• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.5
• /
• pp.556-560
• /
• 2001

Remote field eddy current testing (RFECT) with through-wall transmission characteristic is being applied to pipes ranging from small tubes of heat exchanger to natural gas supply pipelines. Cast iron pipes with nominal diameter of 100mm are used primarily as the waterline pipes. The leakage of water occurs due to defects in the pipes caused by vibration of automobiles and corrosion. But, the use of direct inspection methods such as insertion of inspection equipment inside the pipelines has been limited due to its lack of economical efficiency. Economical development of inspection equipments is possible since RFECT method can be easily employed for system integration and quantitative evaluation of both inside and outside defects. In this study, the development of underground pipeline inspection system was tarried out by using RFECT method in consideration of the characteristics of waterline network. This paper specifically describes the design and production of RFECT pipeline inspection pig using centralizer mechanism, development of remote field eddy current signal acquisition and processing software, and review of RFECT system operation procedures.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1613-1622
• /
• 2010

In this paper, the ultraprecision positioning control of an ultrasonic linear motor in a high-vacuum environment is presented. The bolt-clamped Langivin type transducer (BLT) with the 3rd longitudinal; and 6th lateral vibration modes was developed, which was excited by using the Eigen resonance frequency for two vibration modes in order to generate stable and high power. In practical applications, however, even if a geometrical design has an Eigen frequency, discordance between both mode frequencies can be generated by the contact mechanism and because of manufacturing errors as well as environmental factors. Both mode frequencies were precisely matched by adjusting the impedence. By using this method, the BLT can be driven under any environmental conditions. The nominal characteristic trajectory following(NCTF) control method was adopted to control the positioning of the system in vacuum. The developed linear motor stage show high positioning accuracy with 5 nm.

• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.95-100
• /
• 2006

The COMS(Communication, Ocean and Meteorological Satellite) EPS(Electrical Power Subsystem) is derived from an enhanced Eurostar 3000 version. Eurostar 3000 EpS is fully autonomous operation in nominal conditions or in the event of a failure and provides a high level of reconfigure capability. This paper introduces the COMS EPS preliminary design result. COMS EPS consists of a battery, a solar arrat wing, a PSR(Power Supply Regulator), a PRU(Pyrotechnic Unit), a SDAM(Solar Array Drive Mechanism) and relay and fuse brackets. COMS EPS can offer a bus power capability of 3 kW. The solar array is made of a deployable wing with two panels. One type fo solar cells is selected ad GaAs/Ge triple junction cells. Li-ion battery is base lined with ten series cell module of five cells in parallel. PSR associated to battery and solar array wing generates a power bus fully regulated at 50 V. Power bus os centralized protection and distribution by relay and fuse brackets. PRU provides power for firing actuarors devices. The solar array wing is rotated by the SADM under control of the attitude orbit control subsystem. The control and monitoring of the EPS, especially of the battery, is performed by the PSR in combination with the on-board software.

• The Journal of Information Systems
• /
• v.27 no.1
• /
• pp.153-169
• /
• 2018

Purpose Since human brains catch images faster than texts or numbers, infographics has been widely used in business in the form of "information dashboard" to enhance the efficiency of decision-making. Groupware, however, has neglected the adoption and use of infographics, in particular, in the idea generation process. Given that an overall performance of groupware-based idea generation is no better than that of the (paper-and-pencil-based) Nominal Group Technique, Jung et al. (2010) adopted the notion of infographics in the form of performance feedback to solve the productivity paradox. With the consistent results, which demonstrate beneficial effects of infographics on performance enhancement, an interesting observation that groups with the bar chart treatment performed better than groups with the dot chart treatment was made. The main purpose of this study was to find if there were a performance consistency between the outcomes from the previous study and the outcomes from the current study. Design/methodology/approach In experiment 1, we employed the same system used in the previous study (i.e., Jung et al., 2010). As individuals' contributions accumulated, the mechanism visually displayed individuals' performances two-dimensionally in the form of a bar chart or a dot chart. Then, we compared the performance outcomes from this study to the outcomes from previous study (i.e., Jung et al., 2010). In experiment 2, we modified the performance graph to test the effect of "playfulness" on performance by converting dots to car images. Then, we compared the performance outcome from experiment 2 to the outcomes from experiment 1. Findings Just like our interesting (and unexpected) finding in Jung et al.'s study (2010), the outcome confirmed a consistent superior performance of a bar chart. This implies that a bar chart is a better choice when stimulating performance with a visual aid in the context of groupware-based idea generation. Although a bar chart was criticized in a way that errors of length-area judgments are 40 ~ 250% greater than those of positional judgments along a common scale, such illusion turned out to be facilitating upward performance comparison better. Regarding Experiment 2, the outcome showed that the revised-dot graph is as good as the bar graph in terms of quantity and quality score of ideas. We attribute the performance enhancement of the resized-dot to the interaction between the motivational characteristic and the situational characteristic of playfulness because individuals in the revised-dot graph treatment performed better than individuals in the dot graph treatment. Given the order of performance (Bar >= Revised Dot > Dot) that the revised-dot treatment performed the same as (or lower than) the bar treatment, an additional research is warranted to reach to a consistent outcome.

• KDI Journal of Economic Policy
• /
• v.35 no.1
• /
• pp.63-101
• /
• 2013

'Venture firms' in Korea are the firms who are certified as 'venture', whose certification types are defined by a law ('Special Law for the Support of Venture Firms'), and therefore encompass not only the venture capital-financed companies, which are usually regarded as ventures in USA and European countries, but also other types of firms such as R&D-intensive firms and the firms with financial guarantee or loans through technology evaluation ('technology finance or loan firms'). This paper examines the differences in the Korean venture firms' growth between the venture certification types. For the empirical analysis, this paper uses the lists of venture-certified firms from 1998 to 2010 which are then linked with their financial data in Korea Enterprises Database (KED). According to the results of empirical analyses, the companies in the 'venture capital-financed firms' type show greater growth rate in sales and the number of regular employees 3 and 5 years after first venture certification than the firms in type of 'technology finance/loan firms'. Moreover, the newly certified companies in 'R&D-intensive firms' type are also showing faster growth than the 'technology finance/loan firms' since 2003 where the venture industry has undergone a consolidation phase after the blast of so-called 'IT venture bubble' in 2001~2002. These results imply that the so-called 'venture firms' in Korea are composed with heterogeneous firm groups with different characteristics and that the companies selected through market mechanism ('venture capital-financed firms') outperforms the companies selected on the basis of policy interests ('technology finance/loan firms') in terms of the growth in sales and employment. On the basis of these findings, this paper suggests that the current venture-support policy should consider the different policy demands of firms across the type of venture certification more actively and that should refocus the objective of policies on facilitating venture capital market rather than emphasizing the nominal increase in the number of venture-certified firms.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.4
• /
• pp.21-32
• /
• 2022

Steel pile foundations are widely used for offshore constructions due to their high bearing capacity and efficiency. Typically, offshore structures that have reached the end of their design life are required to be demolished. However, pile foundations are often left on site due to technical and economic limitations. The pile left on the site not only pollutes the environment, but can also cause obstacles for the construction of new structures. Therefore, research is required to completely eliminate these foundations at the site. In this study, a new type of double-wall pile foundation that can drastically reduce the pull-out load was conceptually proposed, and a series of model tests were performed to validate the performance of the double-wall pile foundation. The installation and extraction of the double-wall pile were simulated in dry sand in the model test, and the measured up-lift load was compared to that of the conventional pile. According to the result, the maximum up-lift load induced by the decommissioning of the double-wall pile was reduced by 45% when compared to the traditional pile in dense sand. This study verified the mechanism for reducing the up-lift load of the double-wall foundation and confirmed the possibility of completely decommissioning a pile that has reached the end of its nominal service life.