• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03b
• /
• pp.12-12
• /
• 2010

The hall probe measurement system was used to measure the critical current distribution of superconducting coated conductor. The system consists of reel to reel moving apparatus, 7 array hall probe, a rotary encoder and permanent magnet. The magnetic field profile across the width of superconducting coated conductor using Bean's critical state model was calculated. The effect of various parameters of the formulas on the magnetic field distribution and the effect of shape and size of artificial defects, which were formed on the surface of SmBa2Cu3O7-d(SmBCO) coated conductor using laser marking system, on the hall probe magnetic field signal of the hall probe measurement system was investigated.

• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.54-61
• /
• 2012

This study surveyed the preparation of 8oz coated fabric and the physical property of the coated fabric according to the treated condition for the sail yacht. And the coated fabrics were compared with the performance of overseas products for verification. Physical properties of the coated fabric treated with non-yellowing functional polyurethane resin were examined according to the treatment condition such as compression and ageing treatments. Finally, yellowing fastness to light for 60 hours was assessed. Considering the compression condition after coating, good physical property was obtained at $6kgf/cm^2$. Also, the performance of yellowing fastness was similar to performance of overseas goods.

• Membrane and Water Treatment
• /
• v.13 no.3
• /
• pp.111-119
• /
• 2022

In this research, bentonite was intercalated with CMC and then two different percentages of glutaraldehyde (5 & 10%) were added as a crosslink agent to achieve non water-soluble composites. Then the composites were coated on clay-based microfiltration membranes which were synthesized in the previous work of the authors. The XRD technique was used to track the intercalation mechanism and FTIR was used to study the crosslink procedure. SEM was used to study the microstructure and morphology of the coated samples and then the ability of non-coated and coated samples for removal of Cr³⁺ ions was studied and compared. It was seen that the samples coated with the synthesized composite including 10% of glutaraldehyde showed the best results and removed 99.7% of Cr³⁺ ions from water polluted with 5 ppm of Cr³⁺ ions.

• Corrosion Science and Technology
• /
• v.9 no.5
• /
• pp.223-232
• /
• 2010

NiTi alloy has been used for orthodontic wire due to good mechanical properties, such as elastic strength, friction resistance, and high corrosion resistance. Recently, these wire were coated by polymer and ceramic materials for aesthetics. The purpose of this study was to investigate electrochemical characteristics of tooth colored NiTi wire using various instruments. Wires (round type and rectangular type) were used, respectively, for experiment. Polymer coating was carried out for wire. Specimen was investigated with optical microscopy (OM), field emission scanning electron microscopy (FE-SEM) and energy dispersive x-ray spectroscopy (EDS). The corrosion properties of the specimens were examined using potentiodynamic tests (potential range of -1500 ~ 2000 mV) and electrochemical impedance spectroscopy (frequency range of 100 kHz ~ 10 mHz) in a 0.9 % NaCl solution by potentiostat. From the results of polarization behavior, the passive region of non-coated NiTi wire showed largely, whereas, the passive region of curved NiTi wire showed shortly in anodic polarization curve. In the case of coated NiTi wire, pitting and crevice corrosion occurred severely at interface between non-coated and coated region. From the results of EIS, polarization resistance(Rp) value of non-coated round and rectangular NiTi wire at curved part showed $5.10{\times}10^5{\Omega}cm^2$ and $4.43{\times}10^5{\Omega}cm^2$. lower than that of coated NiTi wire. $R_p$ of coated round and rectangular NiTi wire at curved part showed $1.31{\times}10^6{\Omega}cm^2$ and $1.19{\times}10^6{\Omega}cm^2$.

• Progress in Superconductivity and Cryogenics
• /
• v.12 no.2
• /
• pp.9-12
• /
• 2010

A lamination system using reflow soldering was developed to enhance the mechanical properties of high temperature superconductor (HTS) tape. The laminated coated conductor tape was fabricated using the continuous lamination process. The mean, maximum, and minimum tensile loads in a T-peel test of the laminated coated conductor were 9.9 N, 12.5 N, and 7.6 N, respectively. The critical current ($I_c$) distributions of the non-laminated and laminated coated conductor were compared using anon-contact Hall probe method. The transport $I_c$ nearly matched the non-contact $I_c$; however, some degraded Ic regions were found on the length of 800 cm of laminated coated conductor. We confirmed that the cause of the partially degraded $I_c$ was due to an increase in line tension by (1) solidification induced by a change of composition that usually occurs in molten brass (Cu, Zn) in solder, or (2) non-homogeneity of the thickness of the coated conductor or metal tapes. We suggest that reflow soldering is a promising method for reinforced HTS tape if the controlling solder thickness and lamination guide are modified.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.4
• /
• pp.326-331
• /
• 2000

We have fabricated the field emitter arrays coated with diamond-like carbon (DLC) films that improved the field emission characteristics. The nitrogen doped DLC films are prepared by the filtered cathodic vacuum are (FCVA) tehnique. The activation energy of the nitrogen doped DLC films are derived from electrical conductivity measurements. The silicon field emission arrays (FEAs) were prepared by the VLSI technique. The turn-on field was rapidly decreasing and the emission current was remarkably increasing the DLC-coated FEAs than the non-coated silicon FEAs. In the nitrogen doped FEAs, the turn-on field decreased and the emission current increased with increasing the nitrogen found out the field emission current and the work function of the DLC-coated FEAs was remarkably decreased than that of the non-coated silicon FEAs. As nitrogen doping concentrations are increased the work function of FEAs is decreased and the field emission properties are improved in nitrogen doped DLC-coated FEAs. This phenomenon in due the fact that the Fermi energy level moves to the conduction band by increasing nitrogen doping concentration.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.20 no.1
• /
• pp.61-66
• /
• 2000

An experiment was conducted to evaluate the effects of seed coating on germination and early growth of tall fescue (Festuca arundinacea Schr.), orchardgrass (Dactylis glomerata L.), and alfalfa (Medicago sativa L.) over sown on unploughed hilly and forested areas. Establishment and early growth of coated tall fescue and orchardgrass on unploughed hilly area were not significantly influenced by seed coating. Establishment and early growth of coated alfalfa on unploughed hilly area were higher than non-coated and showed 4.7% and 4.0 g/m2, respectively. Establishment of coated tall fescue (11.8%) on forested area were higher than noncoated (0.3%), but ealy growth of tall fescue was not significantly influences by seed coating. Establishment of over sown orchardgrass on forested area was not significantly affected by seed coating, but early growth of coated seed (18.7%) was better than that of non-coated (0.3%). Establishment of coated alfalfa on forested area were higher than those of non-coated. Results of this study indicate that the establishment and early growth of over sown tall fescue, orchardgrass, and alfalfa could be improved by seed coating.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.54-69
• /
• 1996

The purpose of this vitro study was to evaluate attachment and proliferation of human pulpal cells to the attachment glycoprotein-coated and non-coated culture dishes. Well known adhesive glycoproteins were used, such as type I collagen, type IV collagen, fibronectin, laminin, and vitronection. Each adhesive glycoproteins applied onto the culture dishes. In this study, the protein coated and non-coated dishes were classified as each groups. Human pulpal cells onto each culture dishes. After 90 minute, 4 hour and 24 hour incubation attached cells in each group were counted with hematocytometer for evaluation of the attachemnt of human pulpal cells. The configurations of attached human pulpal cells were done by SEM observation. The results as follows : 1. After 90 minute incubation the score of attachment of human pulpal cells was best in laminin-coated group among groups. Then fibronectin, type IV collagen group were better, and all proteins were higher than control. 2. After 4 hour incubation the numbers of attachment of human pulpal cells were most in fibronectin coated group. 3. After 24 hour incubation all of adhesive glycoproteins showed high and similar attachemtn effect to human pulpal cells. 4. In SEM observation, fibronectin and type IV collagen groups showed well spreaded human pulpal cells, then laminin group was moderately spreaded, and vitronectin group was mildly spreaded as well as control group.

• Applied Science and Convergence Technology
• /
• v.24 no.2
• /
• pp.33-40
• /
• 2015

$ZrO_2$ and Al-Zr composite oxide film was prepared by vacuum assisted sol-gel dip coating method and anodizing. $ZrO_2$ films annealed above $400^{\circ}C$ have tetragonal structure. $ZrO_2$ layers inside etch pits were successfully coated from the $ZrO_2$ sol. The double layer structures of samples were obtained after being anodized at 100 V to 600 V. From the TEM images, it was found that the outer layer was $Al_2O_3$, the inner layer was multi-layer of $ZrO_2$, Al-Zr composite oxide and Al hydrate. The capacitance of $ZrO_2$ coated foil exhibited about 28.3% higher than that of non-coating foil after being anodized at 100 V. The high capacitance of $ZrO_2$ coated foils anodized at 100 V can be attributed to the relatively high percentage of inner layer in total thickness. The electrical properties, such as withstanding voltage and leakage current of coated and non-coated Al foils showed similar values. From the results, $ZrO_2$ and Al-Zr composite oxide is promising to be used as the partial dielectric of high voltage capacitor to increase the capacitance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1353-1356
• /
• 2004

In recent year, OLED(organic light emitted display) is used as the next generation device of FPD. OLED have been replacing the flat panel display device such as LCD, STN-LCD and TFT because this device is more efficient, economic and simple than those FPD devices, and this need not backlight system for visualization. The performance and efficiency of OLED is related with surface defect of ITO coated glass substrate. The typical surface defect of glass substrate is nonuniformity and bad surface roughness. ITO coated glass substrate is destroied for inspection about surface roughness and non-uniformity. Generally detection of the defects in the surface for ITO coated glass substrate is dependent on operator's experience. In this research, relationship between working parameter and surface non-uniformity is studied using regression analysis.