• Journal of Sensor Science and Technology
• /
• v.20 no.6
• /
• pp.412-419
• /
• 2011

In this paper, we used the inter-bit noise detection method in order to reduce the effects of noise light in a visible light identification system that uses a visible LED as a carrier source. A visible light identification system consists of a reader and a transponder. When the enable signal from the reader is detected, the transponder encodes the response data in RZ(Return-to-Zero) bit stream and sends response signal by modulating a visible LED. The reader detects the response signal mixed with noise light, samples the noise voltage in each blank low time between data bits of the RZ signal, and recovers the original data by subtracting the sampled noise from the received signal. In experiments, we improved the signal-to-noise ratio by 20dB using the inter-bit noise detection method.

• Journal of radiological science and technology
• /
• v.30 no.4
• /
• pp.329-334
• /
• 2007

This paper is for investigation of the noise reduction effect all 20 filters by combining Low Pass Filter(LPF) 5 kinds, High Pass Filter(HPF) 4 kinds, Median Filter(MF) 11 kinds. Noise is added to reduce noise and minimize the quality degradation in medical imaging system. We also compared Peak Signal to Noise Ratio(PSNR), Mean Square Error(MSE) for all the combinations of different filters. As a result, noise decrease appeared in the LPF3*3#1 + HPF3*3#1 + Vertical3*1 of highest filter. We confirmed noise reduction effect by applying the proposed filter combination in many fields of medical imaging applications.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.610-621
• /
• 1998

In parameter design introduced by Taguchi, we analyze a signal-to-noise(SN) ratio. The SN ratio is a function of the expected loss due to the variation of quality characteristic. In this paper, an easy way for developing SN ratios is presented, which can be used to several quality characteristics simultaneously in parameter design. To develop such multivariate SN ratios, the transformation method of the expected loss and combining techniques are employed. And the analysis of real empirical data for an application of the proposed method is also presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.5
• /
• pp.1172-1179
• /
• 1996

General adaptive noise canceller(ANC) suffers from the misadjustment of adaptive filter weights, because of the gradient-estimate noise at steady state. In this paper, an adaptive noise cancellation algorithm with speech detector which is distinguishing speech from silence and adaptation-transient region is proposed. The speech detector uses property of adaptive prediction-error filter which can filter the highly correlated speech. To detect speech region, estimation error which is the output of the adaptive filter is applied to the adaptive prediction-error filter. When speech signal apears at the input of the adaptive prediction-error filter. The ratio of input and output energy of adaptive prediction-error filter becomes relatively lower. The ratio becomes large when the white noise appears at the input. So the region of speech is detected by the ratio. Sign algorithm is applied at speech region to prevent the weights from perturbing by output speech of ANC. As results of computer simulation, the proposed algorithm improves segmental SNR and SNR up to about 4 dBand 11 dB, respectively.

• Corrosion Science and Technology
• /
• v.21 no.5
• /
• pp.360-371
• /
• 2022

Electropolishing has various parameters because an electrochemical reaction is applied. Accordingly, experiments to determine factors and levels of electropolishing conditions are in progress for various materials. The purpose of this investigation was to optimize conditions for electropolishing using the taguchi method for UNS S31603. Factors such as electrolyte composition ratio, electrolyte temperature, and electropolishing process time were selected. Electropolishing was optimized using analysis of variance (ANOVA), signal-to-noise ratio (the smaller the better characteristics), and surface analysis. Results of ANOVA revealed that only the electrolyte composition ratio among factors was effective for surface roughness. As a result of statistical analysis of the signal-to-noise ratio, the highest signal-to-noise ratio was calculated under electropolishing conditions with sulfuric acid and phosphoric acid ratio of 4:6, an electrolyte temperature of 75 ℃, and electropolishing process time of 7 minutes. In addition, the surface roughness after electropolishing under the above conditions was 0.121 ㎛, which was improved by more than 88% compared to mechanical polishing.

• Journal of Sensor Science and Technology
• /
• v.8 no.2
• /
• pp.148-153
• /
• 1999

In this paper, we developed and implemented the geological magnetic filter for the improvements of the signal to noise ratio of the magnetic detection system. Using the geological magnetic filter, we can remove the coherent noises in the time domain and improve the signal to noise ratio of the magnetic detection system. Numerical simulation results show that geological magnetic filter can excellently remove the sensor misalignment effects and the regular short range local noise as well as it delete the coherent noises. We confirmed that the geological magnetic filter improved the signal to noise ratio about 19dB and deleted the coherent noises with restoring the source magnetic signal through experiments by implemented system.

• Journal of Communications and Networks
• /
• v.16 no.6
• /
• pp.583-591
• /
• 2014

In wireless communications, knowledge of the signal-to-noise ratio is required in diverse communication applications. In this paper, we derive the variance of the maximum likelihood estimator in the data-aided and non-data-aided schemes for determining the optimal shrinkage factor. The shrinkage factor is usually the constant that is multiplied by the unbiased estimate and it increases the bias slightly while considerably decreasing the variance so that the overall mean squared error decreases. The closed-form biased estimators for binary-phase-shift-keying and quadrature phase-shift-keying systems are then obtained. Simulation results show that the mean squared error of the proposed method is lower than that of the maximum likelihood method for low and moderate signal-to-noise ratio conditions.

• Korean Journal of Optics and Photonics
• /
• v.10 no.2
• /
• pp.169-173
• /
• 1999

We have experimentally investigated the eye margin characteristics of intensity modulated 10Gb/s NRZ signals in optically amplified systems depending on optical signal-to-noise ratio and chromatic dispersion. For the practical system application, the minimum optical signal-to-noise ratio was 25 dB. We utilized the negative chirped transmitter and a dispersion compensation fiber to compensate the chromatic dispersion in single mode fiber. We found the optimum eye opening and receiver sensitivity in case of the residual dispersion of 0~+935 ps/nm.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.2
• /
• pp.329-334
• /
• 2016

In this paper, we demonstrate a Non-Foster matching method for an electrically small antenna to improve the signal-to-noise ratio (SNR) of communication link. For the experiment, we used a general FM antenna whose resonance frequency is about 52-57 MHz and a floating type Linvill negative impedance converter(NIC)-based circuit as a Non-Foster matching element. By implementing the Non-Foster circuit to cover FM band, we can achieve a wide bandwidth matching covers 40-200 MHz. Our measurement shows 3-7 dB improvement of SNR for the same bandwidth though there are several spikes which means no improvement of SNR in the band.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.953-955
• /
• 2016

Degradation is occurred in the process of the signal transmission in the image processing system due to various reasons. Degradation is noise addition in the image signal and the representative one to cause degradation is salt and pepper noise. Therefore, image restoring filter was suggested in this article to apply and process weighted value by the changes of each directional pixel upon breakdown of local mask with 8 directions in order to restore the damaged image in the environment of salt and pepper noise. In addition, peak signal to noise ratio (PSNR) was used to compare the existing method as the objective determinant standard of the improvement effect.