• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.217-224
• /
• 2002

It is very important to measure and visualize the changes in the physical properties of fluid flow because this is the foundation of measurement techniques used in aerodynamics, heat transfer, plasma diagnostics, and stress analysis of transparent models. The optical methods are advantageous over probe-based techniques in the optical methods are of high speed, non-contact and are capable of providing full-field results with high spatial resolution. Therefore we propose the electronic speckle pattern interferometry(ESPI) that gives us a solution to overcome those limitations. In this paper the experimental results show qualitative and quantitative visualization of changes in the physical properties of the candle and alcohol lamp with 3D plotting. And we obtained the refractive index, mass density and temperature distribution of fluids. The results clearly show the process of flow phenomena and give the feasibility of quantitative interpretation of gasdynamics.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1213-1218
• /
• 2004

The present article reports extensive numerical results on the non-local characteristics of ultra-short pulsed laser-induced breakdowns of fused silica ($SiO_{2}$) by using the multivariate Fokker-Planck equation. The nonlocal type of multivariate Fokker-Planck equation is modeled on the basis of the Boltzmann transport formalism to describe the ultra-short pulsed laser-induced damage phenomena in the energy-position space, together with avalanche ionization, three-body recombination, and multiphoton ionization. Effects of electron avalanche, recombination, and multiphoton ionization on the electronic transport are examined. From the results, it is observed that the recombination becomes prominent and contributes to reduce substantially the rate of increase in electron number density when the electron density exceeds a certain threshold. With very intense laser irradiation, a strong absorption of laser energy takes place and an initially transparent solid is converted to a metallic state, well known as laser-induced breakdown. It is also found that full ionization is provided at intensities above threshold, all further laser energy is deposited within a thin skin depth.

• 센서학회지
• /
• 제28권6호
• /
• pp.395-401
• /
• 2019

This paper proposes a method for estimating the location of a magnetized tip that is inside a non-transparent space or body by using arrayed giant magnetoresistance (GMR) sensors. In general, an object located in such an opaque space can be detected using X-rays, magnetic fields, ultra-sonic sensors, etc., depending on its characteristics. X-ray is mostly used for medical purposes but frequent exposure to it could cause harm to patients as well as doctors. In this study, how well a GMR sensor is applicable instead of an X-ray is investigated. The sensor's voltage output is experimentally fitted to distance with a relationship of 3rd degree polynomial. To detect a small magnetized tip with 900 Oe inside a human body, a 2×2 arrayed GMR sensor and a location estimation algorithm based on information acquired from four sensors is developed. Evaluation tests show that the suggested method is applicable to limited cases with a distance less than 33-55 mm, and the location of a magnet tip is estimated relatively well with an error less than 1.5 mm.

• Structural Engineering and Mechanics
• /
• 제43권4호
• /
• pp.545-560
• /
• 2012

Design codes provide the minimum requirements for the design of code-compliant structures to ensure the safety of the life and property. As for code-exceeding buildings, the requirements for design are not sufficient and the approval of such structures is vague. In mainland China in recent years, a large number of code-exceeding tall buildings, whether their heights exceed the limit for the respective structure type or the extent of irregularity is violated, have been constructed. Performance-based seismic design (PBSD) approach has been highly recommended and become necessary to demonstrate the performance of code-exceeding tall buildings at least equivalent to code intent of safety. This paper proposes the general methodologies of performance-based seismic analysis and design of code-exceeding tall buildings in Mainland China. The PBSD approach proposed here includes selection of performance objectives, determination of design philosophy, establishment of design criteria for structural components and systems consistent with the desirable and transparent performance objectives, and seismic performance analysis and evaluation through extensive numerical analysis or further experimental study if necessary. The seismic analysis and design of 101-story Shanghai World Financial Center Tower is introduced as a typical engineering example where the PBSD approach is followed. The example demonstrates that the PBSD approach is an appropriate way to control efficiently the seismic damage on the structure and ensure the predictable and safe performance.

• 한국위성정보통신학회논문지
• /
• 제9권1호
• /
• pp.33-37
• /
• 2014

본 연구에서는 이온빔을 조사한 폴리스타일렌 기판에 일정강도의 이온빔을 조사한 경우에 발생되는 액정배향의 특성에 대해서 연구하였다. 폴리스타일렌은 기계적강도 및 절연성에서 액정표시소자의 배향막으로 사용되는 폴리이미드 계열의 대체 물질로서 주목받고 있으며, 특히 비접촉 배향에서의 가능성이 새롭게 평가되고 있는 소재이다. 이온빔을 조사하여 이방성을 발생시킨 박막의 표면에서의 액정배향상태를 편광현미경으로 관찰하고, 액정배향에 기여한 메커니즘의 규명을 위해서 XPS(X-ray photoelectron spetroscopy) 분석을 사용하였다. 분석한 결과 15초까지의 이온빔 조사는 액정의 배향을 유발하는 중요한 원인으로 작용함을 알 수 있었으며, 이온빔조사에 의한 액정의 배향방법은 고온안정성도 겸비하고 있는 것을 실험을 통해서 알 수 있었다.

• 대한화장품학회지
• /
• 제24권2호
• /
• pp.80-99
• /
• 1998

근래에 여성들의 사회진출, 외출기회의 증가 그리고 화장 연령의 저하 또는 고령화에 따라 메이크업 제품의 수요가 증가하고 있으며 더불어 색상도 그 어느 때보다 강조되고 있다. 이 때문에 화장품 회사들은 Color Trend등을 근거로 매 시즌 새로운 색상 및 정보를 제공하고 있다. 그러나 최근들어 메이크업 제품에 색상뿐 만 아니라 그의 기능, 부가가치가 더욱 거세게 요구되어지고 있다. 따라서 메이크업 제품의 기본기능에 새로운 기능들이 부가되어지는 Skin Care 개념의 경향이 급속히 이루어지고 있으며 시장에서도 여러 종류의 다양한 상품들이 제공되고 있다. 본 논문에서는 메이크업 제품의 전체적인 흐름 및 기술동향을 알아보고 메이크업 제품의 미래를 전망해 보고자 한다. 여기에 덧붙여 메이크업이 소비자에게 미치는 심리학적 측면도 고찰해 보기로 한다.

• 한국결정학회지
• /
• 제11권1호
• /
• pp.16-21
• /
• 2000

(Yb/sub x/Y/sub 1-x/)Ca₄O(BO₃)₃ single crystals where x=0.3,8,15,20% were grown by Czochralski Method. The crystals grown under the optimum conditions were transparent and colorless with good crystal form. Using polarizing microscope, crystal defects such as parasite crystals and bubbles were detected depending on the composition of melts and pulling rates. The optimum growth parameters for high quality of single crystals were 15∼20 rpm of rotation rate and 2mm/h of pulling rate at the flow rate of 2 l/min of Nitrogen gas. The relationship between crystal axes and optical axes was investigated by optical crystallographic method, polarization technique and single crystal X-ray method. From the spectroscopic measurements, it was confirmed that there were strong absorption bands at 900 and 976.4 nm and strong emission band at 976.4 nm in Yb/sup 3+/ ion doped YCa₄O(BO₃)₃ crystal. For the application of second harmonic generation of 1.064 ㎛ laser, non-linear optical devices with θ=32.32° and Ψ=0°, λ/10 of flatness and the size of 6x8x5.73 mm were fabricated from the grown YCa₄O(BO₃)₃ crystal.

• 한국전기전자재료학회논문지
• /
• 제25권1호
• /
• pp.37-43
• /
• 2012

We were studied that AZO conductive thin film can substitute for FTO electrode in dye sensitized solar cell. Three types of AZO films were deposited on soda-lime glass(AZO/glass, AZO/AZO/glass, textured AZO/AZO/glass) using RF magnetron sputtering process and investigated their properties of electrical, optical, and photoelectric conversion rate. The textured AZO/AZO/glass has the lowest resistivity of $3.079{\times}10^{-4}\;{\Omega}cm$ among other films. And the optical transmittance rate was better than both non textured AZO/AZO/glass and FTO/glass in the visible region. After manufacturing dye solar cells using the three types of AZO films, the textured AZO/AZO/glass showed the highest photoelectric conversion rate of 3.68% among AZO samples. But the transformation rate was slightly lower than FTO cells (4.52%). However, the conductive film of textured AZO/AZO/glass can be applicable to use an electrode in solar cells as cost-effective products.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1327-1332
• /
• 2014

This paper presents information about the examples of the design on Illumination of Structures(LED Light Pipe for lighthouse) in Korea. We have applied illumination by flood-lighting or facade-lighting in place of the 57 lighthouses (offshore structures) and 4 beacons. The ways of illumination of structures are using direct illumination with LED, halogen lamps and metal halide lamps, and indirect illumination with LED non-neon lamps. The illumination of structures helps a observer to identify the Aids to Navigation and w aterway. The fabricated LED Light Pipe is a transparent acrylic round bar and easy to install. The Light Pipe is arranged in two rows of L ED (78ea). It can be connected in series. It has 4 colours(Red, Green, Yellow, White). We analyzed and the horizontal divergence angle of the LED light pipe is defined as the range with 50% of maximum luminous intensity. Also, we evaluated the conspicuity on the origin al lantern and LED Light pipe for lighthouse. The field experiment was conducted in 'Yeosuguhang lighthouse' in Yeosu-city (Korea). F rom the experimental results, it was confirmed that the fabricated LED Light Pipe is clearly distinguished.

• 유통과학연구
• /
• 제13권4호
• /
• pp.21-28
• /
• 2015

Purpose - The Chinese government's policies and funds enable specialized farmers cooperatives to develop vigorously. However, the non-systematic supervision system affects the interests of farmer-members of these cooperatives, which are similar to the Korean NongHyup in many aspects but differ in their supervision systems such as distribution. Therefore, this paper aims to identify the problems of specialized farmers cooperatives, and obtain some insights from NongHyup. Research design, data, and methodology - Data were collected from farmers, the government, and cooperatives in northern China's Shandong Province (the cities of Jinan, Qingdao, Weifang, Linyi, and Heze) through a literature survey, case analysis, and comparative analysis in each city. Results - 1) Specialized farmers cooperatives should establish a transparent regulatory mechanism and be subject to dual supervision from both the Chinese government and farmers. 2) The Chinese government and civil society should offer more support to the cooperatives, and strive to change farmers' backward attitude through education and training. Conclusions - Small cooperatives could merge into large ones and undertake social responsibility through the establishment of labor unions.