• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.2
• /
• pp.34-41
• /
• 2015

Recovered paper has been widely used as a main raw material of papermaking in Korea. Recycling of recovered paper helps to reduce production cost and preserve an environment. To recycle recovered paper efficiently, de-inking is a key process in recycling mills. De-inking process would be affected by various influencing factors such as the type of de-inking agent, mixed ratio of recovered paper, season, and process conditions. In this study, fatty acid and nonionic surfactant were used as the de-inking agent in froth-flotation process of mixed recovered paper. De-inking properties of mixed recovered paper were investigated according to the addition level of each chemical. Nonionic surfactant had a small effect on de-inking efficiency of mixed recovered paper due to decreased reject. As the additional level of fatty acid increases, fragmented ink particles increased and then optical properties of recycled paper decreased because fragmented ink particles adsorbed onto the fiber surface.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.417-421
• /
• 2003

Three kinds of surfactant systems - cationic surfactant (system 1), combinition of two cationic surfactants (system 2), and combination of two cationic surfactant and non-ionic surfactant (system 3) - for the simultaneous removal of nitrate and phosphate by micellar-enhanced ultrafiltration (MEUF) were investigated. The highest removal efficiencies of nitrate and phosphate were observed in system 2, which were 90 % of nitrate and 72 % of phosphate. The COD of permeate in system 3 was the lowest, because the added non-ionic surfactant made critical micelle concentration (CMC) lower than that of other surfactant systems. In all systems, the flux decline was similar.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.19-24
• /
• 2020

In this study, the O/W emulsions prepared from coconut oil and the non-ionic mixed surfactant as Tween-Span system were evaluated and optimized in order to upgrade the stability of manufactured emulsions. For the optimization, a central composite design model-response surface methodology, so called as CCD-RSM was implemented. Quantitative factors were the hydrophile-lipophilie balance (HLB), amount of non-ionic mixed surfactant and emulsification speed while experimental results included the mean droplet size (MDS), emulsion stability index (ESI), and thermal instability index (TII). Optimized values of the HLB, amount of non-ionic mixed surfactant and emulsification speed obtained from CCD-RSM were 9.1, 8.7 wt.%, and 6,200.8 rpm, respectively. Expected experimental results for MDS, ESI, and TII under the optimized experimental condition were 151.0 nm, 99.86, and 3.17%, respectively. The average error from actual experiments which established for validation of the conclusions was lower than 3.5%. Therefore, a highly favorable level could be obtained when the optimized CCD-RSM was applied to manufacturing the O/W emulsion in this study.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.88-95
• /
• 2015

The main sources of recovered paper for newsprint are old newsprint (ONP) and old magazine (OMG). Recently, a lot of advertisement flyers are flowing into bales of ONP and portion of OMG is increasing in recovered paper because the consumption level of coated paper increases. In this study, nonionic surfactant and fatty acid were used as the de-inking agent for froth-flotation process of mixed recovered paper to investigate the effect of increased mixing ratio of OMG. De-inking efficiency of nonionic surfactant decreased as the mixing ratio of OMG increased; ink removal efficiency of froth-flotation is poor, however, the reject ratio increases due to ash from OMG. In comparison with nonionic surfactant, the ash from OMG had a little effect on reject ratio and optical properties of fatty acid applied flotation accept. If nonionic surfactant and fatty acid are added to pulper and flotation cell sequentially, excessive ash from OMG may not give an adverse effect on de-inking efficiency of mixed recovered paper.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.5
• /
• pp.680-688
• /
• 2004

A sequencing batch reactor (SBR) was operated to investigate the degradation and removal of non-ionic surfactant, nonylphenol ethoxylates (NPEOs) in wastewater using lab scale experimental apparatus. About 5mg/L of NPEO was introduced and only < 0.1mg/L of NPEOs and nonylphenol(NP) in total was detected in treated effluent. In the effluent, long chain ethoxylates (NPEO12-15) were not detected, but short chain ethoxylates (NPEO1,2) were in relatively high concentration. NPEOs in the mixed liquor disappeared more rapidly in anaerobic condition than in aerobic condition.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.606-614
• /
• 2019

A mixing ratio of the oil in water (O/W) emulsion of palm oil and the non-ionic surfactant (Tween-Span type) possessing different hydrophile-lipophilie balance (HLB) values was evaluated in this work. An optimum condition was determined through analysis of main and interaction effects of each quantitative factor using central composite design model-response surface methodology (CCD-RSM). Quantitative factors used by CCD-RSM were an emulsification time, emulsification speed, HLB value and amount of surfactant. On the other hand, the reaction parameters were the viscosity and mean droplet size of O/W emersion. Optimized conditions obtained from CCD-RSM were the emulsification time of 12.7 min, emulsification speed of 5,551 rpm, HLB value of 8.0 and amount of surfactant of 5.7 wt.%. Ideal experimental results under the optimized experimental condition were the viscosity of 1,551 cP and mean droplet size of 432 nm which satisfy the targeted values. The average error value from our actual experiment for verifying the conclusions was below to 2.5%. Therefore, a high favorable level could be obtained when the CCD-RSM was applied to the optimized palm oil to water emulsification.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.4
• /
• pp.31-37
• /
• 2011

The feasibility study of soil flushing was investigated to remediate lubricant oil and zinc contaminated railway soil. In this study, mixed washing agents of surfactant and inorganic acid/base were used for the simultaneous removal. The mixed washing agent of non-ionic surfactant and HCl removed 15% of the lubricant oil and 40% of zinc, respectively. Alkaline-enhanced soil washing process increased the removal of lubricant oil up to 40%. This is because alkaline solution reduced the interfacial tension between water phase and lubricant oil phase due to the soap formation reaction. To simulate in-situ soil flushing for the remediation of railroad-related contamination, two dimensional soil flushing was carried out based on the results of batch soil washing. In the soil flushing, the removal efficiencies of lubricant oil and zinc were 34% and 16%, respectively. Even though the removal efficiency was low, the mixed washing agent can remove metal and lubricant oil simultaneously.

• Journal of Life Science
• /
• v.18 no.4
• /
• pp.515-521
• /
• 2008

This experiment was conducted to investigate effects of non-ionic or zwitterionic (+/-) surfactants on digestibility of rice straw, and changes of growth of rumen mixed microbes, pH, and gas production during in vitro fermentation. Also, during in vitro ruminal fermentation, microbial attachment on rice straw was investigated using scanning electron microscopy (SEM). Tween 80 or SOLFA-850 for non-ionic surfactant (NIS), and 3-(Dodecyldimethylammonio) propanesulfanate (DDAP) for zwitterionic surfactant (ZIS) was supplemented by 0.05% and 0.1% in Dehority's artificial medium containing Holtein rumen fluid, respectively, and the substrate for fermentation was rice straw passed through 1 mm screen. The experiment was composed of 7 treatments (two levels of two NISs, two levels of a ZIS) including the control, and 6, 12, 24, 48 and 72 hr of fermentation time with 3 replications per treatment. Treatment of Tween 80 increased in vitro DM digestibilities during 48 hr and 72 h post fermentations compared to the other treatments, whereas treatment of DDAP as a ZIS resulted in decreased DM digestibility than that of the control from 24 hr post fermentation (P<0.05). Gas production in vitro was greater (P<0.05) with addition of NIS than the control or ZIS, and increased as fermentation time elapsed. Rumen mixed microbial growth was greatest with addition of Tween 80 as NIS, and lowest when DDAP as ZIS was supplemented to the fermentation tube (P<0.05). In SEM observation, rumen microbial population attached on rice straw particle was greater with addition of NIS, but was less with addition ZIS compared with the control. In conclusion we could not found any positive effects of ZIS surfactants on rumunal fermentation characteristics and rumen microbial growth rates.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1145-1152
• /
• 2013

The rate constant of alkaline fading of methyl green ($ME^{2+}$) was measured in the presence of non ionic (TX-100), cationic (DTAB) and anionic (SDS) surfactants. $ME^{2+}$ hydrolyses and fades in neutral water and in this work we search the effects of surfactants on its fading rate. The rate of reaction showed remarkable dependence on the electrical charge of the used surfactants. It was observed that the reaction rate constant decreased in the presence of DTAB and SDS and increased in the presence of TX-100. Binding constants of $ME^{2+}$ to TX-100, DTAB and SDS and the related thermodynamic parameters were obtained by classical (or stoichiometric) model. The results show that binding of $ME^{2+}$ to TX-100 and DTAB are two-region and that of SDS is three-region. Also, the binding constants of $ME^{2+}$ to surfactant molecules in DTAB/TX-100 and SDS/TX-100 mixed solutions and their stoichiometric ratios were obtained.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.6
• /
• pp.670-677
• /
• 2007

The stability of CGAs(colloidal gas aphrons) prepared from non-ionic and ionic surfactants was investigated. Those surfactants were sodium dodecyl sulfate(SDS), Triton X-100, Tween 80 and Quillaja Saponin. The stability of CGAs prepared from single surfactants or mixed surfactants(two components) using a CGA generate. was investigated as functions of temperature, surfactant concentration and stirring time. Saponin among the single surfactants has shown the longest duration time(143 min) and then, Triton X-100, SDS, and Tween 80 were followed by at room temperature. In case of CGAs heated up to $70^{\circ}C$, SDS endured for 116 min but Saponin lasted for only 105 mit which was a considerable reduction of the duration time of CGAs at room temperature. For mixed surfactant pairs, stability of any one pairs stood between the two. That meant no synergic effect for surfactant blending. At the higher temperature, Saponin+Triton X-100 was disclosed to be the lowest, 53 min meanwhile Saponin+SDS was the highest at ambient temperature. The CGAs, initially about 140 ${\mu}m$ in diameter, began to grow right after the agitation to be about 190 ${\mu}m$ owing to coalescence of the bubbles and then became to collapse. When heated, CGAs including Saponin tended to be smaller while the others to be larger. In summary, we found that the stability of CGAs or the duration time was greater for single surfactants and at room temperature rather than for mixed surfactants that caused substantial intermolecular interactions in the CGA structure and at the higher temperature.