Purpose : The study investigated the effects of Pilates exercise on strengthening trunk muscles of females who perform such exercise for the purpose of comparing activation of trunk muscles that contact while performing Pilates motions between females with or without at least 8 weeks of Pilates experience. Methods : The study investigated 10 females with at least 8 weeks of Pilates experience in the past 6 months (experienced group) and 10 healthy females without Pilates experience (non-experienced group). The study used basic Pilates postures involving hip abduction, lift, and leg swing motions as the measurement postures in comparing the activation of muscles used for stabilization, such as the rectus abdominis, external oblique abdominal, and transverse abdominis & internal oblique abdominal muscles. Surface electromyography was used for measuring muscle activation, and the measurements targeted activation of the rectus abdominis, external oblique abdominal, transversus abdominis, and internal oblique abdominal muscles. Results : The study results showed that, as compared to the non-experienced group, the experienced group had significantly higher muscle activation in the transverse abdominis and internal oblique abdominal muscles during hip abduction (p<.05) and significantly higher muscle activation in the rectus abdominis, external oblique abdominal, and transverse abdominis & internal oblique abdominal muscles during lift and leg swing motions (p<.05). Conclusion : Pilates exercise performed over a long period can be recommended as an effective exercise method that can increase the activation of trunk muscle, and especially, repeated performance of highly difficult motions can increase muscle activation even more, which can help promote spinal stabilization, prevent pain, and improve performance of activities of daily living.
The chemical mechanical planarization (CMP) is a process of physically and chemically polishing the semiconductor substrate. The planarization quality of a substrate can be evaluated by the within wafer non-uniformity (WIWNU). In order to improve WIWNU, it is important to manage the pad profile. In this study, a device capable of non-contact measurement of the pad thickness profile was developed. From the measured pad profile, the profile of the pad surface and the groove was extracted using the envelope function, and the pad thickness profile was derived using the difference between each profile. Thickness profiles of various CMP pads were measured using the developed PMS and envelope function. In the case of IC series pads, regardless of the pad wear amount, the envelopes closely follow the pad surface and grooves, making it easy to calculate the pad thickness profile. In the case of the H80 series pad, the pad thickness profile was easy to derive because the pad with a small wear amount did not reveal deep pores on the pad surface. However, the pad with a large wear amount make errors in the lower envelope profile, because there are pores deeper than the grooves. By removing these deep pores through filtering, the pad flatness could be clearly confirmed. Through the developed PMS and the pad thickness profile calculation method using the envelope function, the pad life, the amount of wear and the pad flatness can be easily derived and used for various pad analysis.
The existing fruit sorter has the method of tilting tray and extracting fruits by the action of solenoid or springs. In peaches, the most sort processing is supported by man because the sorter make fatal damage to peaches. In order to sustain commodity and quality of peach non-destructive, non-contact and real time based sorter was needed. This study was performed to develop peach sorter using near-infrared spectroscopy in real time and nondestructively. The prototype was developed to decrease internal and external damage of peach caused by the sorter, which had a way of extracting tray with it. To decrease positioning error of measuring sugar contents in peaches, fiber optic with two direction diverged was developed and attached to the prototype. The program for sorting and operating the prototype was developed using visual basic 6.0 language to measure several quality index such as chlorophyll, some defect, sugar contents. The all sorting result was saved to return farmers for being index of good quality production. Using the prototype, program and MLR(multiple linear regression) model, it was possible to estimate sugar content of peaches with the determination coefficient of 0.71 and SEC of 0.42bx using 16 wavelengths. The developed MLR model had determination coefficient of 0.69, and SEP of 0.49bx, it was better result than single point measurement of 1999's. The peach sweetness grading system based on NIR reflectance method, which consists of photodiode-array sensor, quartz-halogen lamp and fiber optic diverged two bundles for transmitting the light and detecting the reflected light, was developed and evaluated. It was possible to predict the soluble solid contents of peaches in real time and nondestructively using the system which had the accuracy of 91 percentage and the capacity of 7,200 peaches per an hour for grading 2 classes by sugar contents. Draining is one of important factors for production peaches having good qualities. The reason why one farm's product belows others could be estimated for bad draining, over-much nitrogen fertilizer, soil characteristics, etc. After this, the report saved by the peach grading system will have to be good materials to farmers for production high quality peaches. They could share the result or compare with others and diagnose their cultural practice.
In general, the design of structures and its construction processes are fundamentally dependent on their foundation and supporting ground. Thus, it is imperative to understand the behavior of the soil under certain stress and drainage conditions. As it is well known that certain characteristics and behaviors of soils with fines are highly dependent on water content, it is critical to accurately measure and identify the status of the soils in terms of water contents. Liquid limit is one of the important soil index properties to define such characteristics. However, liquid limit measurement can be affected by the proficiency of the operator. On the other hand, dynamic properties of soils are also necessary in many different applications and current testing methods often require special equipment in the laboratory, which is often expensive and sensitive to test conditions. In order to address these concerns and advance the state of the art, this study explores a novel method to determine the liquid limit of cohesive soil by employing video-based vibration analysis. In this research, the modal characteristics of cohesive soil columns are extracted from videos by utilizing phase-based motion estimation. By utilizing the proposed method that analyzes the optical flow in every pixel of the series of frames that effectively represents the motion of corresponding points of the soil specimen, the vibration characteristics of the entire soil specimen could be assessed in a non-contact and non-destructive manner. The experimental investigation results compared with the liquid limit determined by the standard method verify that the proposed method reliably and straightforwardly identifies the liquid limit of clay. It is envisioned that the proposed approach could be applied to measuring liquid limit of soil in practical field, entertaining its simple implementation that only requires a digital camera or even a smartphone without the need for special equipment that may be subject to the proficiency of the operator.
Jianhui Hu;Wujun Chen;Chengjun Gao;Yibei Zhang;Yonglin Chen;Pujin Wang
Structural Engineering and Mechanics
/
제90권6호
/
pp.543-549
/
2024
The utilization of the fabric materials for lightweight building structures has attracted considerable attention due to the multiple functions and high strength-to-weight ratio. The mechanical properties of the fabric materials evolve with the loading cycle, especially for the Poisson's ratio that requires the full cyclic strain to determine the accurate values. The digital image correlation method has been justified but needs to meet the flexibility and complexity requirements of the fabric materials. This paper thus proposes a modified digital image correlation method to quantify the Poisson's ratio of fabric materials. To obtain the accurate Poisson's ratio of fabric materials in the cyclic experiments using non-contact measuring method, a speckle generation of the digital image correlation method is implemented to obtain the strain distribution and strain characteristics. The uniaxial cyclic experiments for the fabric materials are carried out in the warp, weft and 45° directions. The digital image correlation photos are taken when the material properties become stable in the cyclic loading. The results show that the strain distributions are non-uniform and dependent on the specimen directions. The reliable Poisson's ratios of the fabric materials in the warp, weft and 45° directions are 0.016, 1.2 and 2.6. The strain asymmetry at the maximum strain position is related with the weaving architecture. These observations and results are indispensable to understand the Poisson's ratios of fabric materials and to guide the proper analysis of the large-span membrane structures.
최근 전자기술의 발달로 대상물에 접촉하지 않고, 장비에서 발사된 레이저가 측정대상물에 직접 반사되어 거리를 측정 가능하게 하였다. 더욱이 3차원위치를 결정할 수 있는 무 프리즘 토털스테이션이 등장하여 도로, 공항, 항만 등의 토목분야 뿐 아니라 구조물변위, 계측 등의 건축분야에 그 활용이 증대되고 있다. 따라서 본 연구에서는 무 프리즘 토털스테이션의 정확도를 평가하기 위하여 관측거리에 따른 재료 및 반사각도별로 관측하여 정확도를 분석하였고, 그 활용성을 위하여 지형측량에 적용하였다. 연구한 결과는 무 프리즘 토털스테이션은 반사각도가 $90^{\circ}$일 때는 재료와 상관없이 매우 양호한 값으로 분석되었다, 점차적으로 반사각도가 예각으로 증가할 때 RMSE는 높아지는 양상이 보였다. 그리고 관측거리에 따른 재료 및 반사각도별로 회귀분석 한 결과, 관측거리와 반사각도는 상관성이 있는 것으로 판단되며, 재료와는 상관성이 없는 것으로 분석되었다. 일반적인 지형측량에 있어서 무프리즘 토털스테이션을 적절히 활용한다면, 교통의 흐름이 많은 곳의 도로, 경사각이 높은 암벽의 절리면, 기타 위험지역에서 측량자의 안전과 신속한 측량작업을 제공할 것으로 판단된다.
치과에 내원하는 주된 이유 중의 하나는 통증이며 이런 통증 치료시에 장시간의 개구는 저작근에 근육문제를 야기할 수 있다. 장시간의 근피로를 유발할 수 있는 치과진료실내에서의 치료로 인하여 두통, 저작근의 통증, 개구 장애, 저작 곤란 등을 유발할 수 있으며, 통증을 치료하기위하여 내원한 환자로서는 예상하지 못한 다른 국면의 통증에 맞부딪치게 된다. 물론 이악물기등의 악습관 그리고 과도한 껌저작등으로 인해서도 임상적으로 근쇠약감이 호소하며 이에 대해서는 실험적 근피로유도후에 근전도등을 이용하여 연구가 이루어져왔다. 근쇠약감 및 근피로로 인하여 교합양상의 변화를 주관적으로 호소하며 이 상태에서의 근육의 근전도 평가가 이루어져 왔던 것에 비하여 교합의 변화에 대해서는 평가가 미진하였다. 과도한 이악물기나 개구 및 껌 저작으로 인한 근피로가 교합양상에 미치는 변화를 평가하고 감각신경 변화로 인하여 근통증에 영향을 미치는 조사하고자 측두하악장애 증상이 없고 정상 범주의 교합을 가졌으며 교정치료나 3개 이상의 보철 치료를 받지 않은 지원자 총 24명(평균나이 25.7세)을 대상으로 하였다. 근 피로를 실험적으로 유발하기 위하여 이악물기, 장시간 개구 상태 유지, 주저작측으로 껌 저작을 시행하여 근피로를 느끼도록 하였다. 본 연구에서는 전기적 자극을 이용하는 뉴로미터를 이용하여 근통증시에 주저작측 삼차신경의 감각신경을 측정하였고, 근통증을 느끼는 시점에 근쇠약감이나 저작근 기능 장애로 인한 교합상태의 변화를 평가하기 위하여 T-scan II system을 이용하여 교합접촉, 교합력 등을 조사하여 다음의 결과를 얻었다. 1. 근피로는 장시간 개구 후에 가장먼저 느꼈으며 근통증을 느끼는 시간은 이악물기 후에 가장 빨리 나타났다. 근피로, 통증을 느끼는 시점에서의 근피로, 통증의 정도는 이악물기 후에 가장 높았다 2. 최초접촉시의 접촉시간 접촉력은 차이가 없었으며 교두간 접촉위에서 껌저작후 접촉시간, 장시간 개구 후와 껌저작후에 접촉력이 감소하였다. 최대접촉위에서는 장시간 개구후와 껌저작후에 접촉력이 감소하였다. 최종접촉위에서는 모든 실험적 근피로후에 접촉시간이 감소하였고 접촉력은 껌저작후에 감소하였다. 3. 실험적 근피로가 유발된 근육에서의 감각 변화는 보이지 않았다. 4. 접촉수는 실험적 근피로 유발후에 최초접촉위 최대 접촉위 그리고 최종접촉위에서 감소되는 양상을 보였다. 5. 접촉수의 주저작측에 따른 비교에서 좌측으로 껌을 저작한 군은 접촉수에 좌우측 차이를 보이지 않았으며, 우측으로 껌을 저작한 군에서는 좌측이 많았다. 결론적으로 구강내외에 발생하는 일련의 사건은 임상적으로 근쇠약감을 호소하는 경우 교합양상에 변화를 초래 할 수 있음을 확인 할 수 있었으며, 장시간의 개구나 이악물기, 과도한 저작등의 악구강계에 영향을 미칠 수 사건은 특히 치과치료 시에 교합 변화에 주의를 요함을 확인할 수 있었다.
목적: 본 연구에서는 동일재질의 투명 및 써클소프트콘택트렌즈(써클렌즈)를 정상안과 건성안에 착용시켰을 때 착용시간 경과에 따른 눈물막 안정성의 차이를 분석하고자 하였다. 방법: 연구대상자를 눈물량에 따라 정상안과 건성안으로 분류한 후 hilafilcon B 재질과 nelfilcon A 재질의 투명 및 써클렌즈를 각각 착용시키고, 렌즈 착용 30분 후, 6시간 후에 비침입성 눈물막 파괴시간, 렌즈중심안정위치, 눈물막깨짐 시작부위를 측정하여 눈물막 안정성의 변화를 알아보였다. 결과: 정상안과 건성안 모두 투명 및 써클콘택트렌즈 착용 시 착용시간경과에 따라 눈물막파괴시간은 통계적으로 유의한 감소를 보였다. 눈물막깨짐 시작 비율은 두 렌즈 모두 투명렌즈보다 써클렌즈의 주변부에서 높았고, 정상안보다는 건성안의 주변부에서 높게 나타났다. Hilafilcon B 재질보다는 nelfilcon A 재질 렌즈의 주변부에서 눈물막깨짐 시작 비율이 높았으나 착용시간경과에 따른 변화는 서로 다른 양상으로 나타났다. 한편, hilafilcon B 재질의 써클렌즈 착용 시 단위면적 당 눈물막깨짐 개수는 모두 주변부에서 많게 나타났던 반면, nelfilcon A 재질 써클렌즈의 경우는 착용시간 경과에 따라 중심부에서의 수가 증가하였다. 또한, 렌즈중심안정위치는 착용시간 경과에 따라 두 재질 모두 써클렌즈에 비해 투명렌즈가 동공중심 가까이에 존재하였으나 정상안에 비해 건성안의 중심이탈이 크게 나타났다. 결론: 본 연구결과 렌즈착용시간이 경과함에 따라 착색공정을 거친 써클렌즈 뿐만 아니라 투명렌즈도 눈물막에 미치는 영향이 달라질 수 있으며, 렌즈재질에 따라 눈물막 안정성에 영향을 주는 요인 또한 달라짐을 알 수 있었다. 따라서 투명 및 써클렌즈를 착용하고자 할 때에는 착용자의 일일착용시간이나 착용기간 등과 같은 사용습관에 따라 렌즈의 착색공법/염료 뿐만 아니라 렌즈 재질 또한 고려하여 적절한 렌즈를 선택하여야 할 것이다.
본 논문에서는 레이저기반 응력측정을 위한 비접촉식 로드셀을 개발을 위하여, 실내실험을 통하여 기술을 검증하고, 실규모 실험을 통하여 문제점을 파악하였으며, 최종적으로 현장적용에 적합한 응력측정용 비접촉식 로드셀 프로토타입을 개발하였다. 이를 위하여, 중심공 압축타입의 로드셀 제작에 사용되는 로드셀 몸체 표면에 용사코팅기술을 이용하여 알루미나를 도포하고, 레이저를 기반으로한 압분광법을 이용하여, 비접촉식으로 응력을 계측하였다. 이때, 인가되는 응력과 스펙트럼 이동간의 관계가 선형임을 확인하였다. 해당 기술의 현장 적용성 확인을 위하여, 실규모 프리스트레스 콘크리트 시편을 제작하고, 레이저를 조사하여 인가된 응력을 확인하는 과정에서, 반복적인 상황 하에서 레이저 조사 위치가 동일해야 함을 확인하였다. 이를 보완하기 위하여 프로브를 고정할 수 있는 케이싱이 포함된 로드셀 프로토타입을 제작하였고, 실내일축압축시험을 통하여 압축력과 스펙트럼 이동간의 선형성을 확인하였다. 따라서, 본 연구를 통하여 개발된 비접촉식 로드셀을 이용하여, 압축력을 효과적으로 측정할 수 있을 것으로 기대된다.
기름 유출로 인한 피해는 수질환경 및 생태계를 단시간에 파괴할 뿐만 아니라 한번 오염이 되면 회복하는데 상당한 시간이 걸리고 회복이 어려우며, 지속적으로 나타난다. 때문에 해양이나 하천, 담수 등의 기름유출을 모니터링할 수 있는 오일 검출기의 필요성이 매우 높다. 오일을 검출할 수 있는 기술로는 크게 접촉식과 비접촉식으로 구분할 수 있으며, 접촉식으로는 Conductivity, Capacitance, Microwave 등이 있고 비접촉식으로는 Infrared, UV, Laser, Optic, Radar 등으로 구분할 수 있다. 수면 위에 있는 오일을 측정하기 위해서는 파고 및 너울, 빛의 산란, 온도, 염도 등 여러 가지 관측의 장애가 존재하기에 측정하고자 하는 환경에 맞는 오일 검출기를 선택하여 사용해야 한다. 본 논문에서는 접촉식 방식으로 정유회사 및 유화회사, 발전소 등의 오일 관련 업종에서 사용할 수 있는 오일 검출기를 구현하였다. 장비의 구성은 수면 위에 띄워 놓는 센서 모듈과 센서 모듈에서 들어오는 신호를 가공하여 표시하는 제어기로 구분하며, 센서를 통하여 오일의 유무를 판별하고 더 나아가 오일의 양과 오일의 종류에 따른 유전율의 변화를 관측하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.