• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.27-30
• /
• 2008

For the purpose of developing economical and time-efficient formwork for Top-down construction, a Non-Supporting Form System has been proposed. The system is consisted of two parts: a hanging part to support a steel frame and a section of concrete slab, and the other hanging part to lower the steel frame. In this paper, the proposed system is compared to two existing systems of Non Supporting Top-down Method and Bracket Supported R/C Downward Method. It is expected that this system can be used in Top-down construction with further development.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.952-956
• /
• 1995

It is known that the 3D Solid CAD system can provide various information which is useful for implementing CAPP and CAE. However the commercial 3D CAD systems available today do not support the handling of non-geometric information such as geometry tolerance and surface finish. It is impossible to input the non-geometric information during designof parts while CAPP needs the information for selecting machine tools. fiztures, inspection method, etc. In this paper the need of research on handling tolerance information In 3D CAD systems is considered. The development of inspection planning support system is also explained with an example. The development of inspection planning support systm receives the design geometry information from the 3D CAD system in the form of 2D draft and generates the inspection data base and the inspection sheet through the user interaction.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1955-1959
• /
• 2005

This paper presents a systematic analysis and a simple design of a robust adaptive control law for a class of non linear systems with modeling errors and a time-delay input. The theory for designing a robust adaptive control law based on input- output feedback linearization of non linear systems with uncertainties and a time-delay in the manipulated input by the approach of parameterized state feedback control is presented. The main advantage of this method is that the parameterized state feedback control law can effectively suppress the effect of the most parts of nonlinearities, including system uncertainties and time-delay input in the pp-coupling perturbation form and the relative order of non linear systems is not limited.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.3
• /
• pp.373-383
• /
• 2006

In a steel structural system, noncomposite form deck one-way slab is the plate element supported by four-edged steel beams with unequaled stiffness. However, design criterion has analyzed the one-way slab as the continuous beam. Because the end beams that support the one-way slab have elastic supports t hat cause different deflections according to the support conditions and locations, the bending moments corresponding to the support ic support effect is not considered in the design criterion. Accordingly, to conduct a reasonable estimation of approximate moment coefficients considering the unequaled elastic support conditions, this study analyzes and estimates various models with varia bles for the ratios of live load to dead load and pattern arangements of live loads and span lengths. The analytical methods considering the finite three-dimensional plate element, the two-dimensional elastic support and the infinite stifnes suport are performed.

• KIEAE Journal
• /
• v.8 no.2
• /
• pp.87-92
• /
• 2008

Underground building constructions are recently more important because the ratio of underground area is increasing in the huge and high-rise building construction projects. For reducing the total building construction periods, it is required to reduce not only the over-ground structural work periods but also the underground structural work periods. Therefore, this study is proposed the non-supporting system forms for single face walls in underground building construction by one of the methods for reducing the underground structural work periods and investigated the applicability of the non-supporting system forms by analyzing the case-study in civil construction project. In regard of construction duration, the results of analyzing the case-study showed that the non-supporting system forms are better than the euro forms with soldier system for single face walls in underground building construction. In addition, it is showed that the cost of these two forms is similar and usage the working space and safety in non-supporting system forms are better that those of the euro forms with soldier system, too.

• Bulletin of the Korean Mathematical Society
• /
• v.46 no.4
• /
• pp.743-769
• /
• 2009

An ID-based DNF signature scheme is an ID-based signature scheme with an access structure which is expressed as a disjunctive normal form (DNF) with literals of signer identities. ID-based DNF signature schemes are useful to achieve not only signer-privacy but also a multi-user access control. In this paper, we formally define a notion of a (non-interactive) ID-based DNF signature and propose the first noninteractive ID-based DNF signature schemes that are secure under the computational Diffie-Hellman and subgroup decision assumptions. Our first scheme uses random oracles, and our second one is designed without random oracles. To construct the second one, we use a novel technique that converts a non-interactive witness indistinguishable proof system of encryption of one bit into a corresponding proof system of encryption of a bit-string. This technique may be of independent interest. The second scheme straightforwardly yields the first ID-based ring signature that achieves anonymity against full key exposure without random oracles. We finally present two extensions of the proposed ID-based DNF signature schemes to support multiple KGCs and different messages.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.123-126
• /
• 2006

Existing Deck Plate for a one of system forms, there is various advantage and application actual results increasing rapidly. But design of deck is depending on engineering data collections or design data on deck manufacture ordinarily. When construct, is responsible for deflection occurrence, And Because confirmation of crack occurrence region is impossible, there is difficulty of repair, reinforcement about crack and water leakage. According to got following conclusion as result that economic performance, preservation administration and repair reinforcement develops easy using steel truss snap tie by wedge pin on coating plywood that is slab Panel Wood System Form method of construction there is Deck Plate's advantage. (1) In stab lower part is exposed disjointing in which a criminal is fastened to be interrogated after construction acceptance and repair, reinforcement of crack is possible (2) Construction cost curtailment effect of about 29.2% than conventional type and about 10% than deck plate (3) Construction period reduction of about 3 day than conventional type and about 0.3 day than deck plate (4) Labor curtailment effect more than about $29{\sim}50%$ from conventional type

• Korean Journal of Computational Design and Engineering
• /
• v.1 no.2
• /
• pp.133-149
• /
• 1996

In order to reduce the trial-and-errors in design and production of injection molded plastic parts, there has been much research effort not only on CAE systems which simulate the injection molding process, but also on CAD systems which support initial design and re-design of plastic parts and their molds. The CAD systems and CAE systems have been developed independently with being built on different basis. That is, CAD systems manipulate the part shapes and the design features in a complete solid model, while CAE systems work on shell meshes generated on the abstract sheet model or medial surface of the part. Therefore, it is required to support the two types of geometric models and feature information in one environment to integrate CAD and CAE systems for accelerating the design speed. A feature-based non-manifold geometric modeling system has been developed to provide an integrated environment for design and analysis of injection molding products. In this system, the geometric models for CAD and CAE systems are represented by a non-manifold boundary representation and they are merged into a single geometric model. The suitable form of geometric model for any application can be extracted from this model. In addition, the feature deletion and interaction problem of the feature-based design system has been solved clearly by introducing the non-manifold Boolean operation based on 'merge and selection' algorithm. The sheet modeling capabilities were also developed for easy modeling of thin plastic parts.

• International Journal of Computer Science & Network Security
• /
• v.23 no.6
• /
• pp.49-58
• /
• 2023

Renewable energy is not a new terminology. One of the fastest growing renewable energies is solar energy. The implementation of solar energy provides several advantages including the reduction of some of the environmental risks of fossil fuel consumption. This research elaborated the importance of the adaption of solar energy by developing a spatial decision support system (SDSS), while the Residential Solar Energy Adoption (RSEA) is an instantiation artifact in the form of an SDSS. As a GIS web-based application, RSEA allows stakeholders (e.g., utility companies, policymakers, service providers homeowners, and researchers) to navigate through locations on a map interactively. The maps highlight locations with high and low solar energy adoption potential that enables decision-makers (e.g., policymakers, solar firms, utility companies, and nonprofit organizations) to make decisions. A combined qualitative and quantitative methodological approach was used to evaluate the application's usability and user experience, and results affirmed the ability of the factors of utility, usefulness, and a positive user experience of the residential solar energy adoption of spatial decision support system (RSEA-SDSS). RSEA-SDSS in improving the decision-making process for potential various stakeholders, in utility, solar installations, policy making, and non-profit renewable energy domains.

• Korean Journal of Computational Design and Engineering
• /
• v.1 no.1
• /
• pp.20-32
• /
• 1996

The boundary evaluation technique for Boolean operation on non-manifold models which is regarded as the most popular and powerful method to create and modify 3-D CAD models has been developed. This technique adopted the concept of Merge and Selection in which the CSG tree for Boolean operation can be edited quickly and easily. In this method, the merged set which contains complete information about primitive models involved is created by merging primitives one by one, then the alive entities are selected following the given CSG tree. This technique can support the hybrid representation of B-rep(Boundary Representation) and CSG(Constructive Solid Geometry) tree in a unified non-manifold model data structure, and expected to be used as a basic method for many modeling problems such as data representation of form features, and the interference between them, and data representation of conceptual models in design process, etc.