• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.2
• /
• pp.227-235
• /
• 1999

In this paper a vibration control fo a one-link flexible beam is considered. At first a state-space model for a flexible beam is derived by using the assumed-modes approach. Based on this model the transfer function between the applied torque and the tip deflection fo the beam is presented because it is convenient to apply our method. In general there exist some control difference due to flexibility of the beam so we adop a forward-passive controller to reduce these phenomena. And a complex dual-input describing function compensator is used to control the tip deflection. The stabiltiy and the performance of the closed-loop system are analyzed. Finally the validity of the derived model and the effectiveness of proposed controller are confirmed throuth simula-tions and experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1489-1494
• /
• 2003

A neuromuscular control system of a myoelectric prosthetic hand (PH) constitutes a nonlinear system with a dead zone whose magnitude is equal to its joint angle when the PH just grasps an object. This is because the neuromuscular control system remains an open-loop system until the PH grasps the object but it constitutes a feedback control system after the PH griped the object in which a torque induced in the fingers of the PH is fed back. To improve the transient performance of the control system, it is desirable to make the feed-forward gain as large as possible, so long as the stability of the system is not impaired. It is also desired that the control system remains stable even when the PH lifts a heavy or rigid object, because this makes the closed loop gain large and leads to the closed system unstable. According to the theory of stability analysis of nonlinear systems, we can only know the sufficient conditions that the system should be stable. Thus the nonlinear theory on stability is insufficient to be used to design the neuromuscular control system for improving its transient responses. This paper shows that the nonlinear system with a dead zone can be approximated to a linear feedback system and that well-known methods of analysis and design on linear control systems can be applicable. It is also shown through various simulation results that errors induced by approximation are practically negligible and thus the design methods are quite accurate.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.177-182
• /
• 1989

In this paper a new adaptive control algorithm is derived, with the unknown manipulator and payload parameters being estimated online. In practice, we may simplify the algorithm by not explicity estimating all unknown parameters. Further, the controller must be robust to residual time-varying disturbance, such as striction or torque ripple. Also, the reference model is a simple douple integrator and the acceleration input for robot manipulator consists of a proportion and derivative controller for trajectory tracking purposes. The validity of this control is confirmed in simulation where two-link robot manipulator shows the robust performances in spite of the existing nonlinear interaction and unknown parametrictings

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.573-578
• /
• 1988

The objectives of this paper are to establish an equivalent magnetic circuit of the hybrid PM step motor and to apply the canonical piecewise linear eqation and the Kazenelson algorithm of solving the nonlinear magnetic circuit, so that the static holding torque and the magnetic properties of the motor are determined. The results of that are applied to the design of the hybrid step motor.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1013-1015
• /
• 1993

The switched reluctance motor is excited and controlled by two kinds of excitation; chopped excitation and switched excitation. The former produces additional inverter losses, and onuses drive control to be complicated. The limit of chopping frequency reduces a range of operating speed and torque. This paper examines chopped excitation and switched excitation in a nonlinear switched reluctance motor. The result indicates switched excitation can be satisfactorily applied to the full operating range, and furthermore indicates the improved efficiency.

• Composites Research
• /
• v.14 no.2
• /
• pp.13-21
• /
• 2001

Substituting composite structures for conventional metallic structures has many advantages because of higher specific stiffness and specific strength of composite materials. In this work, one-piece driveshafts composed of carbon/epoxy and glass/epoxy composites were designed and manufactured for a rear wheel drive automobile satisfying three design specifications, such as static torque transmission capability, torsional buckling and the fundamental natural bending frequency. Single lap adhesive joint was used to join the composite shaft and the aluminum yoke. The torque transmission capability of the adhesively bonded composite shaft was calculated with respect to bonding length and yoke thickness by finite element analysis and compared with the experimental result. Torque transmission capability was based on the Tsai-Wu failure index fur composite shaft and the failure model which incorporated the nonlinear mechanical behavior of aluminum yoke and epoxy adhesive. From the experiments and the finite element analyses, it was found that the static torque transmission capability of the composite driveshaft was highest at the critical yoke thickness, and saturated beyond the critical length. Also, it was found that the one-piece composite driveshaft had 40% weight saving effect compared with a conventional two-piece steel driveshaft.

• Journal of Power Electronics
• /
• v.6 no.1
• /
• pp.38-44
• /
• 2006

In this paper, a speed sensorless control for an ultrasonic motor (USM) using a neural network (NN) is presented. In the proposed method, rotor speed is estimated by a three-layer NN which adapts nonlinearities associated with load torque and motor temperature into control. The intrinsic properties of a USM, such as high torque for low speeds, high static torque, compact size, etc., offer great advantages for industrial applications. However, the speed property of a USM has strong nonlinear properties associated with motor temperature and load torque, which make accurate speed control difficult. These properties are considered in designing a control method through the application of mathematical models. In these strategies, a detailed speed model of the USM is required which makes actual applications impractical. In the proposed method, a three-layer NN estimates the speed of the USM from the drive frequency, the root mean square value of input voltage and the surface temperature of the USM, where no mechanical speed sensor is needed. The NN speed based estimator enables inclusion of variations in driving conditions due to input signals of the NN involved during the driving state of the USM. The disuse of sensors offers many advantages on both the cost and maintenance front. Moreover, the model free sensorless control method offers practical controller construction within a small number of parameters. To validate the proposed speed sensorless control method for a USM, experiments have been executed under several conditions.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.2
• /
• pp.12-19
• /
• 2010

The characteristics of the torsional systems are generally examined with the nonlinearities such as the several staged clutch damper springs, gear backlashes and drag torques. Generally speaking, the system's characteristics can be found out by the eigensolutions which can show the system natural frequencies and the mode shapes. However, these factors can not give the complete solutions to avoid the noise and vibration problems related to the nonlinear effects. Therefore, several assumptions should be made for solving the real physical system problems under the linear analysis which can reflect the nonlinear effects in the torsional system. This means that the several modified linear factors such as the modified clutch damper spring constants can be used to examine and avoid the natural frequency zones related to the noise and vibration problems. Under the linear analysis with the assumed and modified values, the system can be investigated with the more reliable ways for the realistic phenomena.

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.343-353
• /
• 2009

In this paper, a nonlinear controller is proposed for Doubly-Fed Induction Machine (DFIM) drives. The nonlinear controller is designed based on an adaptive backstepping control technique, using a fifth order model of an induction machine in the synchronous d & q axis rotating reference frame, whose d axis coincides with the space voltage vector of the main AC supply, and using the rotor current and stator flux components as state variables. The nonlinear controller can perfectly track the torque reference signal measured in the stator terminals under the condition of unity power factor regulation, in spite of the stator and rotor resistance variations. In order to make the drive system capable of operating in the motoring and generating modes below and above the synchronous speed, two level Space-Vector PWM (SV-PWM) back-to-back voltage source inverters are employed in the rotor circuit. It is confirmed through computer simulation results that the proposed control approach is effective and valid.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.430-438
• /
• 2011

This article proposes a robust nonlinear control based on Lyapunov's redesign, whose purpose is to deal with parametric uncertainty in the resistance of the motor windings. The robust controller design is based on the passivity properties of the motor, as well as energy shaping and damping injection. The application of this control technique is focused on electric vehicles mainly formed by a battery bank, a power inverter, an AC brushless motor and the mechanical transmission. The sine PWM technique is used to trigger the switching devices of inverter. The results were obtained from simulation, where is shown that robust control makes a proper tracking of electromagnetic torque.