• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.3
• /
• pp.11-19
• /
• 2009

Recently, concerns relating to the maintenance of large structures have been increased. In addition, the number of large structures that need to be evaluated for their structural safety due to natural disasters and structural deterioration has been rapidly increasing. It is common for the structural characteristics of an older large structure to differ from the characteristics in the initial design stage, and changes in dynamic characteristics may result from a reduction in stiffness due to cracks on the materials. The process of deterioration of such structures enables the detection of damaged locations, as well as a quantitative evaluation. One of the typical measuring instruments used for the monitoring of bridges and buildings is the dynamic measurement system. Conventional dynamic measurement systems require considerable cabling to facilitate a direct connection between sensor and DAQ logger. For this reason, a method of measuring structural responses from a remote distance without the mounted sensors is needed. In terms of non-contact methods that are applicable to dynamic response measurement, the methods using the doppler effect of a laser or a GPS are commonly used. However, such methods could not be generally applied to bridge structures because of their costs and inaccuracies. Alternatively, a method using a visual image can be economical as well as feasible for measuring vibration signals of inaccessible bridge structures and extracting their dynamic characteristics. Many studies have been conducted using camera visual signals instead of conventional mounted sensors. However, these studies have been focused on measuring displacement response by an image processing technique after recording a position of the target mounted on the structure, in which the number of measurement targets may be limited. Therefore, in this study, a model experiment was carried out to verify the measurement algorithm for measuring multi-point displacement responses by using a DIC (Digital Image Correlation) technique.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.4
• /
• pp.660-666
• /
• 2003

The purpose of this study was to investigate the inhibitory effect of Er:YAG laser against the intraoral acid producing bacterium of S. mutans. Bacterial pellet containing S. mutans KCTC 3065 was irradiated by Er:YAG laser having a $650\;{\mu}m$ diameter beam by non-contact mode. Irradiated parameters were 50mJ, 10Hz and exposure time were 1s, 3s, 5s, 7s, 9s respectively. We obtained the following results of relative growth rate and acid-producing ability of S. mutans by culturing for 48hrs. 1. The growth rate of S. mutans was decreased in the group of laser irradiation compared to the control group(P<0.01). 2. The growth rate at laser irradiation group of 7s, 9s irradiation time was decreased significantly compared to the laser irradiation group of 1s, 3s, 5s irradiation time, until 12 hours(P<0.05). After 24 hours, all groups of laser irradiation were not found to be statistically different in each other. 3. The acid-producing ability of S. mutans was inhibited for a certain duration by irradiation of laser. In summary, the growth rate and acid producing ability of S. mutans decreased according to laser irradiation. This effect was directly related to the amount of irradiation time. These results suggested that Er:YAG laser had an growth inhibition effect on S. mutans.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.977-980
• /
• 2015

Beacons have been noted in the core of the recent things Internet. It is also the technology is spreading most rapidly among the things Internet-related communication technologies. Beacon is a data communications technology that provides information that is customized to know the user's location. Using the BLE technology, to grasp the position of such people and goods. In addition to the non-contact method, since it is possible to communicate within the maximum 70m, it has attracted the interest than the NFC. Beacon, guidance for the current coupon, you can use as an advertising platform, such as the provision of product information, it has also been used in the indoor positioning service. Therefore, in this paper, we introduce about whether Case Study beacon is utilized how in the Internet of Things, were analyzed. Beacon exit the smart phone, the date to be used in conjunction with a wearable device, such as Google glasses and smart watch was not far away. Future it is expected or beacons are used everywhere to be expanded.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.329-331
• /
• 2018

In this paper, we propose a monitoring system that starts with the supply of raw materials for threading, is processed into a lathe machine, and checks for defects of the product are automatically performed by the robot with Smart Factory technology through assembly and disassembly. Completion check according to the production instruction quantity and production instruction is made by checking the production status according to whether or not the raw material is worn by the displacement sensor, and checking the pitch and the contour of the processed female and male to determine OK and NG. The robotic system acts as a relay for loading and unloading of raw materials, pallet transfer, and overall process, and it acts as an intermediary for organically driving. The location information of the threaded products is collected by using the non-contact wireless tag and the energy saving system Production efficiency and utilization rate were checked. The environmental sensor collects the air-conditioning environment data (temperature, humidity), measures the temperature and humidity accurately, and checks the quality of product processing. It monitors and monitors the driving hazard level environment (overheating, humidity) of the product. Controls for CNC and robot module PLC as a heterogeneous system.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.807-812
• /
• 2020

In order to prevent the national wide spread of the COVID-19 virus, the government enforces to use an electronic access registration system for public facilities to effectively track and manage the spread. Initially, there was a lot of hassle to write a directory, but recently a system for creating an electronic access list using QR codes, what is called KI-Pass, is mainly used. However, the procedure for generating a QR code is somewhat cumbersome. In this paper, we propose a new electronic access registration system that does not require QR code. This system effectively controls the suspicious visitor by using a mask wearing discriminator which has been implemented using deep learning technology, and a non-contact thermometer package. In addition, by linking the beacon, a short-range wireless communication technology, and the visitor's smartphone application, basic information of the facility visitor is automatically registered to KDCA through the server. On the other hand, the user access information registered in the server is encrypted and stored, and is automatically destroyed after up to 4 weeks. This system is expected to be very effective in preventing the spread of other new infectious diseases as well as responding to the coronavirus which is recording a high spread worldwide.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.728-734
• /
• 2001

The purpose of this study was to investigate the effects of Er:YAG laser on cutting of efficacy of enamel and dentin in primary and permanent teeth. We used the enamel and dentin specimens of human teeth which contain the physiologic saline and maintain the pulpal pressure in dentinal tubules. Each specimen was exposed to Er:YAG laser with non-contact mode under different treatment condition of irradiation energy, pulse repetition rate. We investigated the cutting efficacy of Er:YAG laser by Scanning Intensity Microscopy, and obtained following results. 1. Cutting volume of enamel and dentin in primary and permanent teeth were increased by increasing the irradiation energy, pulse repetition rate. 2. Cutting volume of primary teeth was larger than that of permanent teeth. 3. Cutting volume of dentin was larger than that of enamel in primary and permanent teeth. From these results, Er:YAG laser would be more effective in cutting dentin than enamel, and in cutting primary teeth than permanent teeth for clinical application.

• Structural Engineering and Mechanics
• /
• v.55 no.4
• /
• pp.857-869
• /
• 2015

The aluminum 7075-T6 is known as an alloy widely used in aircraft structural applications, which does not exhibit strain rate sensitivity during dynamic compressive tests. Despite mechanical importance of the material, there is not enough attention to determine appropriate sample dimensions such as a sample diameter relative to the device bar diameter and sample length to diameter (L/D) ratio for dynamic tests and how these two parameters can change mechanical behaviors of the sample under dynamic loading condition. In this study, various samples which have different diameters of 31.8, 25.4, 15.9, and 9.5 mm and sample L/D ratios of 2.0, 1.5, 1.0, 0.5, and 0.25 were tested using Split Hopkinson Pressure Bar (SHPB), as this testing device is proper to characterize mechanical behaviors of solid materials at high strain rates. The mechanical behavior of this alloy was examined under ${\sim}200-5,500s^{-1}$ dynamic strain rate. Aluminum samples of 2.0, 1.5 and 1.0 of L/D ratios were well fitted into the stress-strain curve, Madison and Green's diagram, regardless of the sample diameters. Also, the 0.5 and 0.25 L/D ratio samples having the diameter of 31.8 and 25.4 mm followed the stress-strain curve. As results, larger samples (31.8 and 25.4 mm) in diameters followed the stress-strain curve regardless of the L/D ratios, whereas the 0.5 and 0.25 L/D ratios of small diameter sample (15.9 and 9.5 mm) did not follow the stress-strain diagram but significantly deviate from the diagram. Our results indicate that the L/D ratio is important determinant in stress-strain responses under the SHPB test when the sample diameter is small relative to the test bar diameter (31.8 mm), but when sample diameter is close to the bar diameter, L/D ratio does not significantly affect the stress-strain responses. This suggests that the areal mismatch (non-contact area of the testing bar) between the sample and the bar can misrepresent mechanical behaviors of the aluminum 7075-T6 at the dynamic loading condition.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.241-249
• /
• 2012

The rapid development of the current information and communication brings big changes and progress in the health service delivery system. And it is becoming the worldwide trend increasingly. As the name of medical information, by more rapid, detail and more quickly to the patients and diagnosis of the disease it provides not only a high level of health care services but also hospitals and related institutions are making increase the efficiency of the work. Among them, the Telemedicine, that system has many advantage which can expect the shorten the waiting time and the uniform high level of medical, etc. without visiting medical institutions. Especially, the most advantage is it can increase the accessibility of information about extensive medical, without regard to the time and place. But this is the reality, which compared speed the development of modern science and technology with lack of operational regulations and mindset. Current in our Medical Law, it regulates the Telemedicine, but it has Institutional, facility, and environmental constraints. Because, there is no detailed legal relationship. And it takes that in terms of a special form called by a non-face-to-face contact with medical practice rather than the scene. Therefore, in this paper will find a way out to activate the Telemedicine by presupposes the development potential is infinite and find the legal issues and improvements.

• Journal of the Korean Vacuum Society
• /
• v.19 no.3
• /
• pp.217-223
• /
• 2010

We grew multi-stacked InAs/$In_{0.1}Ga_{0.9}As$ DWELL (dot-in-a-well) structure by metal organic chemical vapor deposition and investigated optical properties by photoluminescence and I-V characteristics by dark current measurement. When stacking InAs quantum dots (QDs) with same growth parameter, the size and density of QDs were changed, resulting in the bimodal emission peak. By decreasing the flow rate of TMIn, we achieved the uniform multi-stacked QD structure which had the single emission peak and high PL intensity. As the growth temperature of n-type GaAs top contact layer (TCL) is above $600^{\circ}C$, the PL intensity severely decreased and dark current level increased. At bias of 0.5 V, the activation energy for temperature dependence of dark current decreased from 106 meV to 48 meV with increasing the growth temperature of n-type GaAs TCL from 580 to $650^{\circ}C$. This suggest that the thermal escape of bounded electrons and non-radiative transition become dominant due to the thermal inter-diffusion at the interface between InAs QDs and $In_{0.1}Ga_{0.9}As$ well layer.

• Korean Chemical Engineering Research
• /
• v.51 no.3
• /
• pp.388-393
• /
• 2013

The study was focused to evaluate the possibility for combination membrane of bacterial cellulose (BC) and graphene with high electrical properties. BC with natural polymer matrix was known to have strong physical strength. For the combination of graphene with BC, the surface of graphene was modified with oxygen plasma by changing strength and time of radio waves in room temperature. Water contact angle of modified graphene grew smaller from $130^{\circ}$ to $12^{\circ}$. XPS analysis showed that oxygen content after treatment increased from 2.99 to 10.98%. Damage degree of graphene was examined from $I_D/I_G$ ratio of Raman analysis. $I_D/I_G$ ratio of non-treated graphene (NTG) was 0.11, and 0.36 to 0.43 in plasma treated graphene (PTG), increasing structural defects of PTG. XRD analysis of PTG membrane with BC was $2{\theta}$ same to BC only, indicating chemically combined membrane. In FT-IR analysis, 1,000 to 1,300 $cm^{-1}$ (C=O) peak indicating oxygen radicals in PTG membrane had formed was larger than NTG membrane. The results suggest that BC as an alternation of plastic material for graphene combination has a possibility in some degree on the part like transparent conductive films.