Molecular Interactions of Soaked Nonionic Dye in Ionomer Films

아이오노머 필름에 흡수된 비이온계 염료의 분자간 상호작용에 관한 연구

  • ;
  • ;
  • ;
  • ;
  • ;
  • ;
  • Forrest A. Landis (University of Southern Mississippi) ;
  • Robert B. Moore (University of Southern Mississippi)
  • 이상흠 (경희대학교 환경ㆍ응용화학부) ;
  • 이원선 (경희대학교 환경ㆍ응용화학부) ;
  • 이상준 (경희대학교 환경ㆍ응용화학부) ;
  • 김성수 (경희대학교 환경ㆍ응용화학부) ;
  • 김인선 ((주)아이컴포넌트) ;
  • 송기국 (경희대학교 환경ㆍ응용화학부) ;
  • ;
  • Published : 2001.09.01

Abstract

Sodium and zinc salts of poly(ethyaene-co-methacrylic acid) ionomers consist of three phases, i.e. ionic aggregates, amorphous, and crystalline phases. Dye molecules after soaked from the methanol solution are located near the amorphous phase or ionic aggregates within ionomer films. Depending on the location of the molecules in the ionomer film, they are under influence of dispersion forces (ethylene parts), polar forces (acid parts). and ionic dipole (ionic aggregates) interactions. The UV/Vis absorption peak of Nile Red under the dispersion force is found at near 500 nm, for the dye under the polar force effect 525 nm, and 550 and 610 nm for the dyes under $Na^+$ and $Zn^{2+}$ ionization effects, respectively. Since the divalent $Zn^{2+}$ ion has larger ionic dipole than the monovalent $Na^+$ ion, the larger red-shift of the absorption band due to the ionic dipole interaction is observed for $Zn^{2+}$ counter ion.

Sodium 또는 zinc로 중화된 poly(ethylene-co-methacrylic acid)의 아이오노머는 ethylene 사슬 부분들로만 이루어진 결정상, acid 그룹이 존재하는 amorphous 영역, 그리고 ionic aggregate의 세 가지 상으로 나누어진다. Soaking에 의하여 흡수된 nonionic dye 분자들은 결정상을 제외한 amorphous 부분이나 ionic aggregate 분근에 존재하는데, 주위 사슬의 극성에 따라 dispersion force (ethylene 사슬 부분), polar force (acid 부분), ionic dipole (ionic aggregate 부분)의 세 가지 다른 힘의 영향 아래 놓이게 된다. 극성이 적은 ethylene 사슬부분의 dispersion force 영향 아래에 존재하는 Nile Red의 UV/Vis 흡수피크는 500nm 부근에서, polar한 acid 그룹의 영향을 받는 dye 피크는 525 nm, 그리고 ionic aggregate의 영향에 의한 dye는 Na+-아이오노머의 경우 550 nm, divalent이어서 더 큰 ionic dipole을 가지는 $Zn^{2+}$-아이오노머의 경우 610nm에서 각각 피크가 나타났다.

Keywords

References

  1. Polym. Prepr. Am. Chem., Soc. Div. Polym. Chem. v.6 R. W. Rees;D. J. Vaughan
  2. J. Polym. Sci. v.4 A. Eisenberg;H. Farb;L. G. Cool
  3. Nature v.218 R. Longworth;D. J. Vaughan
  4. Macromolecules v.27 J. S. Kim;R. J. Jackman;A. Eisenberg
  5. Macromolecules v.23 A. Eisenberg;B. Hird;R. B. Moore
  6. Advances in Chemistry Series 187;Am. Chem. Soc. Ions in Polymers A. Eisenberg(ed.)
  7. ACS Symposium Series 302;Am. Chem. Soc. A. Eisenberg(ed.);F. Bailey(ed.)
  8. Org. Chem. v.48 G. A. Olah;K. Laali;A. K. J. Mehrotra
  9. Polym. Prepr., Am. Chem. Soc., Polym. Chem. v.35 no.2 E. N. Drake
  10. Angew. Macromol. Chem. v.19 B. Vollmert;W. Schoene
  11. Chem. Rev. v.90 P. J. Phillips
  12. Macromolecules v.28 Y. Drix;T. A. Tervoort;C. Bastiansen
  13. Macromolecules v.30 Y. Drix;T. A. Tervoort;C. Bastiansen
  14. Polymer v.34 C. Bastiaansen;H. Schnidt;T. Nishino;P. Smith
  15. Macromolecules v.3 A. Eisenberg
  16. J. Appl. Polym. Sci. v.33 Y. Tsujita;K. Shibayama;A. Takizawa;T. Kinoshita
  17. J. Phys. Chem., B v.101 A. Datta;D. Mandal;S. Kumar;K. Bhattacharyya
  18. Langmuir v.10 N. Sarkar;K. Das;D. Narayan;K. Bhattacharyya