References
- Morita, T., Niino, T. and Asama, H., 2002, “Rotational Feedthrough Using Motor for High Vacuum Condition,” Vacuum, Vol.65, pp. 85-90. https://doi.org/10.1016/S0042-207X(01)00411-0
- Morita, T., Takahashi, S., Asama, H. and Niino, T., 2003, “Rotational Feedthrough Using an Ultrasonic Motor and Its Performance in Ultra High Vacuum Conditions,” Vacuum, Vol.70, pp. 53-57. https://doi.org/10.1016/S0042-207X(02)00704-2
- Beckert, E., Hoffmann, A. and Saffert, E., 2001, “Development of a Vertical Wafer Stage for High Vacuum Application” Microelectronic Engineering, Vol.57, pp.207-212. https://doi.org/10.1016/S0167-9317(01)00517-2
- Ueha, S., Tomikawa, Y., 1993, Ultrasonic Motors Theory and Applications, Oxford Science Publications, New York.
- Choi, B. H. and Choi, H. R., 2000, “Force / Torque Control of Ultrasonic Motor with PWM Driving Method,” Trans. of the KSME (A), Vol. 24, No. 11, pp. 2723-2731.
- Kurosawa, M., Yamada, H. and Ueha, S., 1989, “Hybrid Transducer Type Ultrasonic Linear Motor” Jpn, J. Appl. Phys., Vol.28, pp.158-160. https://doi.org/10.7567/JJAPS.28S1.158
- Kim, W.S., Yun, C.H. and Lee, S.K., 2008, “Nano Positioning of a High Power Ultrasonic Linear Motor,” Jpn, J. Appl. Phys., Vol.7, pp.5687-5692.
- Hemsel, T. and Wallaschek, J., 2000, “Survey of the Present State of the Art of Piezoelectric Linear Motors” Ultrasonics, Vol. 38, pp.37-40. https://doi.org/10.1016/S0041-624X(99)00143-2
- Qu, J.J., Tian, X. and Zhou, N.N., 2008, “Characteristics of Traveling Wave Ultrasonic Motor Under Atmosphere and Vacuum Cycle Condition.,” Vacuum, Vol.82 ,pp.1302-1305. https://doi.org/10.1016/j.vacuum.2008.03.060
- Park, M.H. and Won, C.Y., 1991, “Time Optimal Control for Induction Motor Servo System,” IEEE Trans Power Electron Vol.6, No. 3, pp.514-524. https://doi.org/10.1109/63.85886
- Workman, M.L., Kosut, R.L. and Franklin, G.F., 1987, “Adaptive Proximate Time-optimal Sevomechanisms: Continuous Time Case.” In: Proceedings of the American Motion Control conference, Minneapolis, USA, pp.589-594.
- Fujimoto, Y. and Kawamura, A., 1995, “A. Robust Servo-System Based on Two-Degree-of-Feedom Control with Sliding Mode,” IEEE Trans Ind Electron, Vol.42, No.3, pp.272-280. https://doi.org/10.1109/41.382138
- Snitka, V., 2000, “Ultrasonic Actuator for Nanometre Positioning,” Ultrasonics, Vol.38, pp. 20-25. https://doi.org/10.1016/S0041-624X(99)00086-4
- Sasaki, S., 1989, “The Effects of the Surrounding Atmosphere on the Friction and Wear Alumina, Zirconia, Silicon Carbide and Silicon Nitride,” Wear, Vol.134, pp.185-200. https://doi.org/10.1016/0043-1648(89)90068-9
- Wahyudi, Sato, K. and Shimokohbe, A., 2003 “Characteristics of Practical Control for Point-to-Point (PTP) Positioning Systems Effect of Design Parameter and Actuator Saturation on Positioning Performance,” Precs. Eng., Vol. 27, pp. 157-169. https://doi.org/10.1016/S0141-6359(02)00226-X
- Wahyudi., Sato, K. and Shimokohbe, A., 2005, “Robustness Evaluation of Three Friction Compensation Methods for Point-to-Point (PTP) Positioning Systems,” Robotics and Autonomous Systems, Vol.52, pp.247-256. https://doi.org/10.1016/j.robot.2005.03.004
- Huafeng, L., Chunsheng, Z. and Chenglin, G., 2005, “Precise Position Control of Ultrasonic Motor Using Fuzzy Control with Dead-Zone Compensation,” J. Elec. Eng. Vol.56, pp.49-52.
- Panusittikorn, W., Lee, M. and Ro, P. I., 2004, “Modeling and Slinding-Mode Control of Friction-Based Objedt Transport Using Two-Mode Ultrasonic Excitation,” IEEE Trans. Ind. Elect., Vol 51, pp.917-926. https://doi.org/10.1109/TIE.2004.831761