• pp.114-120
• /
• 1993

입도분포의 특징분석에 종래의 조직특성치 대신 수치해석적인 분해법의 적용을 시 도하였다. 그 결과 이 방법이 제주해협의 대륙붕 표층퇴적물과 같은 복모드형 입 도분포의 분석에 매우 유용함이 입증 되었다. 복모드형 입도분포 퇴적물은 제주해협 대륙붕에서는 86%의 높은 비율을 점한다. 종래의 입도특성치(평균, 표준편차, 왜도, 첨도)는 복모드형 입도분포에 대해서는 왜곡된 값을 보인다. 따라서 입도분포의 모드 에 대체로 대응되는 정규성분으로 분해해서 각 정규성분의 특성치를 해석함으로써 입 도특성치에서와 같은 특징의 누락이나 왜곡을 피할 수 있다. 제주해협 대륙붕의 167개 퇴적물 입도분포곡선을 비선형 최소자승법을 사용하여 정규성분으로 분해해서 총 387 개의 정규성분을 얻었다. 정규성분의 평균은 1-3 phi 8-9 phi에 집중되는 것이 많다. 이중 조립질 정규성분의 평균치는 복잡하고 특징적인 지리적 분포를 보인다. 이러한 분포는 퇴적물 총층후 분포와 매우 유사하며 해저면의 지질과 지형을 면밀하게 반영하 고 있다. 해저면을 형성하는 퇴적층은 플라이스토세 후기의 해침성 모래층이며 해저지 형은 플라이스토세말 빙하기 저해수면시기의 침식에 의해 형성된 것으로 보인다.

• 한국작물학회지
• /
• 제40권3호
• /
• pp.359-364
• /
• 1995

논담배 품질저하 요인으로 알려져 있는 grey엽발생원인 구명의 기초자료로 이용하기 위하여 논토양에서 자연발생된 grey엽을 채취, 피해정도별로 색채와 화학성분적 특성을 조사 분석한 결과는 다음과 같다. 1. Grey엽의 발생엽수와 발생율은 하위엽에서 가장 많았고 중 > 본 > 상엽 순이었으며 엽중성분함량은 정상엽에 비하여 Fe, Mn, Cl함량이 놓았고 피해증상이 심할수록 높았다. 2. 동일엽내에서 grey피해부위가 정상부위에 비하여 Fe, Mn, Cl함량이 높고 전질소, 에테르추출물은 낮았으며, 니코틴, 전당, Ca함량에서는 차이가 없었다. 3. Grey엽의 내용성분간에는 전질소와 Cl, Fe와 Mn간에 정상관이, 전질소와 전당 및 Mn, Cl과 전당간에는 각각 부의 상관관계가 있었다. 4. 색상은 정상엽에 비하여 증상이 심할수록 L치가 크게 감소하고 b치, a치 순으로 감소하였으며, L치와 a치는 일정한 경향이 없었으나 b치는 현저히 낮아 grey엽의 특성으로 나타났다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.95-98
• /
• 2008

In the present work, cross-roil rolling was rallied out using a rolling mill in which the roll axes are tilted by $5^{\circ},\;7.5^{\circ},\;10^{\circ}$ towards the transverse direction of the roiled sample. The evolution of strain states during cross-roll rolling was investigated by three-dimensional finite element method (FEM) simulation. Parallel to cross-roll rolling, normal-rolling using a conventional rolling mill was also carried out in the same rolling condition for clarifying the effect of cross-roll rolling. It turned out that three shear rate components were all introduced to the rolled sample by the cross-roll rolling process, while only one shear rate component operated during normal-rolling.

• International Journal of Korean Welding Society
• /
• 제4권1호
• /
• pp.46-52
• /
• 2004

To combine the mechanical advantages of ceramics with those of metals, one often uses both materials within one composite component. But, as known, they have different material properties and fracture behaviors. In this study, a four-point bending test is carried out on $Si_3N_4$ joined to ANSI 304L stainless steel with a Ti-Ag-Cu filler and a Cu interlayer at room temperature to evaluate their longitudinal strain behaviors. And, to detect localized strain, a couple of strain gages are pasted near the joint interfaces of the ceramic and metal sides. The normal strain rates are varied from $3.33{\times}10^5$ to $3.33{\times}10^{-1}s^{-1}$ Within this range, the experimental results showed that the four-point bending strength and the deflection of the interlayer increased with increasing the strain rate.

• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.3039-3042
• /
• 2012

Pressure tensors at the planar surface of liquid-vapor argon are evaluated from the virial theorem, Irving-Kirkwood, and Harasima versions using a test-area molecular dynamics simulation method through a Lennard-Jones intermolecular potential at two temperatures. We found that the normal and transverse components of the pressure tensor, $p_N(z)$ and $p_T(z)$, obtained from the virial theorem and Harasima version are essentially the same. The normal component of the pressure tensor from Irving-Kirkwood version, $p_N^{IK}(z)$, is shown to be a nearly constant at the lower temperature, independent of z, as agreed in a previous study, but not for $p_N^H$(z), while the transverse components, $p_T^{IK}(z)$ and $p_T^H(z)$, are almost the same. The values of surface tension for both versions computed from $p_N(z)-p_T(z)$ are also the same and are fully consistent with the experimental data.