• 대한화학회지
• /
• 제29권2호
• /
• pp.144-150
• /
• 1985

스티렌과 디비닐벤젠을 이용한 공중합체의 합성에 희석제로서 헵탄과 톨루엔을 사용하여 다공성 및 미세구조에 미치는 영향을 조사하였다. 스티렌디비닐벤젠 공중합체를 아미노화하여 음이온 교환수지를 합성하였으며 이 수지의 이온교환용량과 알코올 수용액에서 붕산에 대한 분포계수 값을 구하였고 이온교환 크로마토그래피와 질량분석기를 이용하여 붕소의 동위원소 분리효과를 연구하였다.

• Bulletin of the Korean Chemical Society
• /
• 제35권12호
• /
• pp.3465-3474
• /
• 2014

Porous silica particles are the most prevailing raw material for stationary phases of liquid chromatography. During a long period of time, various methodologies for production of porous silica particles have been proposed, such as crashing and sieving of xerogel, traditional dry or wet process preparation of conventional spherical particles, preparation of hierarchical mesoporous particles by template-mediated pore formation, repeated formation of a thin layer of porous silica upon nonporous silica core (core-shell particles), and formation of specific silica monolith followed by grinding and calcination. Recent developments and applications of useful porous silica particles will be covered in this review. Discussion on sub-$3{\mu}m$ silica particles including nonporous silica particles, carbon or metal oxide clad silica particles, and molecularly imprinted silica particles, will also be included. Next, the individual preparation methods and their feasibilities will be collectively and critically compared and evaluated, being followed by conclusive remarks and future perspectives.

• Korean Chemical Engineering Research
• /
• 제50권6호
• /
• pp.952-959
• /
• 2012

환형 광촉매반응기 외경지지체의 반사막에 의한 광촉매반응기시스템의 광도를 제고함으로써 개선된 광촉매반응기에 의한 악취성분 및 휘발성 유기화합물을 동시 포함한 폐가스의 처리를 수행하였다. 그리고 광도 제고가 각 운전조건에서의 폐가스처리효율에 미치는 영향을 조사하였다. 광촉매 코팅된 nonporous glass bead 담체와 porous silica-based 담체를 각각 광촉매반응기에 충전하였을 때에 반사필름이 부착된 개선된 광촉매반응기 외경에서 측정한 광도는, 반사필름이 부착되지 않아서 광도가 제고되지 않은 광촉매반응기보다 각각 30.1%와 28.5% 증가하였다. Porous silica-based 담체를 충전한 개선된 광촉매반응기의 제거효율에 대한 제고효과는 약 2~3%이었다. 그러나 glass-bead 담체를 충전했을 때에 개선된 광촉매반응기의 제거효율 제고효과는 미미하였다. Porous silica-based 담체가 충전된 개선된 광촉매반응기인 최적화 광촉매반응기의 경우의 황화수소 및 톨루엔 제거효율은 nonporous glass bead가 충전되고 반사막이 없는 광촉매반응기 경우의 제거효율인 각각 19%와 53%보다 각각 약 26%와 약 60%의 증가율을 보였다. 반사막 필름표면의 roughness가 종래의 상업용 거울의 roughness보다 4배 정도 컸으나, 향후 개선된 광촉매반응기의 반사막의 roughness를 개선할 경우에 광도 개선효과가 더욱 커져서 이에 따른 악취 및 VOC를 함유한 광촉매 처리효율이 더욱 제고되리라 예상된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제14권3호
• /
• pp.195-200
• /
• 1992

This is a case report of correction of traumatic right frontal bone depression. Traditionally, autogenous and homogenous corticocancellous bone have been inlaid or onlaid. This patient who had frontal bone depression of right forehead was operated with an extracranial augmentation procedure using Hydroxyapatite materials. The postoperative course was unremarkble and the patient was satisfied with a good facial contour. Now We will report the results.

• Korean Chemical Engineering Research
• /
• 제50권6호
• /
• pp.945-951
• /
• 2012

광촉매반응기의 충전제로서 glass bead-광촉매담체를 control로 하고 다공성의 silica-based 광촉매담체를 사용하였을 때의 악취 및 VOC를 함유한 폐가스의 광촉매 처리효율에 대한 광촉매담체 다공성의 영향평가를 수행하였다. 다공성의 silica-based-광촉매담체의 광촉매 코팅량은 $1,716.3{\mu}g/cm^2$로서 nonporous glass bead(control)에 담지된 광촉매코팅량인 $670{\mu}g/cm^2$ 값의 약 250%이었다. Porous silica-based 담체가 충전된 광촉매반응기의 황화수소 및 톨루엔 제거효율은 각각 22% 및 82%로서, glass-bead 담체가 충전된 UV/광촉매반응기의 경우의 황화수소 및 톨루엔 제거효율인 각각 19% 및 53%와 비교하였을 때에 황화수소의 경우는 약 16% 증가하였고 톨루엔의 경우는 약 55% 증가하였다. 따라서 다공성의 silica-based 광촉매담체를 사용함으로써 황화수소와 톨루엔의 동시처리효율을 각각 제고하였고, 처리효율의 제고율은 황화수소보다 톨루엔의 경우가 3.4배 높았다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1993년도 제1회 하계분리막 Workshop
• /
• pp.1-29
• /
• 1993

막 분리는 막의 물리화학적 특성, 분리대상 물질의 물리화학적 특성, 그리고 물질의 이동현상을 조절하는 압력차, 농도차 및 전위차 등의 추진력, 이 세가지 요소의 조합에 의해 행해진다. 막은 막을 구성하고 있는 물질의 물성, 구조, 막의 응용분야 및 역할 등에 의하여 세공막(Macroporous membranes), 미세공막(Microporous membranes), 비공성막(Nonporous membranes)등으로 분류된다.

• Agricultural and Biosystems Engineering
• /
• 제1권2호
• /
• pp.73-80
• /
• 2000

Aerodynamics in a naturally ventilated multi-span greenhouse with plants was analyzed numerically by the computational fluid dynamics (CFD) simulation. To investigate the potential application of CFD techniques to greenhouse design and analysis, the numerical results of the CFD model were compared with the results of a steady-state mass and energy balance numerical model. Assuming the results of the mass and energy balance model as the standard, reasonably good agreement was obtained between the natural ventilation rates computed by the CFD numerical model and the mass and energy balance model. The steady-state CFD model during a sunny day showed negative errors as high as 15% in the morning and comparable positive errors in the afternoon. Such errors assumed to be due to heat storage in the floor, benches, and greenhouse structure. For a west wind of 2.5 m s$^{-1}$ , the internal nonporous shading screens that opened to the east were predicted to have a 15.6% better air exchange rate than opened to the west. It was generally predicted that the presence of nonporous internal shading screens significantly reduced natural ventilation if the horizontal opening of the screen for each span was smaller that the effective roof vent opening.

• 한국분말재료학회지
• /
• 제22권1호
• /
• pp.15-20
• /
• 2015

The composite of porous silicon (Si) and amorphous carbon (C) is prepared by pyrolysis of a nano-porous Si + pitch mixture. The nano-porous Si is prepared by mechanical milling of magnesium powder with silicon monoxide (SiO) followed by removal of MgO with hydrochloric acid (etching process). The Brunauer-Emmett-Teller (BET) surface area of porous Si ($64.52m^2g^{-1}$) is much higher than that before etching Si/MgO ($4.28m^2g^{-1}$) which indicates pores are formed in Si after the etching process. Cycling stability is examined for the nano-porous Si + C composite and the result is compared with the composite of nonporous Si + C. The capacity retention of the former composite is 59.6% after 50 charge/discharge cycles while the latter shows only 28.0%. The pores of Si formed after the etching process is believed to accommodate large volumetric change of Si during charging and discharging process.

• Environmental Analysis Health and Toxicology
• /
• 제16권4호
• /
• pp.171-179
• /
• 2001

A new passive sampler was developed, improving SPMD (Semipermeable Membrane Devices) that contained triolein in nonporous, low-density polyethylene layflat tubing. Experiments to measure PAHs concentration were carried out at four sites (Dukpo, Sochi, Sohwonggando, Yeonmok) on the southern coast of Korea that were contaminated by oil spills. Passive samplers were deployed at 4 and 8 week intervals at each site. Results showed that bioconcentration levels of PAHs were increased in proportion to exposure duration from all sample sites and accumulation in the passive sampler was much higher than in biota at the Dukpo site. Results of these tests suggest that new passive sampler is a useful tool for measuring bioconcentration organic compounds in aquatic environments.

• Bulletin of the Korean Chemical Society
• /
• 제32권9호
• /
• pp.3274-3280
• /
• 2011

Monodispersed porous NiO and $Co_3O_4$ microcapsules with a hollow core were synthesized using SBA-16 silica sol and PS as a hard template. The porous hollow microcapsules were characterized by XRD, TEM and $N_2$ adsorption/desorption analysis. After $H_2$ reduction of metal oxide microspheres, they were conducted as an active catalyst in the reduction of chiral butylronitrile and cyanobenzene. The mesoporous metals having a hollow structure showed a higher activity than a nonporous metal powder and an impregnated metal on the carbon support.