• 한국구조물진단유지관리공학회 논문집
• /
• 제18권1호
• /
• pp.19-30
• /
• 2014

본 연구에서는 강주탑 기부와 기초콘크리트 연결 구조에 대해서 국내에서 특수교량의 강주탑 기부 설계에 보편적으로 적용하고 있는 명석해협대교(明石海峽大橋) 시방기준과 비선형 FEM 해석결과를 비교하였다. 명석해협대교(明石海峽大橋) 시방기준은 1970년도에 만들어진 일본 기준으로 주탑 기부와 PS 강봉 및 기초콘크리트를 스프링으로 선형 모델링하여 설계하는 방법으로서 43년이 지난 지금까지도 간편성을 이유로 이 기준을 적용하고 있다. 그러나 비선형 FEM 해석결과의 비교를 통해 특수 장대교의 강주탑 기부의 해석 및 설계에 이 기준을 적용하는 것은 여러 가지 문제점이 있음을 알 수 있었으며, 풍하중, 지진하중에 주요하게 저항하면서도 다양한 부재들로 복잡하게 연결된 강주탑 기부에 대해서는 한계상태설계법으로 발전하려는 현 시대에 맞추어 실제 거동을 반영하는 비선형 FEM해석을 적용해야 할 것이다.

• 대한토목학회논문집
• /
• 제33권1호
• /
• pp.101-113
• /
• 2013

반복적인 하중을 받는 볼트 연결부의 비선형적인 거동을 예측할 수 있는 역학적 고등해석 모델을 개발하는 데 주된 초점을 두어 본 연구를 수행하였다. 또한 대표적인 접합부 형태인 T-stub 접합부의 연결 컴포넌트에 대한 실제의 하중 재하 실험값을 활용한 해석으로 얻어진 거동에 대한 예측의 정확성 및 모형화의 타당성을 입증하였다. 연결부를 이루고 있는 구성요소들의 거동은 볼트의 인장변형, T-stub 플랜지의 휨변형, T-stub 몸체의 신장, 전단볼트의 지압 및 미끄러짐을 포함하며 접합부내에서 개별적인 힘-변위 메커니즘으로부터 정의된 다중 선형의 강성모델에 의하여 재현된다. 이러한 구성요소들은 그들의 거동특성을 지닌 비선형 스프링으로 모형화되어 역학적 해석 모델에 설치되어 연결부 전체의 거동을 수치해석적인 방법으로 예측하도록 한다. 해석 모델에 의한 예측값은 강성, 강도 및 변형 측면에서 실험값과 비교하여 정확성을 평가하였으며 이를 근거로 본 연구에서 제안된 역학적 해석 모델이 볼트 연결부의 거동과 성능을 만족하며 예측 가능하다는 결론을 내렸다.

• Smart Structures and Systems
• /
• 제24권1호
• /
• pp.1-14
• /
• 2019

Transmission tower-line system is one of most critical lifeline systems to cities. However, it is found that the transmission tower-line system is prone to be damaged by earthquakes in past decades. To mitigate seismic demands, this study introduces a tuned-mass damper (TMD) using superelastic shape memory alloy (SMA) spring for the system. In addition, considering the dynamic characteristics of both tower-line system and SMA are affected by temperature change. Particular attention is paid on the effect of temperature variation on seismic behavior. In doing so, the SMA-TMD is installed into the system, and its properties are optimized through parametric analyses. The considered temperature range is from -40 to $40^{\circ}C$. The seismic control effect of using SMA-TMD is investigated under the considered temperatures. Interested seismic performance indices include peak displacement and peak acceleration at the tower top and the height-wise deformation. Parametric analyses on seismic intensity and frequency ratio were carried out as well. This study indicates that the nonlinear behavior of SMA-TMD is critical to the control effect, and proper tuning before application is advisable. Seismic demand mitigation is always achieved in this wide temperature range, and the control effect is increased at high temperatures.

• 한국지능시스템학회논문지
• /
• 제24권3호
• /
• pp.245-250
• /
• 2014

중독은 크게 매개체 자체가 중독성을 가진 매개성 중독과 매개체 자체가 중독성을 가진 것이 아니라 예민한 개인과 잠재된 어떤 행동과 결합하여 중독을 유발하는 유발성 중독으로 나눌 수 있다. 매개성 중독은 약물 중독, 알코올 중독과 주로 화학물질의 직접 적인 원인이 되어 중독현상을 일으킨다. 유발성 중독은 쇼핑 중독, 일 중독, 게임 중독, 인터넷 중독, TV중독, 도박 중독 등의 사이버 중독이 있다. 유발성 중독은 개인의 감수성의 문제로서 개인에 따른 편차가 존재한다. 본 논문에서는 전기 시스템의 R-L-C 직렬 회로와 기계 시스템의 Spring-Damper-Mass를 이용하여 등가적으로 동일한 2차원의 중독 모델을 제안한다. 제안한 중독 모델에 비선형 항을 추가하여 Duffing을 구성한 후 파라미터 변화에 의해 주기운동과 카오스 운동을 시계열과 위상공간으로 나타내었다. 또한 파라미터 중 통제계수의 변화에 의해 주기 운동은 중독 되기 전의 상태를 카오스 운동은 중독된 상태임을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.864-870
• /
• 2005

Hydraulic excavators have been popular devices in construction field because of its multi-workings and economic efficiency. The mathematical models of excavators have many nonlinearities because of nonlinear opening characteristics and dead zone of main control valve, oil temperature variation, etc. The objective of this paper is to develop a simulator for hydraulic excavator using AMESim. Components and whole circuit are expressed graphically. Parameters and nonlinear characteristics are inputted in text style. From the simulation results, fixed spring stiffness of MCV can't satisfy accuracy of spool displacement under whole P-Q diagrams. Closed loop type MCV containing proportional gain is proposed in this paper that can reduce displacement error. The ability of closed loop MCV is verified through comparing with normal type MCV using AMESim simulator. The simulator can be used to forecastexcavator behavior when new components, new mechanical attachments, hydraulic circuit changes, and new control algorithm are applied. The simulator could be a kind of development platform for various new excavators.

• Computers and Concrete
• /
• 제27권2호
• /
• pp.131-141
• /
• 2021

This paper aims at investigating the capability of different FRP/concrete interface models to predict the effect of carbon nanotubes on the flexural behavior of RC beams strengthened with CFRP. Three different interfacial bond models are proposed to simulate the adhesion between CFRP composites and concrete, namely: full bond, nonlinear spring element, and cohesive zone model. 3D Nonlinear finite element model is developed then validated using experimental work conducted by the authors in a previous investigation. Cohesive zone model (CZM) has the best agreement with the experimental results in terms of load-deflection response. CZM is the only bond model that accurately predicted the cracks patterns and failure mode of the strengthened RC beams. The FE model is then expanded to predict the effect of bond strength on the flexural capacity of RC beams strengthened with externally bonded CNTs modified CFRP composites using CZM bond model. The results reveal that the flexural capacity of the strengthened beams increases with increasing the bond strength value. However, only 23% and 22% of the CFRP stress and strain capacity; in the case of full bond; can be utilized before failure.

• 한국정밀공학회지
• /
• 제28권7호
• /
• pp.821-826
• /
• 2011

This paper deals with an analysis of dynamic mechanism for the industrial two-step folding automatic door. A nonlinear equation of motion was derived in terms of folding angle to estimate driving forces. Based on this dynamic behavior, time taken during the door's opening well as their velocities were controlled so that the operating conditions can be obtained for the purpose of design. The stiffness of twisting spring was also investigated when the automatic door closed, because a dangerous accident takes place from the door's free falling. The current research will be a very useful tool in the near future for the dynamic analysis for the multi-step folding automatic door.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.249-257
• /
• 1996

Dynamic Analysis of Precast Concrete Large Panel Structures with Horizontal Joints The damage in precast large panel structures subjected to destructive earthquakes is generally localized in the joints. Particularly, the horizontal joints influence on the stability and integrity of the overall structure. In this research a dynamic analysis was carried out by the macro model that idealized the horizontal joints as inelastic-nonlinear spring systems. It is capable of simulating the behavior of precast concrete structures using the mathematical model. As a result of the dynamic parametric study for the case of 0.12g peak base accelerations, it is found that all joints behave elastically for sliding and opening and that all forces are well distributed without excessive local concentration on my horizontal joints.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.289-294
• /
• 2001

Three kinds of viscoelastic damper model, which has a non-linear spring as an element is studied analytically and numerically. The behavior of the damper model shows non-linear hysteresis curves which is qualitatively similar to those of real viscoelastic materials. The motion is governed by a non-linear constitutive equation and an additional equation of motion. Harmonic balance method is applied to get analytic solutions of the system. The frequency-response curves show that multiple solutions co-exist and that the jump phenomena can occur. In addition, it is shown that separate solution branch exists and that it can merge with the primary response curve. Saddle-node bifurcation sets explain the occurrences of such non-linear phenomena.

• 한국소음진동공학회논문집
• /
• 제12권1호
• /
• pp.57-64
• /
• 2002

Three kinds of viscoelastic damper model, which has a non-linear spring as an element is studied analytically and numerically The behavior of the damper model shows non-linear hysteresis curves which is qualitatively similar to those of real viscoelastic materials. The motion is governed by a non-linear constitutive equation and an additional equation of motion. Harmonic balance method is applied to get analytical solutions of the system. The frequency-response curves sallow that multiple solutions co-exist and that the jump phenomena can occur. In addition, it is shown that separate solution branch exists and that it can merge with the primary response curve. Saddle-node bifurcation sets explain the occurrences of such non-linear Phenomena.