• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.420-423
• /
• 2015

이진가중치 전하재분배 DAC는 커패시터를 기반으로 구동하고 커패시터 값에 따라서 데이터 변환을 시킨다. 전하재분배 DAC의 성능을 결정하는 가장 중요한 요소는 정확한 커패시터와 트랜지스터 소자들의 크기와 특성의 보장이다. 그러나 고해상도의 DAC에서는 회로의 레이아웃 설계시의 mismatch와 칩의 공정변화에 의해 다양한 기생소자 성분 발생과 소자특성의 변화를 피하기는 매우 어렵다. 이러한 소자 mismatch는 DAC 각 비트의 해당 아날로그 값에 비선형 오차를 발생시켜 SNDR 성능저하를 가져오게 된다. 본 논문에서는 커패시터 mismatch에 의한 DAC의 데이터 오차를 감지하고 이를 보상하는 방법을 제안한다. 제안된 방법은 2개의 동일한 DAC를 사용한다. 2개의 DAC는 고정된 차이를 가진 2개의 디지털 입력을 사용함으로써 각각 데이터가 변환된다. 비교기는 허용되는 차이 보다 큰 비선형 오차를 찾을 수 있다. 우리가 제안하는 보정 방법은 비교기가 오차를 제거 할 때 까지 DAC의 커패시터 사이즈를 바꾸면서 미세한 조정을 할 수 있다. 시뮬레이션은 12bit 이진가중치 전하재분배 디지털-아날로그 변환기의 커패시터 mismatch 보정과 비선형 오차를 효과적으로 감지하는 방법을 나타낸다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권6호
• /
• pp.313-316
• /
• 2006

A method for evaluation of the linearity of both the ratio error and phase angle error in the current transformer(CT) comparison measurement equipment has been developed by employing the standard resistors with negligible AC-DC resistance difference less than $10^{-5}$. The non-reactive standard resistors for the linearity check of the system are used as the external burden connected with the secondary of CT under test. These burdens consist of nine standard resistors, with the nominal resistance of $0.01{\Omega},\;0.1{\Omega},\;0.2{\Omega},\;0.4{\Omega},\;0.6{\Omega},\;1{\Omega},\;2{\Omega},\;4{\Omega}$, and $10{\Omega}$. For linearity check, the developed method has been applied in the CT comparison measurement equipment belonging to the industry.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집(한일합동학술편); 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.847-850
• /
• 1987

In this paper a new method to correct the differential non-linearity(D NL) error for a successive approximation is proposed. The DNL of ADC is very important characteristic in the field of radiation pulse height analysis or measurement of probability density function. The results of computer simulations are shown to demonstrate the feasibility of the proposed correction method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1862-1863
• /
• 2007

Testing the analog/mixed-signal circuitry of a mixed-signal IC has become a difficult task. Offset error, gain error, Non-monotonic behavior, Differential Non-linearity(DNL) error, Integral Non-linearity(INL) error are important specifications used as test parameters for DAC. In this paper, we propose an efficient BIST structure for DAC testing. The proposed BIST adds the circuit which uses the capacitor and op-amp, and accomplishes a test.

• 전기학회논문지
• /
• 제56권5호
• /
• pp.926-932
• /
• 2007

A recently developed methods for on-site calibration of the current transformer (CT) comparator system have been reviewed in the paper. The method utilizes several traveling standards, which consist of the CT, non-reactive standard resistors, wide ratio error CT, and shunt resistors. The traveling CT is used for absolute evaluation of a standard CT belonging to industry. The non-reactive standard resistors and a wide ratio error CT are used for the linearity check of errors in the current comparator. The shunt resistors are used for evaluation of CT burden of industry.

• 전기학회논문지
• /
• 제56권7호
• /
• pp.1268-1274
• /
• 2007

A recently developed methods for the on-site calibration of the voltage transformer (VT) comparator system have been reviewed in the paper. The method utilizes the several traveling standards consisting of the VT, the non-reactive standard resistors, the wide ratio error VT, and the decade resistors. The VT is used for the absolute evaluation of a standard VT belonging to the industry. The non-reactive standard resistor and wide ratio error VT are used for the linearity check of errors in the voltage comparator of the industry. The decade resistors are used for evaluation of a VT burden of the industry.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.443-447
• /
• 1999

The AC drive systems of a voltage source inverter and an induction motor. The inverter non linearity caused by the turn on/off time dependency of the current level in the switching IGBT is described in the first part of this paper. To improve the low-speed drive characteristics, accurate applied voltage calculation is proposed under considerations of the compensations for the quantization error in the digital controller, the forward voltage drop of switching drives and the dead time of the inverter. The experimental studies show the improved drive characteristics.

• 한국통신학회논문지
• /
• 제32권7A호
• /
• pp.738-745
• /
• 2007

본 논문에서는 비선형 특성을 갖는 고출력 증폭기(high power amplifier : HPA) 및 I/Q 진폭/위상 불균형과 위상 오류를 갖는 비이상적인 수신기가 고려된 APSK 뿐만 아니라 임의의 2차원 신호를 갖는 변조방식에 대한 오류 확률 표현을 유도하고, 그 표현의 수치적 결과로부터 비선형 특성 및 비 이상적인 특성이 오류 확률에 미치는 영향을 분석한다. HPA의 모델로는 가장 많이 사용되는 Saleh 모델을 적용하며, 한 신호점에서의 오류 확률 분석을 2차원 결합 가우시안 Q함수(2-dimensional joint Gaussian Q-function)의 표현으로 간편히 할 수 있는 방법을 통하여 정확한 오류 확률의 유도 및 분석을 수행한다.

• 천문학회지
• /
• 제21권2호
• /
• pp.155-171
• /
• 1988

We have examined how sensitively the extinction value determined by the method of star-count depends on such factors as the plate limit, the size of counting reseau, the non-linearity in the number distribution of stars with magnitude, and the angular resolution demanded by the given problem. We let the Poisson distribution portray the statistical nature of the countings, and chose the region containing the globule Barnard 361 as an example field. Uncertainties due to various combinations of the factors are presented in graphic forms: (1) Dynamic range in the extinction measurements is evaluated as a function of reseau size for varying plate limits. (2) Statistical errors involved in the star-count are analized in terms of the signal-to-noise ratio, the plate limit and the reseau size. (3) Systematic error due to the non-linearity in the number distribution are thoroughly analized. (4) Finally, a methodology is presented for correcting the systematic error in the observed radial density gradient. These graphs are meant to be used in selecting proper size of the reseau and in estimating errors inherent to the star-count analysis.

• 센서학회지
• /
• 제26권2호
• /
• pp.114-121
• /
• 2017

This paper describes the design and fabrication of a three-axis force sensor with parallel plate beams (PPSs) for measuring the calf force while a patient with a walking assist robot is walking. Current walking assist robots can't measure the weight of the patient's leg and the robot's leg which required for robot control. So, the three-axis force sensor in the calf link is designed and manufactured, it is composed of a Fx force sensor, a Fy force sensor and a Fz force sensor. The three-axis force sensor was designed using by FEM(Finite Element Method), and fabricated using strain-gages. The characteristics experiment of the three-axis force sensor was carried out respectively. The test results indicated that the repeatability error and the non-linearity error of three-axis force sensor was less than 0.04% respectively. Therefore, the fabricated three-axis force sensor in the calf link can be used to measure the patient's calf force in the walking assist robot.