• 소음진동
• /
• 제7권6호
• /
• pp.975-984
• /
• 1997

A direct boundary element method (DBEM) is developed for thin bodies whose surfaces are rigid or compliant. The Helmholtz integral equation and its normal derivative integral equation are adoped simultaneously to calculate the pressure on both sides of the thin body, instead of the jump values across it, to account for the different surface conditions of each side. Unlike the usual assumption, the normal velocity is assumed to be discontinuous across the thin body. In this approach, only the neutral surface of the thin body has to be discretized. The method is validated by comparison with analytic and/or numerical results for acoustic scattering and radiation from several surface conditions of the thin body; the surfaces are rigid when stationary or vibrating, and part of the interior surface is lined with a sound-absoring material.

• Journal of applied mathematics & informatics
• /
• 제5권1호
• /
• pp.23-40
• /
• 1998

Mixed finite element method is developed to approxi-mate the solution of the initial-boundary value problem for a strongly nonlinear second-order hyperbolic equation in divergence form. Exis-tence and uniqueness of the approximation are proved and optimal-order $L\infty$-in-time $L^2$-in-space a priori error estimates are derived for both the scalar and vector functions approximated by the method.

• 한국항해항만학회지
• /
• 제38권2호
• /
• pp.89-96
• /
• 2014

This paper presents an improvement for calculating method of astronomical ship position based on circle of equal altitude equation. In addition, to enhance the accuracy of ship position achieved from solving equation system, the authors used singular value decomposition (SVD) in least square method instead of normal decomposition. In maths, the SVD was proved more numerically stable than normal decomposition. Therefore, the solution of equation system will be more efficient and the result would be more accurate than previous methods. By proposal algorithm, a computer program have been developed to help the navigators in calculating directly ship position when the modern equipment has failure. Finally, some of experiments are carried out to verify effectiveness of proposed algorithm, the results show that the accuracy of ship position based on new method is better than the intercept method.

• 대한수학회지
• /
• 제57권1호
• /
• pp.61-88
• /
• 2020

In this paper, we investigate the existence of mild solutions for a class of fractional impulsive evolution equation with periodic boundary condition by means of the method of upper and lower solutions and monotone iterative method. Using the theory of Kuratowski measure of noncompactness, a series of results about mild solutions are obtained. Finally, two examples are given to illustrate our results.

• Journal of applied mathematics & informatics
• /
• 제15권1_2호
• /
• pp.29-51
• /
• 2004

In this paper, we propose a new mixed finite element method, called the characteristics-mixed method, for approximating the solution to Burgers' equation. This method is based upon a space-time variational form of Burgers' equation. The hyperbolic part of the equation is approximated along the characteristics in time and the diffusion part is approximated by a mixed finite element method of lowest order. The scheme is locally conservative since fluid is transported along the approximate characteristics on the discrete level and the test function can be piecewise constant. Our analysis show the new method approximate the scalar unknown and the vector flux optimally and simultaneously. We also show this scheme has much smaller time-truncation errors than those of standard methods. Numerical example is presented to show that the new scheme is easily implemented, shocks and boundary layers are handled with almost no oscillations. One of the contributions of the paper is to show how the optimal error estimates in $L^2(\Omega)$ are obtained which are much more difficult than in the standard finite element methods. These results seem to be new in the literature of finite element methods.

• 산업경영시스템학회지
• /
• 제22권52호
• /
• pp.347-354
• /
• 1999

Statistical Process Control(SPC) which uses control charts is widely used to inspect and improve manufacturing process as a effective method. A parametric method is the most common in statistical process control. Shewhart chart was made under the assumption that measurements are independent and normal distribution. In practice, this assumption is often excluded, for example, in case of (equation omitted) chart, when the subgroup sample is small or correlation, it happens that measured data have bias or rejection of the normality test. A bootstrap method can be used in such a situation, which is calculated by resampling procedure without pre-distribution assumption. In this study, applying bootstrap percentile method to (equation omitted) chart, it is compared and evaluated standard process control limit with bootstrap percentile control limit. Also, under the normal and non-normal distributions, where parameter is 0.5, using computer simulation, it is compared standard parametric with bootstrap method which is used to decide process control limits in process quality.

• Kyungpook Mathematical Journal
• /
• 제49권1호
• /
• pp.81-93
• /
• 2009

Bifurcation method of dynamical systems is employed to investigate exact solitary wave solutions and kink wave solutions in the generalized modified Boussinesq equation. Under some parameter conditions, their explicit expressions are obtained. Some previous results are extended.

• Journal of applied mathematics & informatics
• /
• 제29권5_6호
• /
• pp.1463-1475
• /
• 2011

This paper proposes a new generalized iterative method (SSOR-like method) for solving augmented system. A functional equation relating two involved parameters is obtained, and some convergence conditions for this method are derived. This paper generalizes some foregone results. Numerical examples show that, this method is efficient by suitable choices of the involved parameters.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.227-232
• /
• 1996

The one-third calibrating relation by steady solution can cause large error when applied to an unsteady flow with large amplitude waves. Extended calibrating method, which can treat the normal convective contribution, is developed. The normal mass convective term is included into the 2-D mass transport equation by means of rms value and random function. The unknown shear rate is numerically determined by solving the 2-D mass transport equation inversely. This recovery method which predicts the unknown shear rate is constructed. It is found that it works very well without distortion. The inclusion of the normal convective term has a negligible effect on the mass transfer coefficient.

• 소음진동
• /
• 제8권2호
• /
• pp.267-273
• /
• 1998

This study aims at performing sensitivity analysis of piezoelectric smart structure for minimizing radiated noise from the structure, The structure consists of a flat plate on which disk shaped piezoelectric actuator is mounted, and finite element modeling is used for the structure. The finite element modeling uses a combination of three dimensional piezoelectric, flat shell and transition elements so thus it can take into account the coupling effects of the piezoelectric device precisely and it can also reduce the degrees of freedom of the finite element model. Electric potential on the piezoelectric actuator is taken as a design variable and total radiated power of the structure is chosen as an objective function. The objective function can be represented as Rayleigh's integral equation and is a function of normal displacements of the structure. For the convenience of computation, all degrees of freedom of the finite element equation is condensed out except the normal displacements of the structure. To perform the design sensitivity analysis, the derivative of the objective function with respect to the normal displacements is found, and the derivative of the norma displacements with respect to the design variable is calculated from the finite element equation by using so called the adjoint variable method. The analysis results are compared with those of the finite difference method, and shows a good agreement. This sensitivity analysis is faster and more accurate than the finite difference method. Once the sensitivity analysis program is used for gradient-based optimizations, one could achieve a better convergence rate than non-derivative methods for optimal design of piezoelectric smart structures.