• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.13-20
• /
• 2012

In order to clarify the effect of overload on crack growth behaviors, fatigue tests for overload were carried out for round plain specimens of SM45C steel. In the experiment, typical semi-elliptical crack shape was found and further crack growth behaviors were tested. Using three types of single overload fatigue tests, Crack growth retardation phenomenon were examined. The growth rate of surface crack(da/dN) during retardation period was analyzed in terms of ${\Delta}K$ and ${\Delta}K_{eff}$. On the growth rate of surface crack analyzed by ${\Delta}K$, the dependence of overload stress levels appears. However, on the growth rate by ${\Delta}K_{eff}$ obtained by Willenborg analysis, there is a non-liner relationship between da/dN and ${\Delta}K_{eff}$ with narrow scatter band.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.64-68
• /
• 2003

The purpose of the study is to compare the efficiency of protection as a liner protective material for geosynthetics. A series of tests were conducted in this study to analyze the effects of geosynthetics against puncture loads. Various types of geosynthetics are used as a protective material. Non-woven, Geo-composite, NaBento GCL, GCL are used to create puncture failure that caused by vertically applied loads. The results indicated that combination of geosynthetics and a protective material can be subjected to bigger loads than geosynthetics and a protective material separated each other do.

• 한국구조물진단유지관리공학회 논문집
• /
• 제1권1호
• /
• pp.97-105
• /
• 1997

The major object of this study is to analyze and investigate experimentally the experimenal equation for the estimate of compressive strength of concrete. The results are as follows. The relation between maturity scaled logarithm and compressive strength of concrete can be expressed in liner equation which show an good correlation. And combined method using rebound number, pulse velocity and water cement ratio also show an excellent correlation. The equation by combined method is same as the conclusions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.192-195
• /
• 2005

Nanometer operating linear motor is difficult to control the nano-positioning because of the vibration between structures changing of mechanical friction force happened by properties of the vibration and heat caused by operating of a mover. Therefore, it is required to analysis the vibration and heat about a mover. In this paper, we will analyze the property of vibration through analyzing by using FEM a mover of linear motor developed in the non-load situation and suggest the direction of optimal design about a mover by using method of DOE, also try to find the solution to operate the linear motor stabilized through the reducing weight of mover considering the vibration.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2004년도 춘계학술발표대회논문집
• /
• pp.271-274
• /
• 2004

영상정합을 통한 의료영상 분석방법들 중 동일환자에 대한 선형적 다중모달리티 정합이 널리 이용되고 있다. 그러나 실제적으로 여러 종류의 환자영상 취득이 어렵거나 해부학적 영상정보가 손실되는 경우가 적지 않다 본 논문에서는 표준 형상을 가지는 정상인 해부학적 뇌영상에 대한 환자 기능적 뇌영상의 정합방법을 제안한다. 먼저 두 영상간 모멘트 정보 매칭 및 초기선형 변환을 수행하고, 3차원 B zier 함수 기반 free-form 변형기법을 이용한 비선형 정합을 수행하여 정합 영상간 형상 차이를 최소화한다 제안방법은 환자 기능영상의 해부학적 분석 뿐 아니라 시술전-시술중 영상정합을 통한 영상유도시술에도 확장 적용될 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.267-269
• /
• 2004

Recently, due to increasing the application of power electronic equipment, harmonics generated from the non-liner load are fairy produced. Harmonics can cause a distribution problems such as the overheating of distribution transformer, the breakdown of device and communication interference. Interest about power quality decline of distribution system is very increased. In this paper, we are measured the harmonic voltage and current of distribution system to analyze harmonic characteristics, and it is analyzed Total Harmonic Distortion(HTD). Also, we are modeled distribution system using PSCAD/EMTDC. And it is analyzed harmonic voltage and current in steady-state. The study result have been indicated the utility about harmonics analysis and modeling for distribution system.

• 에너지공학
• /
• 제28권3호
• /
• pp.10-17
• /
• 2019

국내 친환경 수소차 보급 정책에 따라 수소차와 수소충전소 인프라 개발에 대한 관련 업계의 연구는 활발하게 진행 중이다. 반면에 수소차와 수소충전소의 내구성 및 신뢰성에 직접적인 영향을 주는 기밀용 비금속 소재(라이너, 씰, 개스킷 등)의 위험성 평가 및 재료에 관한 실증 연구는 부족한 실정이다. 이에 본 연구에서는 FMEA를 활용하여 고압 수소 설비에 사용되는 비금속 부품의 라이너와 씰에 대한 위험요소를 도출한 후 심각도, 발생빈도, 검출도 등급을 점수로 환산하여 RPN값을 산정하였다. RPN의 최대값 600, 최소값 63, 평균값이 278.5로 산출되었으며, 라이너와 씰에 대한 주기적인 관리가 중요함을 확인하였다. 더불어 비금속 고무제품에 대한 수소침지와 산소노화시험을 통해 기초 자료로 활용 가능한 물리적 실험값을 제시하고자 하였다.

• 한국지반공학회논문집
• /
• 제19권6호
• /
• pp.371-378
• /
• 2003

한반도 서, 남해안 해성점토에 대하여 초기간극비와 자연함수비 및 액성한계의 물리적 특성과 압축지수와의 상관성을 규명하기 위해 비교적 신뢰성이 크다고 볼 수 있는 대형 항만 공사용 최근자료를 분석하였다. 시료교란의 정도를 분석하기 위하여 각 표본별 실내압밀시험을 실시하고 Schmertmann이 제안한 방법으로 보정하여 수정압축지수를 산정하였다. 또한 이들 자료를 토대로 실내압밀시험으로부터 얻어진 압축지수를 경험적 방법에 의하여 보정한 후 현장 처녀압축곡선과의 관계를 분석하고, 단순회귀분석, 다중회귀분석 및 비선형 회귀분석을 실시하여 최적의 회귀모델을 구한 후 해성점토에 적용할 수 있는 토질특성과 시료교란의 영향을 고려한 압축지수와의 상관 관계식을 제안하였다. 분석 결과, 시료교란의 영향을 경험적 방법으로 평가해 본 결과 현장 압축지수는 실험실 압축지수의 1.16배정도 크게 평가되었다. 해성점토의 물리적 특성과 압축지수의 상관성에 대한 최적의 회귀모형은 토질정수의 누승식 또는 지수승식 형태의 비선형회귀식이 가장 적합한 것으로 나타났다. 또한, 설계 및 실무에 보다 쉽게 적용할 수 있도록 하기 위하여 선형관계식을 사용하는 경우에는 압축지수의 상관식을 물성치의 구간에 따라 구분하여 사용하는 것이 바람직하다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권4호
• /
• pp.373-381
• /
• 2017

A Collaborative Optimization (CO) methodology for ring-stiffened composite material pressure hull of underwater vehicle is proposed. Structural stability and material strength are both examined. Lamination parameters of laminated plates are introduced to improve the optimization efficiency. Approximation models are established based on the Ellipsoidal Basis Function (EBF) neural network to replace the finite element analysis in layout optimizers. On the basis of a two-level optimization, the simultaneous structure material collaborative optimization for the pressure vessel is implemented. The optimal configuration of metal liner and frames and composite material is obtained with the comprehensive consideration of structure and material performances. The weight of the composite pressure hull decreases by 30.3% after optimization and the validation is carried out. Collaborative optimization based on the lamination parameters can optimize the composite pressure hull effectively, as well as provide a solution for low efficiency and non-convergence of direct optimization with design variables.

• 성인간호학회지
• /
• 제27권1호
• /
• pp.83-93
• /
• 2015

Purpose: This study was to investigate the relationship among the symptom recognition, health behavior compliance, and the hospital arrival time to identify factors influencing the hospital arrival time in patient with acute myocardial infarction (AMI). Methods: The subjects of this study were 200 patients with AMI in C hospital in D city. Data were analyzed using descriptive statistics, independent t-test, One way ANOVA, Pearson's correlation coefficients, and stepwise multiple liner regression tests. Results: Level of symptom recognition and health behavior compliance was low. The median value of hospital arrival time was 4.48 hours (ST-segment Elevation Ml was 2.43 hours and Non ST-segment Elevation MI was 7.83 hours). Among the studied factors, only symptom recognition had a statistically significant positive correlation with health behavior compliance (r=0.38, p<.001). Factors influencing the hospital arrival time were MI classification, diabetes mellitus (DM) and transport vehicle to the 1st hospital, and they accounted for 13% of the variance for hospital arrival time in AMI patients. Conclusion: To prevent the delay of hospital arrival time in MI patients, a more robust nursing strategic intervention according to MI classification and DM is necessary; further education on the importance of transportation utilization is also mandated.