• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.4
• /
• pp.50-56
• /
• 2012

Rotor system is a very important part which produce lift, thrust and control force in helicopter. Component of rotor system must have structural integrity for applied load. The estimation of structural integrity is regarded greatly as important in aerospace field. In this study, the process of structural analysis performed for bearingless main rotor system of helicopter. The composite flexbeam and torque tube of bearingless main rotor are very thick, so 3D layered soild elements of MSC.PATRAN were used to get the finite element analysis results. To estimate structural integrity, non-linear static analysis considering geometric non-linearity is performed. In addition, detailed finete element analysis and non-linear static analysis are performed to consider the stress concentration for fitting effect and contact surface. The estimation process of structural integrity for bearingless main rotor system of helicopter may help the design.

• Journal of Veterinary Clinics
• /
• v.21 no.4
• /
• pp.363-368
• /
• 2004

To investigate the effects of seeding during freezing procedure on post-thaw viability, motility, and acrosome integrity of boar spermatozoa, semen from 5 Yorkshire boars were collected for this experiment. Raw semen were diluted with Merck I, subsequently added with cooling diluent containing lactose and egg yolk and with freezing diluent containing glycerol. The diluted semen were frozen on the rack in the styrofoam box filled with liquid nitrogen at the distance of 5 cm or I cm above LN2 level. Seeding was performed to only a group of straws frozen at 5 cm away on the surface of LN2. The frozen semen were thawed in $50^{\circ}C$C water and the viability and local motility were analyzed by sperm analysis imaging system. A part of thawed semen was taken for the examination of morphology of apical ridge of the acrosome to compare with the effect of seeding between the seeding-treated and non treated groups. I. Post-thaw viability was considerably higher in seeding-treated sperm than non-seeding group (p<0.01), however, no difference of local motility was obtained among the groups. 2. At three hours after thawing, viability was also higher in seeding-treated group than non-treated group (p<0.05), along with no difference of motility among the groups. 3. Higher normal acrosome integrity was obtained in the seeding-treated sperm than non-treated groups (p<0.01). 4. Between non-seeded groups, higher normal acrosome integrity was obtained in the sperm group frozen at 5cm upper on the surface of LN2 than that frozen at 1cm away (p<0.01). These results indicated that seeding treatment during freezing boar spermatozoa was beneficial to post-thaw viability and normal acrosome integrity.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.1
• /
• pp.48-53
• /
• 2016

An EMAT can be used to reliably detect defects as it serves as a non-contact transducer with the ability to transmit ultrasonic waves into specimens without couplant. Moreover, an EMAT can easily generate desired waves by altering the design of the coil and magnet. This study proposes an SH-EMAT to evaluate the integrity of the TIG welding part. A stainless steel was welded using the TIG welding method. The welding current was varied to create artificial defects. Both the PA-UT and the RT were applied to verify the defect size. The experimental results generated by using the EMAT were compared with those methods. The amplitude was observed to decrease with an increase in the defect size. These results confirmed that the presence of defects can be reliably detected by attenuation of signal amplitude. The results demonstrated that the proposed method is suitable for evaluating the integrity of TIG welding.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.10
• /
• pp.1424-1428
• /
• 2003

Present investigation was conducted to determine the post-thaw sperm motility and acrosomal damage of filtered and non-filtered frozen semen of Murrah buffalo bulls. Twenty semen ejaculates (from four Murrah buffalo bulls collected at weekly interval) were diluted in Tris egg yolk glycerol extender and divided into two parts. One was filtered through sephadex G-100 column and the other portion was kept as such (non-filtered). Both fractions were frozen in liquid nitrogen ($-196^{\circ}C$) by the standard method developed in the laboratory. After 24 h of freezing, non-filtered and filtered semen samples were thawed at $37^{\circ}C$ for 1 min. These samples were incubated at $37^{\circ}C$ in a water both. The different seminal characteristics i.e. percent progressive sperm motility, live and abnormal spermatozoa and spermatozoa with damaged acrosome were assessed at hourly interval till they remained motile. The filtered frozen and thawed semen showed significantly (p<0.05) high sperm viability and acrosomal integrity as compared to non-filtered semen.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.7 s.349
• /
• pp.20-28
• /
• 2006

A new TWA(Traveling-wave-based Waveform Approximation)-based signal integrity verification method for practical interconnect layout structures which are composed of non-uniform RLC lines with various discontinuities is presented. Transforming the non-uniform lines into virtual uniform lines, signal integrity of the practical layout structures can be very efficiently estimated by using the TWA-technique. It is shown that the proposed technique can estimate the signal integrity much more efficiently than generic SPICE circuit model with 5% timing error and 10% crosstalk error.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.4
• /
• pp.436-440
• /
• 2017

This study evaluated the design and structural integrity of a three-axle bogie frame in a railway freight car through a numerical analysis and an experimental evaluation. A three-axle bogie frame, which supports the weight of the car body and load, is required to transport heavier cargo because two-axle vehicles have structural limitations. Therefore, this study performed a structural analysis and static load tests to evaluate the design and structural integrity of a three-axle bogie frame. The results obtained from the numerical analysis were compared to those of the experiments. For the bogie frame used in the experiments, a failure evaluation was performed using non-destructive methods. The numerical analysis and experimental evaluation were satisfactory for the structural integrity evaluation.

• Proceedings of the Korean Society for Language and Information Conference
• /
• 2002.02a
• /
• pp.135-146
• /
• 2002

The so-called overapplication of Coda Neutralization in Korean, the occurrence of a neutralized consonant in a non-neutralizing environment, is often considered as evidence for serial derivation. In this paper I propose that the neutralization effect at surface is not a result of a phonological process at an intermediate level in serial derivation, but due to a constraint requiring the integrity of the morphological constituent: EDGE-INTEGRITY. It is argued that this is not reducible to an alignment constraint, but a genuine faithfulness constraint on the edge of a morphological constituent. The putative opacity related with the coda neutralization is shown to be an epiphenomenon arising from the ambisyllabic representation of a consonant at a morphological juncture, satisfying both EDGE-INTEGRITY arid Syllabic Conditions. Consonant Copy in the Jeju dialect provides further evidence for EDGE-INTEGRITY, the Only difference being that the conflict between Syllabic Conditions and EDGE-INTEGRITY is resolved by insertion of a copied consonant.

• Journal of the Korean Society of Systems Engineering
• /
• v.19 no.1
• /
• pp.1-13
• /
• 2023

Transportation of goods by rail in border areas requires considerable time, money, and human resources. Therefore, in this study, a blockchain-based non-stop passing system is proposed to solve this problem. In this study, each transit station and train are designated as one network node, and the corresponding node participates in the blockchain network to record and verify data. In the process, we will design a blockchain network using Docker and design a network interface. Without changing the data and information generated in the existing legacy clearance system, it is possible to configure a blockchain network to ensure the integrity and reliability of the data and to minimize the consumption of time and human resources. The railroad non-stop passing system aims to change the existing legacy system to a blockchain-based non-stop passing system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.7
• /
• pp.595-601
• /
• 2005

A mobile robot system utilizing NDT (Non-Destructive Testing) method is designed and fabricated f3r automatic integrity evaluation of large sized industrial reservoirs and pipelines. The developed mobile robot can crawl over the outer surface of the industrial facilities even though the shape of the structures is various and unsymmetric. The robot detects defects such as pinholes, cracks and thickness reduction at the wall of the facilities using EMAT (Electro-Magnetic Acoustic Transducer). Image processing technology for weld line detection at the surface of the target and host programs including defect detecting algorithms are also developed. Automation of defect detection for these kinds of large facilities using mobile robots is helpful to prevent significant troubles of the structures without danger of human beings under harmful environment.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.1
• /
• pp.73-78
• /
• 2001

Soundness evaluation of a structure being constructed under the sea is usually difficult. In this study, a cross-hole sonic logging(CSL) which have been used for non-destructive test of concrete piles is adopted for the integrity test and monitoring of DCM(deep cement mixing) treated soils. Chemical and physical characteristics of raw ground materials are analysed to delineate ground environmental effects on the strength of DCM treated soils. In order to convert cross-hole sonic logging data into compressive strength, correlations between compressive strengths and wave velocities of core samples have been obtained. It is found that there is little effect of ground environment on the strength of the DCM treated soils, and the density distribution of core samples and cross-hole logging data show that a defective zone may exist in the DCM treated soils. With the time lapse, however, the defective zone has been cured and consequently, compressive strength of the DCM treated soils increases and satisfies the design parameter. From this study it can be concluded that the cross-hole sonic logging can be used for the integrity test as well as monitoring the curing stage of the structures, successfully.