• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.375-380
• /
• 2001

MF is a half shaft blast furnace which has been developed at Mitsui Miike Smelter in the 1960’s to treat vertical retort residue. The MF has also been tested for treatment of various recycling materials and wastes. Now various secondaries and wastes (EAF dust, zinc leaching residue, Cu sludge, etc ) are mainly treated. Powder materials are briquetted with reductant before being fed to the furnace. Products are crude zinc oxide, matte, non-hazardous slag and steam. Zinc and lead are recovered in oxide dust, and copper and silver are recovered in matte. The MF can be widely applied to many kinds of materials which contain such non-ferrous metal-valuables. In addition, the improvement in operation and technology has effectively made the unit capacity much larger. The MF now has many advantages for these treatment processes.

• 자원환경지질
• /
• 제42권2호
• /
• pp.143-152
• /
• 2009

최근 몇 년간 발생한 원자재 가격의 급격한 변동은 국내 경제활동에 예상치 못한 부정적 영향을 초래하였다. 우리나라는 대부분 원자재를 수입에 의존하고 있어 예상치 못한 가격변동은 거시경제 변수를 통해 생산활동 전반에 영향을 미친다. 따라서 장기적 관점에서는 원자재 수요관리 혹은 공급안정성 확보 등 대안을 마련하여 정책적으로 지원하고 있으며 단기적 관점에서는 원자재 비축과 일반원자재 조기경보체제의 도입을 추진하고 있다. 단기적 관점의 정책 대안은 가격변동의 단기예측 가능성을 전제로 하고 있으며 최근까지 다양한 연구가 진행되어 왔다. 본 연구는 이와 같은 모수적 접근과 시계열 분석의 문제점을 완화하고 경제적 해석이 상대적으로 용이한 대안을 찾고자 하였다. 알루미늄, 전기동, 니켈을 대상으로 신호접근법을 활용하여 변수간 상관관계의 문제나 유의한 변수의 누락 문제를 완화할 수 있는 비모수적 접근을 시도하였다. 설정한 모형을 통해 실제 비철금속의 가격변동이 심화되었던 2004년 초와 2006년의 기간에 대해 모형이 선제적으로 신호를 발생시키고 있음을 확인하였다. 이는 사후적으로 살펴본 모형의 결과와도 큰 차이가 없는 것으로 나타나 본 연구의 모형이 기존연구의 단점을 완화하고 단기 가격변동을 예측할 수 있다는 실증적 결론을 얻을 수 있었다.

• 자원리싸이클링
• /
• 제19권6호
• /
• pp.11-26
• /
• 2010

일본의 도시광산자원과 금속재자원화산업을 파악하기 위하여, 일본(日本)의 금속소비량, 금속리싸이클리률을 논하고, 철스크랩, 사용이 끝난 자동차, 폐가전제품 및 폐전자정보기지 등의 대표적인 재자원화산업의 개요를 조사하였다. 일본은 금속자원 소비대국이고 각종 금속 축적량 대국이기도 하다. 도시광산자원의 리싸이클링률은 자급률로 계산할 때 Pb 50%, Fe 33%, Al 25%이고, Hg, Au, Cd, Mn, Mo, Ag 등이 이어지고 있다. 그러나 기능재료에 첨가되는 레어메탈 및 REE 등은 리싸이클링 기술개발 단계라고 할 수 있다. 자동차, 가전제품 PC 등 사용이 끝난 제품의 리싸이클링산업은 활발하고, 리사이클링률은 법정기준치를 상회하고 있다.

• 대한환경공학회지
• /
• 제35권7호
• /
• pp.464-471
• /
• 2013

본 연구에서는 LCA 기법으로 태양광 시스템 생산 시 소비되는 원료, 부원료, 에너지 등의 물질수지 자료를 분석하여 금속자원의 자원효율성 산정 및 필요금속자원량을 예측하였다. 태양광 시스템 생산 시 투입되는 금속자원의 자원효율성 분석결과 철 비철금속은 4가지 기술(SC-Si, MC-Si, CI(G)S, CdTe)에 대해 동일하게 납, 주석 순으로, 희유금속은 결정질 실리콘 시스템의 경우 갈륨, 레늄 순으로, 박막형 시스템의 경우 레늄, 로듐 순으로, 희토류는 4가지 기술에 대해 동일하게 가돌리늄, 사마리움 순으로 자원효율성이 높은 것으로 나타났다. 2030년까지 우리나라의 태양광 시스템의 증설에 필요한 금속자원량을 예측한 결과 자원순환에 의한 자체 수급량을 제외하고 알루미늄 2,545,670 ton, 구리 22,044 ton, 니켈 31 ton, 주석 1,695 ton 및 아연 92,069 ton이 필요한 것으로 나타났다.

• 동력기계공학회지
• /
• 제21권3호
• /
• pp.102-107
• /
• 2017

A tungsten inert gas (TIG) welding method was used for the bonding of stainless steel. TIG welding using inert gas (He or Ar gas) is a method to prevent oxidation and nitriding of materials and to combine non-ferrous metals. This method has the advantage of obtaining a smooth weld surface. In this study, the welding characteristics of 304 stainless steel welded by TIG welding method were analyzed by using nondestructive technique. Ultrasonic and Acoustic Emission (AE) was applied to evaluate the micro-damage of TIG welded 304 stainless steel. The velocity and damping coefficient of ultrasonic wave showed a slight difference in HAZ, which is the welding part of stainless steel. The AE parameters of average frequency, rise time and event were analyzed for the dynamic behavior of stainless steel during loading. Optimal AE parameters for evaluating the degree of damage to the specimen have been derived. Fractograph and metal structures of 304 stainless steel using SEM and optical microscope were discussed.

• 한국분말재료학회지
• /
• 제10권6호
• /
• pp.390-394
• /
• 2003

Ultra fine titanium carbide particles were synthesized by novel metallic thermo-reduction process. The vaporized TiC1$_4$+$CCl_4$ gases were reacted with liquid magnesium and the fine titanium carbide particles were then produced by combining the released titanium and carbon atoms. The vacuum treatment was followed to remove the residual phases of MgC1$_2$ and excess Mg. The stoichiometry, microstructure, fixed and carbon contents and lattice parameter were investigated in titanium carbide powders produced in various reaction parameters.

• 한국군사과학기술학회지
• /
• 제3권1호
• /
• pp.176-182
• /
• 2000

$360^{\circ}$ bending of Ti-6Al-4V large-diameter seamless tube(62.37 mm $OD {\times} 4.40mm$ wall thickness) has been achieved at room temperature without heating. The bending process comprised two steps : the first step is $360^{\circ}$ bending by an uniquely designed rotary bender allowing spring back, which is subsequently eliminated by the second or finishing step which comprised repeated bending processes by powered three roll bender, In odor to prevent collapse of tube during bending, Cerro $Tru^{TM}$(Trade name of a non-ferrous low melting point alloy)has been employed as a filler metal. The resultant ovality(out of roundness) obtained was 1.28%, as compared with 6~8% without applying Cerro $Tru^{TM}$.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.939-942
• /
• 2000

Single point diamond turning technique for optical crystals is reported in this paper. The main factors influencing the machined surface quality are discovered and regularities of machining process are drawn. Optical crystals have found more and more important applications in the field of modern optics. Optical crystals are mostly brittle materials of poor machinability. The traditional machining method is polishing which has many shortcomings such as low production efficiency, poor ability to be automatically controlled and edge effect of the workpiece. The purpose of our research is to find the optimum machining conditions for ductile cutting of optical crystals and apply the SPDT technique to the manufacturing of ultra precision optical components of brittle material.

• 한국기계가공학회지
• /
• 제20권12호
• /
• pp.78-84
• /
• 2021

Reducing the weight of automobiles is a significant global developmental task. Two materials are used to lighten automobiles: aluminum and CFRP frames. Aluminum is a non-ferrous metal, and CFRP is a composite material. They are lighter and harder than other materials. The two materials were used for the collision analysis. Subsequently, the two cases were compared. Three cases were considered for the collision analysis: head-on collision, partial head-on collision, and side collision at a speed of 60 km/h. The three cases were compared and analyzed considering the materials used to understand the difference between aluminum and CFRP and their collision characteristics.

• 소성∙가공
• /
• 제26권3호
• /
• pp.174-180
• /
• 2017

In this study, a new spot welding with electric resistance heated dies is suggested for the spot welding of non-ferrous metal plates for drawing and concurrent spot welding. This welding method involves two heating processes such as heating by conduction of electric resistance heated dies and heating by resistance between contacted surfaces of two plates by welding current induced to copper dies for the fusion of contacted metal. This welding process has welding variables such as current induced in heated and copper dies, the inner diameters of heated dies, and edge shape of the copper dies. Experimental conditions for each current should be established to get successful welding strength. The welding strength could reach to the desired value in industrial fields under the following conditions of contact diameters of heated dies in this case of overlapped aluminum5052 plates with 0.3-mm thickness: inner and outer diameters of 5.0 and 16mm, respectively; diameter of copper dies, 5.0mm; heating current, 6.8kA in heated steel dies; welding current, 8.6 kA in copper dies.