• Title/Summary/Keyword: Nonionic

Search Result 401, Processing Time 0.031 seconds

New Analytical Method Using Polar Modifiers in Supercritical Fluid Chromatography and Its Application to the Separation of Fatty Alcohol Ethers

  • 표동진;이규선;이학주;김호현;Milton L. Lee
    • Bulletin of the Korean Chemical Society
    • /
    • v.17 no.6
    • /
    • pp.496-498
    • /
    • 1996
  • Fatty alcohol ethers, nonionic surfactants which are used as general purpose emulsifiers were separated by use of water-modified carbon dioxide mobile phase in capillary supercritical fluid chromatography. Much greater peak intensities and improved separation were observed in the chromatogram with on-line modified mobile phase than with pure CO2. A simple method for the preparation of on-line modified mobile phase is also introduced.

Micellar Solubilization of Cholesterol, Cholesteryl Myristate and Gallstones by Synthetic Surfactants

  • Han, Suk-Kyu;Kim, Nam-Hong
    • YAKHAK HOEJI
    • /
    • v.21 no.3
    • /
    • pp.135-140
    • /
    • 1977
  • Solubilization of cholesterol, its fatty acid esters and gallstones were undertaken employing nonionic, anionic and cationic surfactants. Cholesterol was effectively solubilized by all of these surfactants. Cationic surfactants were most effective. However, cholesteryl myristate was not solubilized at all. In the dissolution test of gallstones in surfactant solutions, cationic surfactant solutions were exceptionally effective in dissolving gallstones. These results suggest the possible existence of interaction between alkylammonium radical and cholesterol on micellar surface.

  • PDF

The Effects of $Mg^{2+}$ on the Micelle Formation of Nonionic Surfactants (비이온성 계면활성제의 미셀 형성에 미치는 $Mg^{2+}$의 영향)

  • Kwon, Oh-Yun;Kim, Jung-Sung;Paek, U-Hyon
    • Journal of the Korean Chemical Society
    • /
    • v.37 no.9
    • /
    • pp.781-786
    • /
    • 1993
  • In the presence of $Mg^{2+}$, the interaction of nonionic surfactants, $nonylphenol-(ethylene oxide)_n$[NP-nEO; n = 12, 40, 100] with iodine in aqueous solution were investigated by UV-visible spectrophotometer. CMC (critical micelle concentration) was decreased with increasing $Mg^{2+}$ concentration, and those effects depend upon EO (ethylene oxide) numbers. Above CMC, the intensity of interaction peaks by the addition of $Mg^{2+}$ increased and then decreased. The increase in the intensity of the interaction peaks were attributed to the compactness of micelle in the presence of $Mg^{2+}$. These phenomena may be explained by the fact that the linear ethylene oxide chains, to be free configuration in aqueous solution, could form a psuedo-crown ether structures capable of forming complex with $Mg^{2+}$.

  • PDF

Preparation and Surface-Active Properties of Vinyl Acetate Cotelomers (I) (비닐아세테이트 코텔로머의 제조 및 계면활성(I))

  • Lee, Eon-Pil;Kang, Se-Mi;Hwang, Dae-Youn;Jung, Young-Jin;Choi, Hae-Wook;Choi, Young-Ho;Lee, Jae-Ho
    • Fashion & Textile Research Journal
    • /
    • v.14 no.4
    • /
    • pp.677-683
    • /
    • 2012
  • 1-octanethiol and vinyl acetate telomers ($R_8S$-nVAc) were synthesized and hydrolyzed with sodium hydroxide subsequently, 1.2-epoxyhexane was then introduced to the telomers. In addition, we prepared cotelomers of multi-alkylated nonionic surfactants with a molecular structure of xRnMA-yVA (x; hydrophobic group, y; hydrophilic group, MA; methacrylic ester, VA; vinyl alcohol, R; and alkyl group) and cross-linked with sodium tetraborate decahydrate. Their active surface properties were investigated by several techniques such as surface tension, foaming property, and emulsification power measurements. The surface tension of $R_8S$-8.8VA decreased without the introduction of 1.2-Epoxy hexane, and the degree of emulsification and foaming abilities of $R_8S$-8.8VA increased without the introduction of 1.2-Epoxy hexane. However, the differences were insignificant. The epoxy groups were attached to a $R_8S$-8.8VA cotelomer with a limited variation of the active surface properties. The surface tension of $1.1R_6MA$-8.8VA decreased after cross-linking subsequently, the degree of emulsification and foaming abilities of $1.1R_6MA$-8.8VA increased after cross-linking. However, there was no clear difference between them. The B-O bonds were attached to a $1.1R_6MA$-8.8VA cotelomer with a limited variation of the active surface properties.

The Effect of Particle Size on the Detergency of Particulate Soil (고형오구 입자크기가 고형오구의 세척성에 미치는 영향)

  • Mun, Mi-Hwa;Kang, In-Sook
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.34 no.4
    • /
    • pp.653-662
    • /
    • 2010
  • This study investigates the effect of particle size on the detergency of particulate soil using an $\alpha-Fe_2O_3$ particle as the model. Monodispersed spherical $\alpha-Fe_2O_3$ particles were prepared by the hydrothermal aging of an acidic $FeCl_3$ and HCl solution. The $\xi$-potential of PET fiber was measured by the streaming potential method. The potential energy of interaction between the particle and fiber was calculated using the heterocoagulation theory for a sphere-plate model. The $\xi$-potential of PET fiber and potential energy of interaction between particles and fiber increased with a decreasing particle size in a DBS solution. However, in the nonionic surfactant solution, the $\xi$-potential signs of PET fiber and $\alpha-Fe_2O_3$ particles were (-) and (+), respectively; there was no repulsive power between the particles and substrate. The adhesion of particles to the fabric increased with increasing particle size in the anionic surfactant solution and their removal from the fabric increased with a decreasing particle size. The adhesion of particles to the fabric and their removal from the fabric was biphasic with a maximum and minimum at 0.1% concentration of the surfactant solution. In the nonionic surfactant solution the adhesion of particles to fabric and their removal from the fabric were greater than the ones in the anionic surfactant DBS solution.

Molecular Interactions of Soaked Nonionic Dye in Ionomer Films (아이오노머 필름에 흡수된 비이온계 염료의 분자간 상호작용에 관한 연구)

  • ;;;;;;Forrest A. Landis;Robert B. Moore
    • Polymer(Korea)
    • /
    • v.25 no.5
    • /
    • pp.671-678
    • /
    • 2001
  • Sodium and zinc salts of poly(ethyaene-co-methacrylic acid) ionomers consist of three phases, i.e. ionic aggregates, amorphous, and crystalline phases. Dye molecules after soaked from the methanol solution are located near the amorphous phase or ionic aggregates within ionomer films. Depending on the location of the molecules in the ionomer film, they are under influence of dispersion forces (ethylene parts), polar forces (acid parts). and ionic dipole (ionic aggregates) interactions. The UV/Vis absorption peak of Nile Red under the dispersion force is found at near 500 nm, for the dye under the polar force effect 525 nm, and 550 and 610 nm for the dyes under $Na^+$ and $Zn^{2+}$ ionization effects, respectively. Since the divalent $Zn^{2+}$ ion has larger ionic dipole than the monovalent $Na^+$ ion, the larger red-shift of the absorption band due to the ionic dipole interaction is observed for $Zn^{2+}$ counter ion.

  • PDF

Recent Trends in Research of Polyglycerin Fatty Acid Esters (폴리글리세린지방산에스터의 최근 연구동향(제1보))

  • Rang, Moon Jeong
    • Journal of the Korean Applied Science and Technology
    • /
    • v.36 no.4
    • /
    • pp.1443-1459
    • /
    • 2019
  • Polyglycerol fatty acid ester nonionic surfactants have been used for a long time in foods and have been suggested as an alternative to the safety problems of PEG based nonionic surfactants. The polyglycerol fatty acid ester surfactants are synthesized by combining a hydrophilic polyglycerin and a lipophilic fatty acid. The hydrophilic polyglycerin is polymerized using glycerin, glycidol, epichlorohydrin, etc. The main issues of the polyglycerol polymerization reaction are to increase the content of the polyglycerol in the form of linear rather than branched or cyclic forms and to narrow the distribution of the degree of polymerization. The method of binding a lipophilic fatty acid group to a hydrophilic polyglycerin includes chemical synthesis such as esterification reaction and enzyme synthesis using lipase enzyme. The main issues of polyglycerin fatty acid ester synthesis are to increase the yield and to control the degree of esterification while reducing side reactions.

Enzymatic Conversion of Pyruvic Acid to Tryptophan tinted to Pyruvic Acid-Producing Microorganism (Pyruvic Acid 생산 미생물과 연결된 Pyruvic Acid의 Tryptophan으로의 효소적 전환)

  • 정남현;방원기
    • Microbiology and Biotechnology Letters
    • /
    • v.15 no.5
    • /
    • pp.334-339
    • /
    • 1987
  • Enzymatic conversion of pyruvic acid produced by microorganism to tryptophan was investigated. A luminescent bacteria. Beneckea sp., was used for the production of pyruvic acid. As a source of tryptophanase which synthesizes tryptophan from pyruvic acid, indole and ammonia, whole cells of Enterobacter aerogenes ATCC 10031 were used directly in the reaction mixture. To increase the production of tryptophan, nonionic detergents and nonaqeous organic solvents were used ms reserviors of indole in the reaction mixture. In the case of nonionic detergents, TritonX-100 was very effective. When 1.5% of Triton X-100 was used, 7.7g/$\ell$ of tryptophan was produced at 37$^{\circ}C$ for 48hr. In the case of nonaqueous solvents, 8.7g/$\ell$ of tryptophan was produced at 37$^{\circ}C$ for 48 hr, when 10% of benzene was used. This amount of tryptophan corresponds to conversion of 48% of Indole and 36% of pyruvic acid, respectively.

  • PDF

Effect of Direct Emulsification Method and Invert Emulsification Method On Droplet Size of O/W Emulsion (O/W 에멀젼 입자의 크기에 미치는 Direct 유화법과 Invert유화법의 효과)

  • 김철훈;박재길
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.20 no.1
    • /
    • pp.64-81
    • /
    • 1994
  • O/W emulsions with mixed nonionic surfactants(polyoxyethylene(20)sorbitan monostearate/sorbitan sesquioleate), liquid paraffin, water prepared by direct inversion emulisification method and continuous inversion emulsification Method. The one-step, two-step and three-step phase inversion emulsification method were used in experiments. Effect of added water on droplet size of final O/W emulsions which is prepared by phase inversion emulsification method were investigated. In direct inversion emulsification method(two-step emulsification method), fine and homogeneous droplets of OIW emulsions were formed after phase inversion steps i.e. ,W/O - (W/O) If double emulsion - O/W emulsion. In continuous inversion emulsification method(three-step emulsification method), fine and homogeneous O/W emulsion were formed after phase inversion steps i.e., W/O - pseudomicroemulsion - O/W. By latter method, more Fine and homogenuous droplets were formed than former method. 10-10, 8 HLB region of mixed non-ionic surfactants could produce most fine droplets. This HLB region had maximum values of solubilization water and This HLB value of mixed nonionic surfactants produced fine and homogenuous droplets.

  • PDF

Spectrophotometric Determination of Iron with 2-Hydroxybenzaldehyde-5-nitro-pyridylhydrazone after Separation with Amberlite XAD-7 Nonionic Resin (Amberlite XAD-7 비이온성 수지로 분리 후 2-Hydroxybenzaldehyde-5-nitro-pyridylhydrazone을 이용한 철의 분광학적 정량)

  • Park, Chan Il;Chung, Byung Doo;Jung, Duck Chae;Cha, Ki Won
    • Journal of the Korean Chemical Society
    • /
    • v.43 no.5
    • /
    • pp.522-526
    • /
    • 1999
  • 2-Hydroxybenzaldehyde-5-nitro-pyridylhydrazone (2HB-5NPH) was synthesized and its application to the spectrophotometric determination of iron was studied. The reagent reacts with iron in the pH range 6.0-7.5 to form a yellow coIored 1:2 chelate which is very stable in methanol solution. Beer's law is obeyed in the concentration range 0.05∼2.0 ${\mu}gmL^{-1}$ iron and separation procedure using a short column filled with Amberlite XAD-7 nonionic chelating resin is proposed for the spectrophotometric determination of traces of iron. The influence of several ions as interference was discussed. The separation of Fe(III) ion from the mix-ture solution were carried out with the buffer solution (pH 5.0) and 0.25M HCl as eluents.

  • PDF