• Clean Technology
• /
• v.12 no.1
• /
• pp.45-51
• /
• 2006

Colloidal Liquid Aphrons(CLAs) were prepared from different solvents such as nonpolar hydrocarbons, alcohols, and amines. Water-soluble surfactant and oil-soluble surfactant were used in this study. The effect of PVR (phase volume ratio) and concentration of extractant on the stability of CLA was investigated. The stability of CLA was affected by PVR. As PVR was increased, the stability of CLA was decreased.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.601-607
• /
• 2012

An aspect of organophilic modification for the delamination is described for the layered rare-earth hydroxides in this paper. The interlayer property of $RE_2(OH)_5NO_3{\cdot}nH_2O$, where RE=Eu (LEuH) and Tb (LTbH), was modified by the exchange reaction of nitrate ion with oleate anion that is one of the representative dispersion agents in nonpolar solvents. The bilayer arrangement of long oleate anions in the gallery of $RE_2(OH)_5NO_3{\cdot}nH_2O$ could effectively weaken the stacking of the hydroxide layers. Highly organophilic environment of the interlayer space promoted the introduction of toluene to delaminate the layered structure into their individual sheets. When irradiated with 365 nm UV, the resulting transparent colloidal solutions of toluene containing LEuH and LTbH nanosheets yielded typical red and green emissions, respectively, which are visible to the naked eye.

• Journal of the Korean Chemical Society
• /
• v.42 no.1
• /
• pp.22-27
• /
• 1998

Fluorescence quenching of coumarin 153 and coumarin 481 with N,N-dimethylaniline in various solvents was investigated. Quenching rate constants are related to diffusion-limited rate constants to some extent. It is noted that smaller discrepancy was observed between the diffusion-limited rate constant and the experimental quenching rate constant when the stick boundary condition rather than the slip boundary condition was applied for estimating the diffusion coefficients. In nonpolar solvent like cyclohexane fluorescence quenching is adequately explained by the diffusion controlled process within the experimental error, but in acetonitrile the quenching rate constant was estimated to be consistently smaller than the diffusion limited rate constant. This may suggest that fluorescence quenching of coumarin dyes be affected not only by the molecular diffusion but also by the intramoleccular process such as charge separation.

• Korean Journal of Pharmacognosy
• /
• v.49 no.3
• /
• pp.278-284
• /
• 2018

Asimina triloba contains many kinds of annonaceous acetogenins known to have toxicity and/or activity. In this study, analysis of acetogenins was carried out on the extract and its solvent fractions of A. triloba leaves using a liquid chromatography mass spectroscopy(LC-MS). In the extract, the ethanolic extract was significantly higher acetogenin contents than hot water extract. In the analysis of solvent fraction from the ethanolic extract, n-hexane, ethylacetate, and aqueous fraction were contained 85.17~90.92%, 8.96~14.52% and 0.12~0.35% of total acetogenin in the extract. Based on these results, the analytical method is useful for comparing annonaceous acetogenins contents in plant samples. Moreover, when research or product development aiming at the physiological activity of acetogenin such as anticancer activity using A. triloba leaves is performed, a fractionation using a nonpolar organic solvents and alcohol extract may be useful methods. This method can also be used for the purpose of eliminating toxicity as well.

• Journal of Ginseng Research
• /
• v.1 no.1
• /
• pp.25-28
• /
• 1976

Ginseng extracts were fractionated into several fractions with various organic solvents, and the effects of these fractions on the activity of RNA polymerase were examined. Fractions which showed positive effect on the activity of RNA polymerase were obtained both from white ginseng and red ginseng. For white ginseng the components which hare shown a positive effect on RNA polymerase roue found in total methanol extracts, the residual aqueous solution from ethyl acetate extraction and the methanol insoluble fraction of the above solution, whereas for red ginseng the positive components roue found in total methanol extracts and in ethyl ether extracts. These finding suggest that the ginseng components which have Positive effect on RNA polymerase be composed of Polar and nonpolar moieties, which may be cleaved into the ports during the processing the of red ginseng.

• Journal of the Korean Chemical Society
• /
• v.28 no.3
• /
• pp.176-184
• /
• 1984

Retention behavior of benzoic acid and its derivatives on XAD-2 in the alcoholic aqueous solution was investigated and separation was attempted. Retention was affected by the concentration and kinds of added organic solvents, the pH of the aqueous solution, the added $R_4N^+$ and the position and kinds of functional group in the sample molecules. Retention of sample acids in acidic conditions was due to mainly molecular adsorption on nonpolar XAD-2 surface and that in basic conditions was due to mainly ion-pair model. In these bases a mixed sample was separated in EtOH 20% aqueous solution at pH 8.50.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.9
• /
• pp.973-980
• /
• 1998

The fluorescence spectroscopic properties of both trans and cis forms of 9-anthryiethylene derivatives such as 9-AnthCH=$CHCO_2CH_3$ [Ⅰ] and 9-AnthCH=CHCN [Ⅱ] as well as 9-AnthCH=>TEX>$CHCH_2O_2CCH_3$ [Ⅲ] and 9-AnthCH=$CHCH_2OH$ [Ⅳ] have been measured in various solvents. In nonpolar solvent, the trans-I and trans-Ⅱ show dual emission spectral bands at 340 nm and 460 nm when exciting with 270 nm while the other trans derivatives show single emission band at 430 or 460 nm. The dual emissions exhibit different excitation spectra, indicating that two emissive states are different from each other. It is interesting to note that the 340 nm emission of both trans-Ⅰ and trans-Ⅱ is enhanced at the expense of the drastic quenching of the 460 nm emission as the solvent polarity increases. The dual emissions are also observed for both cis-Ⅰ and cis-Ⅱ. The solvent dependence of the fluorescence decay times and quantum yields can be correlated with the solvent and excitation wavelength dependences of the trans→cis photoisomerization quantum yields. These results indicate that the 340 nm emission is originated from the $S_2$ state of the cis-form, and the $S_1$ state is the only singlet excited state presenting a large CT (charge transfer) character to facilitate the photoisomerization.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.679-683
• /
• 2021

Lecithin, a zwitterionic phospholipid, forms spherical reverse micelles in nonpolar organic solvents such as decane. The addition of monovalent ions like lithium chloride (LiCl) to lecithin organosols induces the transformation of organosols into organogels due to the entanglement of reverse cylindrical micelles. In this study, we investigate the effect of pentanol acting as co-surfactant on rheological properties of lecithin/LiCl mixtures. From rheological studies, we find that the viscosity and elastic property of organogels decreased upon the addition of pentanol to organogels. The decrease in viscosity and elastic property can be attributed to the shortening of reverse cylindrical micelles confirmed by small angle X-ray scattering (SAXS).

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.3
• /
• pp.211-221
• /
• 2006

This study was performed to compare with desorption efficiency and storage stability of CSC and CMS tubes for Ketones in workplace air. 1. The best desorbing solution for CSC tube was 1 % or 3 % dimethylformamide(DMF) in carbon disulfide($CS_2$). The desorption efficiencies were 96.40 % for cyclohexanone, 94.86 % for acetone, 96.96 % for methyl ethyl ketone(MEK), 103.44 % for methyl isobutyl ketone(MIBK), 100.17 % for methyl amyl ketone(MAK), 100.43 % for methyl butyl ketone(MBK), 97.01 % for toluene and 99.33 % for trichloroethylene(TCE). 2. The best desorbing solution for CMS tube was 1 % or 3 % DMF in $CS_2$. The desorption efficiencies were 96.42 % for cyclohexanone, 98.53 % for acetone, 99.67 % for MEK, 105.48 % for MIBK, 100.13 % for MAK, 100.13 % for MBK, 95.42 % for toluene and 98.15 % for TCE. 3. In the storage condition at room temperature($20^{\circ}C$), the recovery rates of cyclohexanone and MEK on CSC tube were rapidly decreased 30.9 % and 50.9 % after 4 weeks, respectively. The recovery rates of all of 6 ketones and 2 nonpolar solvents were shown over 80 % after 1 week in the storage condition of refrigerate temperature($-4^{\circ}C$), and were kept over 80 % after 4 weeks in the storage condition of freezer temperature($-20^{\circ}C$). 4. The recovery rates of cyclohexanone on CMS tube were 80.6 % for 1 week after and 60.5 % for 4 weeks after at room temperature($20^{\circ}C$). The recovery rates of cyclohexanone were shown 80.6 % for 1 week after and 60.5 % for 4 weeks after at $-4^{\circ}C$, and of 6 ketones and 2 non-polar solvents were kept stable over 85 % at $-4^{\circ}C$ and over 97 % at $-20^{\circ}C$ for 4 weeks after. In conclusion, the best desorbing solution was 1 % or 3 % DMF in $CS_2$ and more appropriate sorbent tube for ketones and non-polar solvents was CMS than CSC. We recommend CSC tube would be useful if the samples analyzed within 1 week because CMS tubes are more expensive than CSC tubes. However, if the storage time is needed more than 3 weeks, CMS tubes should be suitable and the storage condition should be below $-20^{\circ}C$.

• Analytical Science and Technology
• /
• v.6 no.5
• /
• pp.521-530
• /
• 1993

According to the Montreal Protocol, CFC 113, one of the ozone-depleting substances, will be prohibited to use as a cleaning solvent essentially in the electronic industry. Therefore, the development of the alternative cleaning solvents to CFC 113 is being accelerated. A number of the alternative cleaning solvents are avialable on the market. The alternatives of Axarel 32(DuPont), Cleanthru 750H(KAO Chemical), and EC-Ultra(Petroferm) are chosen for the comparison of cleaning performance with CFC 113. The test methods for measuring the cleaning performance were composed of the measurement of the physical properties, the experiments on the material compatibility with cleaning solvents, the measurement of the evaporation rate, and finally the experiments of the removal efficiency. Normally the basic physical properties of the alternatives had higher boiling points, viscosity and surface tension, which were quite different to those of CFC 113. In terms of solubility of rosin-based flux, the solubilities of abietic acid (nonpolar organic) were similar, but those of the activator (polar organic) in the alternatives were better than CFC 113. The evaporation of the alternatives was very slow, compared to CFC 113, which had much lower boiling point. All the cleaning solvents showed the good material compatibility with FR4 and Cu-coated PCB. The better removal efficiencies of abietic acid were obtained when using the ultrasonic mechanical energy over the dipping method. The experiments also indicated the very slow-eavaporating solvent was not desirable with the dipping cleaning method, and the differences in the removal efficiency of the alternatives with the ultrasonic cleaning method were negligible. Among the alternatives, the overall cleaning performances were obsorved as almost similar. Before selecting the ultimate cleaning solvent, the application of cleaning machine, environmental issues, and economics are simultaneously considered with the cleaning performance.