• International Journal of Ocean System Engineering
• /
• 제3권2호
• /
• pp.68-76
• /
• 2013

In this study, a 3D numerical model was used to predict nonlinear wave forces on a cylindrical pile installed in a shallow water region. The model was based on solving the viscous and incompressible Navier-Stokes equations for a two-phase flow (water and air) model and the volume of fluid method for treating the free surface of water. A new application was developed based on the cut-cell method to allow easy installation of complicated obstacles (e.g., bottom geometry and cylindrical pile) in a computational domain. Free-surface elevation, water particle velocities, and inline wave forces were calculated, and the results show good agreement with experimental data obtained by the Danish Hydraulic Institute. The simulation results revealed that the proposed model can, without the use of empirical formulas (i.e., Morison equation) and additional wave analysis models, reliably predict non-linear wave forces on an offshore wind turbine foundation installed in a shallow water region.

• 대한조선학회논문집
• /
• 제28권1호
• /
• pp.38-52
• /
• 1991

자유표면하에서 움직이는 임의의 형상의 3차원 물체로 인한 비선형 유체력을 준 Lagrangian 방법을 사용하여 해석하였다. 경계치 문제는 경계 적분 방법(Boundary Integral Method)을 이용하여 해결하였으며, 물체와 자유 표면의 형상은 곡면 Panel로 표현하였다. 이들 표면은 hi-cubic B-spline 방법을 사용하여 유한개의 작은 표면 요소로 나뉘어지게 되며, 또한 \phi와 (equation omitted) 표면 요소상에서 bi-linear하다고 가정한다. 특이점에 의한 유기 포텐시얼의 계산시 1/R에 비례하는 부분은 제거하고 해석적으로 처리하였다. 물체로부터 멀리 떨어진 곳에서의 유체 유통은 좌표계의 원점에 위치한 Dipole로 표현하였으며, Time Stepping시 Runge-Kutta의 4차 방법을 사용하였다. 3차원인 경우에 대한 적분 방정식과 포텐시얼의 시간 미분간에 대한 경계 조건이 유도되었으며, 이러한 식들을 사용하여 자유표면의 형상과 물체의 운동을 동시에 계산하였다. 대진폭을 가지고 규칙적으로 진동하는 물체에 작용하는 힘과 이때의 자유 표면 형상을 계산하고 기 발표된 자료와 비교하여 보았으며, 자유표면 근처에서 운동하는 물체에 작용하는 비선형 효과를 관찰하였다.

• 대한조선학회논문집
• /
• 제31권3호
• /
• pp.80-86
• /
• 1994

자유수면을 항주하는 선박에 의하여 발생되는 비선형 조파현상을 해석하기 위한 수치해석법을 개발하였다. 유동은 비점성, 비압축성으로 가정하고 선체 및 자유수면 형상과 일치하는 좌표계의 생성을 위하여 타원형 편미분방정식을 수치해석하여 물체적합 좌표계를 생성하였으며 변환된 정규격자 물체적합 좌표계에 대한 Euler방정식을 유한차분법(Finite Difference Method)을 이용하여 계산하였다. 수치해석을 위하여 시간에 대한 미분항은 전진차분, 공간에 대한 미분항은 중심차분법으로 이산화하였고 대류항에는 수치계산의 안정을 위해 인위적인 소산(dissipation)항을 첨가하였다. 자유수면의 형상은 매 시간 단계마다 자유수면 경계조건들을 만족하도록 다시 계산되었고 격자점들은 자유수면형상의 변화에 적합하게 다시 생성되도록 하였으며 압력에 대한 Poisson방정식은 반복연산법에 의하여 풀고 그 결과를 이용하여 속도를 외삽하였다. 개발된 수치해석법의 검증을 위해 수식선형인 Wigley 모형에 대한 계산을 Fn=0.250-0.408에 대하여 수행하고, 그 결과를 실험 결과와 비교하여 잘 일치함을 보였다.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2342-2354
• /
• 2002

The present study has numerically predicted both the flow -induced and thermally-induced residual stresses and birefringence in injection o. injection/compression molded center -gated disks. Analysis system for entire molding process was developed based on an ap propriate physical modeling including a nonlinear viscoelastic fluid model, stress-optical law, a linear viscoelastic solid model, free volume theory for density relaxation phenomena and a photoviscoelasticity and so on. Part I presents physical modeling a nd typical numerical analysis results of residual stresses and birefringence in the injection molded center-gated disk. Thermal residual stress was found to be extensional near the center, compressive near the surface and tend to become toward tensional at the surface. A double-hump profile was obtained across the thickness in birefringence distribution: nonzero birefringence is found to be thermally induced, the outer peak is due to the shear flow and subsequent stress relaxation during the filling stage a nd the inner peak is due to the additional shear flow and stress relaxation during the packing stage. Predicted birefringence including both the flow -induced and thermally-induced one becomes quite similar to the experimental one.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.326-334
• /
• 2010

In this study, we provide a comprehensive review of the CIP(Constrained Interpolation Pro file/Cubic Interpolated Propagation) method with a pressure-based algorithm that is known as a general numerical solver for soled liquid, gas and plasmas. And also we introduce a body-fitted grid system(Soroban grid) for computation of strongly nonlinear marine hydrodynamic problems such as slamming water on deck, wave impact by green water. This grid system can keep the third-order accuracy in time and space with the help of the CIP method. The grid system consists of the straight lines and grid points. In the 2-dimensional grid case, each grid points moving in these lines like abacus - Soroban in Japanese. The length of each line can be different and the number of grid points in each line can be different. Mesh generation and searching of upstream departure point are very simple and possible to mesh-free treatment. To optimize computation of free-surface and multi-fluid flows, We adopt the C-CUP method. In most of the earlier computations, the C-CUP method was used with a staggered-grid approach. Here, because of the mesh free nature of the Soroban grid, we use the C-CUP method with a collocated-grid approach.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권1호
• /
• pp.14-24
• /
• 2015

A three-dimensional multidirectional nonlinear numerical wave tank (NWT) based on the Navier-Stokes equations and the Finite Volume Method (FVM) is developed by using the two-phase hydrodynamic flow solver naoe-FOAM-SJTU based on the open source toolbox OpenFOAM. The free surface is capturing with the Volume Of Fluids (VOF). The directional wave including Stokes wave, solitary wave and nonlinear wave are simulated and verified. The multi-directional waves are also simulated with particular wave spectral such as JONSWAP and wave directional spreading function. The obtained numerical results show the capability of the solver to generate different type of multidirectional nonlinear waves accurately. Meanwhile, it implies that the presented NWT can easily extend to model the wave-structures interactions, which will be great help to the offshore structures design.

• International Journal of Ocean System Engineering
• /
• 제4권1호
• /
• pp.49-56
• /
• 2014

A three-dimensional multidirectional nonlinear numerical wave tank (NWT) based on the Navier-Stokes equations and the Finite Volume Method (FVM) is developed by using the two-phase hydrodynamic flow solver naoe-FOAM-SJTU based on the open source toolbox OpenFOAM. The free surface is capturing with the Volume Of Fluids (VOF). The directional wave including Stokes wave, solitary wave and nonlinear wave are simulated and verified. The multi-directional waves are also simulated with particular wave spectral such as JONSWAP and wave directional spreading function. The obtained numerical results show the capability of the solver to generate different type of multidirectional nonlinear waves accurately. Meanwhile, it implies that the presented NWT can easily extend to model the wave-structures interactions, which will be great help to the offshore structures design.

• 한국해안해양공학회지
• /
• 제3권3호
• /
• pp.176-183
• /
• 1991

본 연구는 경계요소법을 이용하여 비선형 자유표면파을 해석한 것이며, 가상경계처리는 유체 연속성을 고려하여 mass-flux와 energy-flux를 사용하여 유한진폭파동의 해석수법을 제시했다. 유체의 비선형성 때문에 증분법을 적용했으며 경계요소법에 의해 얻어진 결과는 유한요소법의 결과와 실험치와 비교하여 보았으며 좋은 일치가 얻어 졌다. 따라서, 이 방법은 광범위한 파동문제 해석에 유효하게 이용될 수 있으리라 사료된다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.403-406
• /
• 2006

A particle method recognized as one of gridless methods has been developed to investigate the nonlinear free-surface motions interacting to the structures. The method is more feasible and effective than convectional grid methods in order to solve the flow field with complicated boundary shapes. In the present study, breaking waves with a floating body are simulated to investigate fluid-structure interactions in the coastal zone.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.388-397
• /
• 2010

A two-dimensional time-domain, potential-theory-based fully nonlinear numerical wave tank (NWT) was developed by using boundary element method and the mixed Eulerian-Lagrangian (MEL) approach for free-surface node treatment. The NWT was applied to prediction of primary wave energy conversion efficiency of a bottom-mounted oscillating water column (OWC) wave power device. The nonlinear free-surface condition inside the chamber was specially devised to represent the pneumatic pressure due to airflow velocity and viscous energy loss at the chamber entrance due to wave column motion. The newly developed NWT technique was verified through comparison with given experimental results. The maximum energy extraction was estimated with various chamber-air duct volume ratios.