• The korean journal of orthodontics
• /
• v.27 no.3 s.62
• /
• pp.411-420
• /
• 1997

The propose of this study was to quantify the changes of soft tissue profile following orthodontic treatment and to evaluate the relationship of those to the skeletal elements. Pre-and post-treatment lateral cephalometric head films of 40 cases(20 extraction cases, 20 non-extraction cases) were traced, and the changes following treatment were measured and quantified by digital subtraction method, and statisticall analyzed. The obtained results were as follows; 1. in extraction group, the change of upper lip area(UL) was $558.60\pm355.17$ pixels, that of lower lip area(LL) was $941.15\pm364.07$ pixels. But, in non-extraction group the change of uper lip area(UL) was $125.65\pm404.16$ pixels, that of lower lip area(LL) was $104.05\pm440.93$ pixels, which was significantly lesser than those in extraction group. 2. In extraction group, there was significant correlationship between upper lip area change(UL) and difference of upper incisor point(${\Delta}UIP$). Lower lip area change(LL) was significantly correlated with difference of upper incisor(${\Delta}UIP$), difference of Franlrfort upper incisor angle(${\Delta}FUIA$) or difference of interincisal angle(${\Delta}IIA$). 3. In extraction group, the ratio of difference of upper incisor point(${\Delta}UIP$) to difference of labrale superius(${\Delta}LSP$) was 1.68; difference of lower incisor point(${\Delta}LIP$) to difference of labrale inferius(${\Delta}LI$) was 1.19; difference of upper incisor point(${\Delta}UIP$) to increment in upper lip thickness(${\Delta}TUL$) was 1.95. 4. In non-extraction group, there was a significant correlationship between upper lip area change(UL) and difference of upper incisor point(${\Delta}UIP$).

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.4
• /
• pp.347-365
• /
• 2020

In order to resolve traffic problems in urban areas and to increase the area of green spaces, tunnels in downtown areas are being increased. Additionally, the application of large port smoke extraction ventilation systems is increasing as a countermeasure to smoke extraction ventilation for tunnels with high potential for traffic congestion. It is known that the smoke extraction performance of the large port smoke extraction system is influenced not only by the amount of the extraction flow rate, but also by various factors such as the shape of the extraction port (damper) and the extraction air velocity through a damper. Therefore, in this study, the design standards and installation status of each country were investigated. When the extraction air flow rate was the same, the smoke extraction performance according to the size of the damper was numerically simulated in terms of smoke propagation distance, compared and evaluated, and the following results were obtained. As the cross-sectional area of the smoke damper increases, the extraction flow rate is concentrated in the damper close to the extraction fan, and the smoke extraction rate of the damper in downstream decreases, thereby increasing the smoke propagation distance on the downstream side. In order to prevent such a phenomenon, it is necessary to reduce the cross-sectional area of the smoke damper and increase the velocity of passing air through the damper so that the pressure loss passing through the damper increases, thereby reducing the non-uniformity of smoke extraction flow rate in the extraction section. In this analysis, it was found that when the interval distance of the extraction damper was 50 m, the air velocity passing through damper was 4.4 m/s or more, and when the interval distance of the extraction dampers was 100 m, the air velocity passing through damper was greater than 4.84 m/s, it was found to be advantageous to ensure smoke extraction performance.

• The Journal of the Korea Contents Association
• /
• v.12 no.2
• /
• pp.1-9
• /
• 2012

This paper presents an algorithm for depression diagnosis using the Neural Network with Weighted Fuzzy Membership functions (NEWFM) and heart rate variability (HRV). In the algorithm, 22 different features were initially extracted from the HRV signal by frequency domain, time domain, wavelet transformed, and Poincar$\acute{e}$ transformed feature extraction methods; of these 6 optimal features were selected by significance evaluation using Non-overlap Area Distribution Measurement (NADM) based on NEWFM. The proposed algorithm uses these 6 optimal features to diagnose depression with an accuracy of 95.83%.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.5 s.305
• /
• pp.157-164
• /
• 2005

The conventional adaptive detectors can not maintain sufficient detection performance at the presence of non-stationary clutter with unknown characteristics. This is caused by the lack of a priori information about clutter parameters changing over radar coordinates. To solve this problem, it is necessary to use clutter classifiers which have functions, such as the selection of the applied algorithm and its parameters extraction according to clutter conditions. In this paper, we describe the implementation of a clutter environment classifier for adaptive processing. In the environment classifier implemented on Visual C++, the extraction of the parameters and selection of processing algorithm for the adaptive processing unit are possible, and the result of algorithms can be verified at each stage.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.6
• /
• pp.772-780
• /
• 1998

The purpose of this research was to investigate the fiber content of and the characteristics of non-fibrous matters within the textiles exhumed from Keumreung-Ri, Pajoo of Kyunggi-do. Various microscopic methods' and the IR spectroscopy were used for the identification of fibers. The KS K 0251 Test Method as well as the IR spectroscopy and the SEM were used for the analysis of econ-fibrous matters. Fiber identification showed that each of the Pajoo samples were composed either of silk, cotton, or ramie. The results of the analysis of non-fibrous matters were as follows. The amount of water-extracted compound exceeded that of chloroform-extracted compound in both Pajoo 2 and Pajoo 5 samples. In Pajoo 5 sample which have already been dry cleaned using the mixed solution of n-hexane and n-dacane, the amount of chloroform extracted compound was 0% of the total extracted matter. The enzyme and HCI disintegration steps further removed the soils those were nonsoluble in water or chloroform. The most extraction was achieved at the HCI extraction stage.

• Korean Journal of Materials Research
• /
• v.15 no.10
• /
• pp.626-631
• /
• 2005

GaN-related compound semiconductors were grown on the corrugated interface substrate using a metalorganic chemical vapor deposition system to increase the optical power of white LEDs. The patterning of substrate for enhancing the extraction efficiency was processed using an inductively coupled plasma reactive ion etching system and the surface morphology of the etched sapphire wafer and that of the non-etched surface were investigated using an atomic force microscope. The structural and optical properties of GaN grown on the corrugated interface substrate were characterized by a high-resolution x-ray diffraction, transmission electron microscopy, atomic force microscope and photoluminescence. The roughness of the etched sapphire wafer was higher than that of the non-etched one. The surface of III-nitride films grown on the hemispherically patterned wafer showed the nano-sized pin-holes that were not grown partially. In this case, the leakage current of the LED chip at the reverse bias was abruptly increased. The reason is that the hemispherically patterned region doesn't have (0001) plane that is favor for GaN growth. The lateral growth of the GaN layer grown on (0001) plane located in between the patterns was enhanced by raising the growth temperature ana lowering the reactor pressure resulting in the smooth surface over the patterned region. The crystal quality of GaN on the patterned substrate was also similar with that of GaN on the conventional substrate and no defect was detected in the interface. The optical power of the LED on the patterned substrate was $14\%$ higher than that on the conventional substrate due to the increased extraction efficiency.

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.924-930
• /
• 1999

To extract insoluble proteins and improve physical properties of proteins, the sesame meal proteins was irradiated with $5\;kGy{\sim}20\;kGy$ at room temperature. The highest extraction rate of sesame meal protein was showed at irradiation dose of 5 kGy. The foaming capacity, foaming stability, emulsion capacity and emulsion stability of gamma irradiated sesame meal protein (GISP) were all increased as compared to those of the non-irradiated protein. Water absorption capacity of GISP was similar to that of non-irradiated protein and oil absorption capacity of GISP was decreased after treatment by gamma irradiation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.5
• /
• pp.103-110
• /
• 2008

A reliable extraction of welded area is the precedent task before the detection of weld defects in industrial radiography. This paper describes an attempt to detect and extract the welded features of steel tubes from the computed radiography(CR) images. The statistical properties are first analyzed on over 160 sample radiographic images which represent either weld or non-weld area to identify the differences between them. The analysis is then proceeded by pattern classification to determine the clustering parameters. These parameters are the width, the functional match, and continuity. The observed weld image is processed line by line to calculate these parameters for each flexible moving window in line image pixel set. The local statistic line-clustering method is used as the classifier to recognize each window data as weld or non-weld cluster. The sequential procedure is to track the edge lines between two distinct regions by iterative calculation of threshold, and it results in extracting the weld feature. Our methodology is concluded to be effective after experiment with CR weld images.

• The korean journal of orthodontics
• /
• v.44 no.3
• /
• pp.119-127
• /
• 2014

Objective: To evaluate the long-term effects of self-ligating brackets (SLBs) on transverse dimensions of arches and skeletal and soft tissues and to quantitatively evaluate the treatment outcome after non-extraction treatment with SLBs. Methods: The sample consisted of 24 (18 female and six male) subjects, with a mean age of $14.23{\pm}2.19$ years, who received treatment with the Damon$^{(R)}$3 appliances. Complete records including cephalometric radiographs and plaster models were obtained before treatment (T1), immediately after treatment (T2), six months after treatment (T3), and two years (T4) after treatment. Digital study models were generated. Twenty lateral cephalometric, six frontal cephalometric, and eight dental cast measurements were examined. The Peer Assessment Rating index was used to measure the treatment outcome. The Wilcoxon test was applied for statistical analysis of the changes. Results: There were significant increases in all transverse dental cast measurements with active treatment. There was some significant relapse in the long term, particularly in maxillary width (p < 0.05). Statistically significant increases were found in nasal (p < 0.001), maxillary base, upper molar, lower intercanine, and antigonial (p < 0.05) widths in T1-T2. Lower incisors were proclined and protruded in T1-T2. Conclusions: SLBs correct crowding by mechanisms involving incisor proclination and protrusion and expansion of the dental arches, without induction of clinically significant changes in hard and soft tissues of the face.

• Journal of Periodontal and Implant Science
• /
• v.51 no.2
• /
• pp.135-143
• /
• 2021

Purpose: To investigate factors affecting the antagonistic and adjacent teeth in patients after implant restoration and prosthetic rehabilitation. Methods: In total, 160 patients who visited Kyungpook National University Dental Hospital for implant surgery, prosthesis placement, and supportive periodontal therapy (SPT) were included in this study. The average follow-up period was 88.06 months, and the maximum was 175 months. Patients' history of smoking, diabetes, hypertension, and osteoporosis was investigated, and panoramic radiographs were taken after surgery and prosthetic treatment. During the follow-up period, extraction and prosthetic/endodontic treatments of the antagonistic and adjacent teeth were analyzed. The statistical analyses were performed using descriptive statistics, the chi-square test, the Fisher exact test, and multiple logistic regression analyses. Results: Treatment was performed on 29.4% of the studied antagonistic teeth with extraction performed in 20.0% and prosthetic treatment in 10.0%. Furthermore, 19.4% of the studied adjacent teeth underwent treatment, of which extraction was performed in 12.5% and prosthetic treatment in 7.5%. The treatment rate for adjacent teeth was 25.3% in smokers, which was higher than that of non-smokers (12.3%) (P=0.039). Patients who were non-adherent to SPT showed a significantly higher rate (19.6%) of antagonistic prosthetic treatment than did those who were adherent (5.5%) (P=0.006). Conclusions: Implant restoration can affect the adjacent and antagonistic teeth. Smoking, osteoporosis history, and absence of SPT may be risk factors for the treatment of the adjacent and antagonistic teeth.