• 한국안전학회지
• /
• 제20권2호
• /
• pp.67-72
• /
• 2005

This paper proposes the influences of harmonic current on electrical characteristics of an induction motor. Recently, a power system gets more worse as nonlinear load makes harmonics to affect energy lose of system and shorten lift of machines. In this paper, the electrical effect and THD(Total Harmonic Distortion) of harmonic current to an induction motor which is of great use in the industrial fields are measured and analyzed. A power conversion equipment(inverter) is installed to produce harmonics and variable reactors are installed to reduce the harmonics having an effect on the input terminal. Then the effects of the reactors are measured and analyzed. Also average voltage, current, power and 110 by harmonics are analyzed. The results show that Inn is increased by increasing load of the induction motor and installing reactors. And the harmonics affecting the input terminal are decreased by increasing reactor 3[mH] to 6[mH], however, average power of the induction motor is decreased. Therefore, it is very important that reactors should be carefully installed considering the merits and demerits resulting from the installation of reactors.

• 한국인터넷방송통신학회논문지
• /
• 제16권1호
• /
• pp.109-114
• /
• 2016

본 논문은 디지털 무선 전송시 채널에서 발생되는 부호간 간섭과 잡음의 영향을 최소화하기 위한 CCA (Compact Constellation Algorithm) 등화 알고리즘에서 적응 스텝 크기를 적용하여 이의 등화 성능 개선에 관한 것이다. 일반적으로 등화 알고리즘에서 적응을 위한 스텝 크기는 고정적으로 사용하지만, 제안 알고리즘에서는 등화를 위한 스텝 크기를 비선형 함수인 오차 신호에 비례하도록 변화시킨다. 이의 개선된 등화 성능을 보이기 위하여 등화기 출력 성상도, 잔류 isi, 최대 찌그러짐과 MSE와 SER을 적용하였으며, 이들을 고정 스텝 크기를 갖는 기존 CCA와 비교하였다. 컴퓨터 시뮬레이션의 결과 정상 상태 이후에서는 적응 스텝 방식의 CCA가 고정 스텝 방식의 CCA보다 우월함을 확인하였다.

• Journal of information and communication convergence engineering
• /
• 제21권2호
• /
• pp.103-109
• /
• 2023

We investigated the antipodal-symmetric dispersion maps of a dispersion-managed link with a midway optical phase conjugator to compensate for the distorted 960 Gb/s wavelength division multiplexed (WDM) signal caused by these effects. The proposed antipodal-symmetric dispersion map has various shapes depending on the detailed design scheme. We confirmed that the dispersion-managed link designed with the dispersion map of the antipodal-symmetric structure is more advantageous than the conventional uniform dispersion map for compensating WDM channels. It was also confirmed that among the antipodal-symmetric structures, the dispersion map configured with the S-1-profile, in which S is inverted up and down, was more effective for distortion compensation than the dispersion map configured with the S-profile. In particular, we confirmed that the S-1-profile can broaden the optical pulse width intensively at a short transmission distance, more effectively compensating for the distorted WDM channel. Because this structure makes the intensity of the optical pulse relatively weak, it can decrease the nonlinear Kerr effect.

• 한국항행학회논문지
• /
• 제7권2호
• /
• pp.128-134
• /
• 2003

광섬유의 색 분산과 자기 위상 변조 외에 상호 위상 변조 효과에 의해 왜곡된 WDM 채널 신호가 MSSI(Mid-Span Spectral Inversion) 기법을 통해 전송 거리에 따라 보상되는 정도를 다양한 광섬유 분산 계수를 고려하여 분석해 보았다. 본 연구에서 고려된 시스템은 전체 전송로의 중간에 비선형 매질로 HNL-DSF (Highly nonlinear dispersion shifted fiber)를 갖는 광 위상 공액기를 두고, 광 위상 공액기를 중심으로 첫 번째 전송 구간에서의 평균 강도와 두 번째 전송 구간에서의 평균 강도를 같게 하는 PAIA (Path Averaged Intensity Approximation) 방식의 MSSI 기법을 채택한 $3{\times}40$ Gbps 강도 변조 직접 검파 방식의 WDM 시스템이다. XPM에 의한 왜곡의 보상 측면에서 광섬유의 분산 계수가 비교적 큰 WDM 시스템일수록 MSSI 기법이 더욱 효과적으로 적용되어 전송 거리를 신장시킬 수 있는 것을 확인할 수 있었다. 또한 색 분산, SPM 외에 XPM의 영향을 받아 왜곡된 채널 신호는 MSSI 기법을 통해 광섬유의 분산 계수가 큰 시스템에서 더욱 안정되게 보상된다는 것을 알 수 있었다.

• 한국전자파학회논문지
• /
• 제14권7호
• /
• pp.741-749
• /
• 2003

광섬유의 색 분산과 자기 위상 변조 외에 상호 위상 변조 효과에 의해 왜곡된 WDM 채널 신호가 MSSI (Mid-Span Spectral Inversion) 기법을 통해 보상되는 정도를 다양한 광섬유 분산 계수를 고려하여 분석해 보았다. 본 연구에서 고려된 시스템은 120 Gbps (3$\times$40 Gbps) 강도 변조 직접 검파 방식의 WDM 시스템이다. 또한 전체 전송로의 중간에 비선형 매질로 HNL-DSF(Highly nonlinear dispersion shifted fiber)를 갖는 광 위상 공액기를 두고, 광 위상 공액기를 중심으로 첫 번째 전송 구간에서의 평균 강도와 두 번째 전송 구간에서의 평균 강도를 같게 하는 PAIA(Path Averaged Intensity Approximation) 방식 의 MSSI 기법을 채택한 시스템이다. 채널별 보상 특성의 분석은 1 dB 기준 눈 열림 패널티(Eye Opening Penalty)를 이용했다. 색 분산과 비선형 효과에 의한 채널 신호 왜곡이 유도될 수 있는 장거리 WDM 시스템에 MSSI 기법을 적용하면 전송 거리와 전송 품질을 단일 채널 전송 이상으로 개선시킬 수 있고, 상호 위상 변조에 의한 왜곡의 보상 측면에서 MSSI 기법은 광섬유의 분산 계수가 비교적 큰 WDM 시스템에 더욱 유효하다는 것을 확인할 수 있었다.

• 비파괴검사학회지
• /
• 제26권6호
• /
• pp.417-426
• /
• 2006

A Digital X-ray imaging system using Compton backscattering has been developed to obtain a cross-sectional profile and mass loss of corroded lap-splices of aging aircraft from density variation. A slit-type camera was designed to focus on a small scattering volume inside the material, from which the backscattered photons are collected by a collimated scintillator detector for interpretation of material characteristics. The cross section of the lap-joint is scanned by moving the scattering volume through the thickness direction of the specimen. The mass loss of each layer has been estimated from a Compton backscatter A-scan to obtain the thickness of each layer including the aluminum sheet, the corrosion layer and the sealant. Quantitative information such as location and width of planar corrosion in the lap splices of fuselages is obtained by deconvolution using a nonlinear least-square error minimization method(BFGS method): A simple reconstruction model is also introduced to overcome distortion of the Compton backscatter data due to attenuation effects attributed to beam hardening and quantum noise.

• Journal of information and communication convergence engineering
• /
• 제14권2호
• /
• pp.71-77
• /
• 2016

The combination of dispersion management (DM) and midway optical phase conjugation (OPC) is one of the promising techniques for compensating for optical signal distortion due to group velocity dispersion and nonlinear fiber effects. However, in this combination technique, midway OPC restricts the flexible optical link configuration. Therefore, the possibility of implementing the flexible optical link configuration with non-midway OPC applied to complete inline DM links is investigated in this study. It is confirmed that although the compensation using non-midway OPC for the distorted WDM channels is less effective than that using midway OPC, when non-midway OPC is placed at positions closer to the transmitters, the deployment of precompensation (i.e., the sequence of DCF + SMF)-OPC-postcompensation (i.e., the sequence of SMF + DCF) is more advantageous for the compensation. On the other hand, inverse deployment with respect to OPC (i.e., postcompensation-OPC-precompensation) is more advantageous when non-midway OPC is placed at positions closer to the receivers.

• Advances in materials Research
• /
• 제5권4호
• /
• pp.205-221
• /
• 2016

In this article, the buckling responses of functionally graded curved (spherical, cylindrical, hyperbolic and elliptical) shell panels under elevated temperature load are investigated numerically using finite element steps. The effective material properties of the functionally graded shell panel are evaluated using Voigt's micromechanical model through the power-law distribution with and without temperature dependent properties. The mathematical model is developed using the higher-order shear deformation theory in conjunction with Green-Lagrange type nonlinear strain to consider large geometrical distortion under thermal load. The efficacy of the proposed model has been checked and the effects of various geometrical and material parameters on the buckling load are analysed in details.

• Journal of information and communication convergence engineering
• /
• 제12권2호
• /
• pp.75-82
• /
• 2014

Dispersion management (DM), optical phase conjugation (OPC), and the combination of DM and OPC are promising techniques to compensate for optical signal distortion due to group velocity dispersion and nonlinear Kerr effects. The system performance improvement in DM links combined with OPC has been reported; however, the fixed residual dispersion per span (RDPS) usually used in these links restricts the flexibility of link configuration. Thus, in this paper, a flexible optical link configuration with artificially distributed single-mode fiber (SMF) lengths and RDPS in the combination of DM and OPC is proposed. Simulation results show that the best artificial distribution pattern is the gradually descending distribution of SMF lengths and the gradually ascending distribution of RDPS, as the number of fiber spans is increased, regardless of the average RDPS, the optimal net residual dispersion, and the dispersion coefficient of the dispersion compensating fiber.

• Journal of information and communication convergence engineering
• /
• 제13권4호
• /
• pp.228-234
• /
• 2015

The system performance improvement in dispersion managed (DM) links combined with optical phase conjugator (OPC) for compensating for optical signal distortion due to group velocity dispersion and nonlinear fiber effects has been reported. However, in DM link combined OPC, the equalities of the lengths of single-mode fibers (SMFs), the length of dispersion compensating fibers (DCFs), the dispersion coefficient of DCF, and the residual dispersion per span (RDPS) with respect to an OPC restrict a flexible link configuration. Thus, in this paper, we propose a flexible optical link configuration with inequalities of link parameters, the so-called "pseudo-symmetric configuration." Simulation results show that, in the restricted RDPS range of 450 ps/nm to 800 ps/nm, the improvement in the system performance of the proposed pseudo-symmetrically configured optical links is better than that of the asymmetrically configured optical links. Consequently, we confirmed that the proposed pseudo-symmetric configuration is effective and useful for implementing a reconfigurable long-haul wavelength-division multiplexing (WDM) network.