• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제9권3호
• /
• pp.206-212
• /
• 2009

This paper presents an optimized integrated task planning and control approach for manipulating a nonholonomic robot by mobile manipulators. Then, we derive a kinematics model and a mobility of the mobile manipulator(M2) platform considering it as the combined system of the manipulator and the mobile robot. to improve task execution efficiency utilizing the redundancy, optimal trajectory of the mobile manipulator(M2) platform are maintained while it is moving to a new task point. A cost function for optimality can be defined as a combination of the square errors of the desired and actual configurations of the mobile robot and of the task robot. In the combination of the two square errors, a newly defined mobility of a mobile robot is utilized as a weighting index. With the aid of the gradient method, the cost function is minimized, so the path trajectory that the M2 platform generates is optimized. The simulation results of the 2 ink planar nonholonomic M2 platform are given to show the effectiveness of the proposed algorithm.

• Transactions on Control, Automation and Systems Engineering
• /
• 제2권3호
• /
• pp.201-206
• /
• 2000

In this paper, a posture control for nonholonomic mobile robots is proposed with an empirical basis. In order to obtain fast and consecutive motions in realistic applications, the motion requirements of a mobile robot are defined. Under the assumption of a velocity controller designed with the selection guidance of control parameters, the algorithm of posture control is presented and experimentally demonstrated for practicality and effectiveness.

• 제어로봇시스템학회논문지
• /
• 제9권6호
• /
• pp.466-472
• /
• 2003

This paper describes a tracking control for the mobile robot based on fuzzy systems. Since the mobile robot has the nonholonomic constraints, these constraints should be considered to design a tracking controller for the mobile robot. One of the well-known tracking controllers for the mobile robot is the back-stepping controller. The conventional back-stepping controller includes the dynamics and kinematics of the mobile robot. The conventional back-stepping controller is affected by the derived velocity reference by a kinematic controller. To improve the performance of the conventional back-stepping controller, this paper uses the fuzzy systems known as the nonlinear controller. The new velocity reference for the back-stepping controller is derived through the fuzzy inference. Fuzzy rules are selected for gains of the kinematic controller. The produced velocity reference has properly considered the varying reference trajectories. Simulation results show that the proposed controller is more robust than the conventional back-stepping controller.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.169-170
• /
• 2008

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.15-18
• /
• 2003

This paper presents an adaptive control scheme for parking or regulating a nonholonomic mobile robot of an unicycle type with parameter uncertainty. The kinematics can be described with Brockett's nonholonomic integrator. The control law is designed in cylindrical coordinates together with the estimation law for the uncertain parameters such that the controlled signals converge to zero while guaranteeing the boundedness of the estimation errors. The effectiveness of the proposed scheme is demonstrated using simulations.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권12호
• /
• pp.583-595
• /
• 2002

Homing operation can be defined as a series of actions which are necessary for a mobile robot to move from the current position with any arbitrary orientation to a desired position with a specified orientation, while avoiding possible obstacles. In this paper, a homing and obstacle avoidance algorithm for nonholonomic mobile robots is proposed. The proposed algorithm consists of a local goal generator, a discrete state controller, and local path tracking controller based on Aicardi's path following algorithm. In the discrete state controller, 4 states are defined according to the environmental conditions and 4 desired high-level command for the states are given as follows: avoid, wander, home and homing zones. The proposed local goal generator is designed to generate the desired local path by using weighted distance transforms which are newly made to satisfy the nonholonomic constraints of mobile robots. Here, subgoals are also found as vertices of the desired local path. To demonstrate result effectiveness and applicability of the proposed algorithm, computer simulations are illustrated and experimental results for a real mobile robot system are also provided.

• 제어로봇시스템학회논문지
• /
• 제16권8호
• /
• pp.771-779
• /
• 2010

This paper presents a method that integrates the geometric path tracking and the obstacle avoidance for nonholonomic mobile robot. The mobile robot follows the path by moving through the turning radius given from the pure pursuit method which is the one of the geometric path tracking methods. And the obstacle generates the obstacle potential, from this potential, the virtual force is obtained. Therefore, the turning radius for avoiding the obstacle is calculated by proportional to the virtual force. By integrating the turning radius for avoiding the obstacle and the turning radius for following the path, the mobile robot follows the path and avoids the obstacle simultaneously. The effectiveness of the proposed method is verified through the real experiments for path tracking only, static obstacle avoidance, dynamic obstacle avoidance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1172-1177
• /
• 2003

In this paper, we propose an obstacle avoidance technique in trajectory tracking of nonholonomic wheeled mobile robots. Input-output linearized backstepping controller is used in trajectory tracking, and repulsive type control input for obstacle avoidance is added to it. The added input is generated by fuzzy logic. And we do not add the two inputs directly but combine them via fuzzy logic, which determines the ratings of each input. Some simulations are performed to show that with the proposed algorithm, the mobile robot can track its reference trajectory even if there are multiple obstacles on the trajectory of robot.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.923-928
• /
• 2003

This paper presents the motion control of a mobile robot with arc sensor for lattice type welding. Its dynamic equation and motion control method for welding speed and seam tracking are described. The motion control is realized in the view of keeping constant welding speed and precise target line even though the robot is driven along a straight line or comer. The mobile robot is modeled based on Lagrange equation under nonholonomic constraints and the model is represented in state space form. The motion control of the mobile robot is separated into three driving motions of straight locomotion, turning locomotion and torch slider controls. For the torch slider control, the proportional integral derivative (PID) control method is used. For the straight locomotion, a concept of decoupling method between input and output is adopted and for the turning locomotion, the turning speed is controlled according to the angular velocity value at each point of the comer with range of $90^{\circ}$ constrained to the welding speed. The proposed control methods are proved through simulation results and the results have proved that the mobile robot has enough ability to apply the lattice type welding line.

• Journal of Mechanical Science and Technology
• /
• 제16권1호
• /
• pp.83-93
• /
• 2002

This paper presents a motion control method and its simulation results of a mobile robot for a lattice type welding. Its dynamic equation and motion control methods for welding speed and seam tracking are described. The motion control is realized in the view of keeping constant welding speed and precise target line even though the robot is driven for following straight line or curve. The mobile robot is modeled based on Lagrange equation under nonholonomic constraints and the model is represented in state space form. The motion control of the mobile robot is separated into three driving motions of straight locomotion, turning locomotion and torch slider control. For the torch slider control, the proportional-integral-derivative (PID) control method is used. For the straight locomotion, a concept of decoupling method between input and output is adopted and for the turning locomotion, the turning speed is controlled according to the angular velocity value at each point of the corner with range of 90$^{\circ}$ constrained to the welding speed. The proposed control methods are proved through simulation results and these results have proved that the mobile robot has enough ability to apply the lattice type welding line.