• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제9권2호
• /
• pp.76-82
• /
• 2009

A Heating, Ventilating and Air Conditioning (HVAC) system is a nonlinear multi-input multi-output (MIMO) system. This system is very difficult to control the temperature and the humidity ratio of a thermal space because of complex nonlinear characteristics. This paper proposes an adaptive fuzzy output feedback control based on observer for the nonlinear HVAC system. The nonlinear HVAC system is linearized through dynamic extension. State observers are designed for estimating state variables of the HVAC system. Fuzzy systems are employed to approximate uncertain nonlinear functions of the HVAC system with unavailable state variables. The obtained controller compares with an adaptive feedback controller. Simulation is given to demonstrate the effectiveness of our proposed adaptive fuzzy method.

• 전자공학회논문지SC
• /
• 제45권1호
• /
• pp.9-14
• /
• 2008

본 논문에서는 다입력 다출력 비선형 시스템에 대한 관측기 설계 방법을 제안한다. 먼저 관측기 설계를 위한 삼각구조를 갖는 비선형 시스템을 정의한다. 또한 제안한 관측기의 안정도를 증명하는데 중요한 역할을 하는 가관측성 행렬을 다입력 다출력 시스템으로 확장한다. 확장된 가관측성 행렬을 이용하여 상태변수와 시스템 입력의 유계 조건하에서 제안한 관측기가 로컬 영역에서 지수 함수적 수렴성을 가짐을 증명한다. 마지막으로 제안한 결과의 유효성을 증명하기 위하여 모의실험 예제를 제공한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 추계학술대회 논문집
• /
• pp.53-56
• /
• 2002

This paper presents neural observer that used to deadbeat load torque observer. Most practical systems are nonlinear, and it is general practice to use linear models to simplify their analysis and design. However, the locally linearized model is invalid for a large signal change. The neural observer is suggested to increase the performance of the load torque observer and main controller The output error and estimeted state is trianed by neural network of neural observer. As a result, the state estimation error is minimised and deadbeat load torque observer make use of corrected esimation state. To reduce of the noise effect of deadbeat load torque observer, the post-filter which is implemented by MA process, is adopted. As a result, the proposed control system becomes a robust and precise system against the load torque. A stability and usefulness, through the verified computer simulation, are shown in this paper.

• 전자공학회논문지
• /
• 제50권7호
• /
• pp.253-257
• /
• 2013

본 논문은 지연된 출력과 미지의 외란을 갖는 비선형 시스템에 대한 강인 관측기 설계방법을 제안한다. 지연된 출력의 존재에도 불구하고 관측기의 추정오차에 대한 외란의 효과를 원하는 수준까지 줄일 수 있음을 보인다. 강인 관측기의 존재조건은 시간 지연 값에 의존적인 선형행렬 부등식을 이용하여 제시한다. 마지막으로 제안한 결과의 유효성을 증명하기 위하여 수치 예제를 제공한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.692-697
• /
• 2001

A precise tracking control scheme on the system in presence of nonlinear dynamic friction is proposed. In this control scheme, the standard SMC is combined with the nonlinear observer to estimate the dynamic friction state that is impossible to measure. Then this control scheme has the good tracking performance and the robustness to parameter variation compared with the standard SMC and the PiD based nonlinear observer control system. This fact is proved by the experiment on the ball-screw driven servo system with the dynamic friction model.

• 제어로봇시스템학회논문지
• /
• 제14권1호
• /
• pp.42-48
• /
• 2008

This paper presents an observer design method for a special class of multi input multi output(MIMO) nonlinear systems. First, we characterize the class of MIMO nonlinear systems with a block triangular structure. Also, the observability matrices for SISO nonlinear systems are extended to MIMO systems. By using the generalized observability matrices, it is shown that under the boundedness conditions of system state and input, the proposed observer guarantees the local exponential stability of error dynamics. Finally, its application to induction motor is given to verify the proposed method.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권3호
• /
• pp.244-250
• /
• 2002

This paper proposed a modified observer based on Busawon's high gain observer using an appropriate time depended function, which can be chosen to make each estimated state converge faster to its real value. The stability of the modified observer is proved by using Lyapunov function. The modified nonlinear observer is applied to estimate the states in stirred tank bioreactor: out-put substrate concentration, output biomass concentration and the specific growth rate of the process. The convergences of the modified observer and Busawon's observer are compared trough simulation results. As the results, the modified observer converges faster to its real value than the well-known Busawon's observer.

• 한국항공우주학회지
• /
• 제41권4호
• /
• pp.284-290
• /
• 2013

위성의 각속도를 추정하고 반작용 휠의 고장을 검출하기 위하여 비선형 미지입력 관측기를 제안하였다. 위성의 각속도 추정을 위해서 입력 값을 필요로 하는데, 구동기에 고장이 발생하는 경우에 정확한 각속도 추정이 어렵다. 미지입력 관측기는 미지의 고장에 영향을 받지 않으면서 상태추정이 가능하다. 본 논문에서는 SDRE 기법을 적용하여 비선형 미지입력 관측기를 설계하였고, 시뮬레이션을 이용하여 제안한 방법을 검증하였다. 다양한 형태로 동시에 고장이 발생하더라도, 각속도 추정 및 고장 검출이 가능하였다.

• 대한수학회지
• /
• 제49권3호
• /
• pp.641-658
• /
• 2012

The goal of this paper is to develop a nonlinear observer-based control strategy for a multi-variables continuous stirred tank reactor (CSTR). A new robust nonlinear observer is constructed to estimate the whole process state variables. The observer is coupled with a nonlinear controller, designed based on the input-output linearization for controlling the concentration and reactor temperature. The closed loop system is shown to be globally asymptotically stable based on Lyapunov arguments. Finally, computer simulations are developed for showing the performance of the proposed controller.

• 동력기계공학회지
• /
• 제17권3호
• /
• pp.82-88
• /
• 2013

For commercialized servo drives of the motion stage to include embedded controller, external terminal is provided for tracking command and encoder output, but internal terminal is not for control input. Thus, it is difficult to combine out signal of embedded controller with that of external compensator such as disturbance observer. In this study, for precise tracking control of motion stage without hardware change of the servo drive, tacking control system is composed of an inner loop of servo drive and an outer loop of disturbance observer. Then, the control system is designed so that the output response of actual plant corresponds with nominal model's in transient state as well as in steady state. Finally, the experiment results show that the designed control system is effective to reconcile actual plant behavior with nominal model under nonlinear friction and parameter perturbation.