• 산업공학
• /
• 제22권3호
• /
• pp.214-222
• /
• 2009

In the early design stage, system reliability must be estimated from life testing data at the component level. Previously, a point estimate of system reliability was obtained from the unbiased estimate of the component reliability after assuming that the number of failed components for a given time followed a binomial distribution. For deriving the confidence interval of system reliability, either the lognormal distribution or the normal approximation of the binomial distribution was assumed for the estimator of system reliability. In this paper, a new estimator is used for the component level reliability, which is biased but has a smaller mean square error than the previous one. We propose to use the beta distribution rather than the lognormal or approximated normal distribution for developing the confidence interval of the system reliability. A numerical example based on Monte Carlo simulation illustrates advantages of the proposed approach over the previous approach.

• 대한기계학회논문집B
• /
• 제33권2호
• /
• pp.124-132
• /
• 2009

Experiments have been performed to investigate fluid-elastic instability of tube bundles, subjected to twophase cross flow. Fluid-elastic is the most important vibration excitation mechanism for heat exchanger tube bundles subjected to the cross flow. The test section consists of cantilevered flexible cylinder(s) and rigid cylinders of normal square array. From a practical design point of view, fluid-elastic instability may be expressed simply in terms of dimensionless flow velocity and dimensionless mass-damping parameter. For dynamic instability of cylinder rows, added mass, damping and the threshold flow velocity are evaluated. The Fluid-elastic instability coefficient is calculated and then compared to existing results given for tube bundles in normal square array.

• Journal of the Korean Statistical Society
• /
• 제32권3호
• /
• pp.235-244
• /
• 2003

In unreplicated factorial or fractional factorial experiments, the presence of one or more outliers can seriously affect the analysis of variance. Using the normal plot of t residuals to identify outliers in factorial or fractional factorial is an easy method to find these dubious points. In some cases, the t residuals form the identical pairs. One can not tell from the plot which is doubtful. This phenomenon occurs for all minimal designs of resolution IV, which fits the model containing all main effects and some two-factor interactions, whether it is orthogonal or not. In these kinds of models, when we drop one point or two points (not foldover pair) from the fraction, the phenomenon of identical pairs of t residuals may still occur. In this paper, the theoretical background of the phenomenon and its sequences will be investigated in detail.

• 한국실내디자인학회논문집
• /
• 제33호
• /
• pp.68-74
• /
• 2002

We human beings can only retain our normal consciousness and the power of thinking through the continuous transition of environment.. Lighting have been progressed inaccordance with these requirements and the demanding functions of our life style which played the important roll of bringing the stimulation we need with the new methods of performances, The advanced technology of today introduces the new method of combining the light, art and the Hi-technology into our artistic world bringing the new stimulation we have not experienced before. It is becoming the point of issue how to use these newly developed techniques and utilize, especially to those who are involved in the illumination environment and the world of Interior Design.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.1118-1124
• /
• 2023

Experimental study on the fluidelastic instability (FEI) of a curved tube bundle in single phase downward cross flow is investigated for the design qualification and analysis input preparation of helical coiled steam generator tubing. A 6×9 normal square curved tube array with equal and different vertical/horizontal pitch-to-diameter ratio was under-tested up to 6 m/s in term of gap flow velocity to measure the critical velocity for FEI. The critical velocity for FEI was measured at the turning point from the vibration amplitude plot along the gap flow velocity. Our test results were compared with straight tube results and published data in the design guideline. The applicability of the current design guidelines to a curved tube bundle is also assessed. We found that introducing frequency difference in a curved tube array increases the critical velocity for fluidelastic instability.

• 대한기계학회논문집A
• /
• 제34권11호
• /
• pp.1691-1696
• /
• 2010

설계단계에서 시스템의 불확실성을 반영하려는 노력이 다양하게 이루어지고 있으며, 강건 최적설계 혹은 신뢰도 기반 최적설계는 이에 대한 대표적인 설계 방법론이다. 이러한 최적화 수식에는 성능함수의 평균, 표준편차와 확률제한조건이 목적함수와 제한조건으로 주로 활용된다. 그러므로, 이러한 통계적 특성치를 효과적으로 계산하는 것은 필수적이며, 더 나아가 최적화 과정에서 비선형 계획법이 일반적으로 활용되므로 민감도가 반드시 필요하다. 본 연구에서는 통계적 모멘트와 확률제한조건에 대해 적분 형태로 정의되는 민감도 수식을 비정규 분포로 확장하고자 한다. 얻어진 민감도 해석 결과는 통계적 모멘트와 손상확률이 설계점에서 계산된 경우, 민감도를 얻기 위해 추가로 성능함수를 계산할 필요가 없음을 보여주므로 효율성 측면에서 우수하다. 그러나, 민감도 수식이 성능함수와 확률밀도함수의 미분과정에서 얻어지는 함수의 곱으로 정의되므로, 동일한 수치적분 방법이 적용되는 경우 민감도 해석 결과는 통계적 모멘트 결과의 정확도에 미치지 못할 가능성이 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.2025-2027
• /
• 2004

The grounding system design of the communication base station can be on the unfavorable conditions to induce the safe designing because of the limited area of the communication base station and the week point of surge caused by the given geographical condition such as the top point of mountain. In this paper, it is examined throughly about the way of safe designing that can reduce GPR(Ground Potential Rise) within the normal frequency band. And it is also considered the effective counter plan to cope with a transient phenomena that happen when surge of scores MHz-band inserted.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1397-1409
• /
• 2018

Stiffened plates with high slenderness parameters show large out-of-plane deflections, due to elastic buckling, which may occur before the plates reach their ultimate strength. From a serviceability point of view, restriction of out-of-plane deflections exceeding the fabrication tolerance is of primary importance. Compressive strength at the serviceability limit state (SLS) for slender stiffened plates under uniaxial stress was investigated through nonlinear elasto-plastic finite element analysis, considering both geometric and material nonlinearity. Both normal and high-performance steel were considered in the study. The SLS was defined based on a deflection limit and an elastic buckling strength. Probabilistic distributions of the SLS strengths were obtained through Monte Carlo simulations, in association with the response surface method. On the basis of the obtained statistical distributions, partial safety factors were proposed for SLS. Comparisons with the ultimate strength of different design codes e.g. Japanese Code, AASHTO, and Canadian Code indicate that AASHTO and Canadian Code provide significantly conservative design, while Japanese Code matches well with a 5% non-exceedance probability for compressive strength at SLS.

• 한국CDE학회논문집
• /
• 제10권2호
• /
• pp.114-120
• /
• 2005

This paper presents a novel method for radius measurement of fillet regions of polygonal models by using optimum onhogonal planes. The objective function for finding an optimum onhogonal plane is designed based on the orthogonality between the normal vectors of the faces in a filet region and the plane that is to be found. Direct search methods are employed to solve the defined optimization problem since no explicit derivatives of the object function can be calculated. Once an optimum orthogonal plane is obtained, the intersection between the onhogonal plane and the faces of interest is calculated, and necessary point data in the fillet region for measuring radii are extracted by some manipulation. Then, the radius of the fillet region in question is measured by least squares fitting of a circle to the extracted point data. The proposed radius measuring method could eliminate the burden of defining a plane for radius measurement, and automatically find a necessary optimum orthogonal plane. It has an advantage in that it can measure fillet radii without prior complicated segmentation of fillet regions and explicit information of neighboring surfaces. The proposed method is demonstrated trough some mea-surement examples.

• 한국전자파학회논문지
• /
• 제15권2호
• /
• pp.194-198
• /
• 2004

본 논문에서는 유전자 알고리즘을 이용하여 접지면에 4개의 U 슬롯을 가지는 광대역 소형 마이크로스트립 안테나를 설계하는 방안을 제시하였다. 안테나의 해석을 위해 적합도 함수로서 FDTD 기법을 사용하였고, 정방형 패치의 길이, 접지면 슬롯의 길이, 중심선으로부터 급전점까지의 거리가 최대의 대역폭과 최소의 크기를 가지기 위한 최적화 파라미터로 사용되었다. 실제 안테나를 제작하여 측정한 결과, 2.445 GHz에서 10 dB 대역폭이 15.63 %이고, 최대 이득이 3.61 dBi이며, 일반 마이크로스트립 안테나에 비해 크기는 54.8 % 감소하였다.