• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1333-1334
• /
• 2007

Page-oriented angle multiplexing Holographic data storage system is the one of promising techniques for high capacity and data transfer rate, but its size and narrow tilt margin is pointed as a demerit. To overcome this weak point, in this paper, 2-axis deck mechanism for compensation of disc is employed to Compact size Holographic Data Storage (CHDS) which consists of minimized optical components and small 2-axis actuator moving linear & angle direction. Compensation of radial/tangential disc tilt with 2-axis deck mechanism is demonstrated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.734-735
• /
• 2008

Shock absorber for rotorcraft landing gear should absorb landing impact during landing and isolate vibration to fuselage during taxiing. Double stage oleo-pneumatic shock absorber is known to have better performances than single stage oleo-pneumatic shock absorber. This paper deals with the z-direction translational acceleration at mass center, roil and pitch angular acceleration of fuselage for single and double stage oleo-pneumatic shock absorber at nose landing gear when a 6DOF rigid model is taxiing on the pound.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.709-711
• /
• 2006

According as optical storage becomes high-density, numerical aperture increases. Therefore, the shift characteristic of moving parts in an actuator for optical pickup becomes a critical design factor because of decrease in the tilt margin. The tilt angle is maximized when the position of moving parts is in a diagonal direction within a moving range. This is determined by design of structure and magnetic circuit of an actuator. Previous analysis method only predicts linear characteristics of moving parts. However, the result of shift characteristics of the moving parts considering structural and magnetic circuit's nonlinearity following the every position simultaneously shows us more realistic result. Therefore, we present analysis method considering nonlinearity of moving parts' position through FEM package using coupled-field analysis. Then, we will suggest hereafter a design guide by comparing the above results with experimental ones.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.484-487
• /
• 2006

In this paper, linear ultrasonic actuators are designed using two dimensional motions of a PMW-PT piezoelectric plate. By equalizing the natural frequencies of longitudinal and transverse vibration modes in the cantilever structure, the ultrasonic motion of the combined vibration modes are generated. We have designed two different PMN-PT actuators: one uses a tip attached on the edge of the actuator and it drives the object in the perpendicular direction of the tip. In other model, the actuator plate moves itself through stationary guides. Prototypes of the two models are manufactured and experiments results are compared to the theoretical and numerical results. The effects of structural characteristics and the friction force existing between the actuator tip and the moving object are considered. Experiments show the possibility of small size ultrasonic linear motors which can be applicable to small form factor information storage and phone camera actuators.

• MALSORI
• /
• no.57
• /
• pp.85-97
• /
• 2006

This paper suggests an algorithm that can estimate the direction of the sound source in real time. The algorithm uses the time difference and sound intensity information among the recorded sound source by four microphones. Also, to deal with noise of robot itself, the Kalman filter is implemented. The proposed method can take shorter execution time than that of an existing algorithm to fit the real-time service robot. Also, using the Kalman filter, signal ratio relative to background noise, SNR, is approximately improved to 8 dB. And the estimation result of azimuth shows relatively small error within the range of ${\pm}7$ degree.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.570-575
• /
• 2002

Servo performance of a disk drive is greatly affected by the mechanical resonance frequencies of the head gimbal assembly (HSA). It is important factor to allow broader bandwidths for servo system in improving overall drive performance. In this paper, an optimal design for ODD suspension is attempted to increase resonance frequencies in tracking direction. Initial model was designed and the design parameter was defined to the model. The mode frequency variation for the change of design parameter was observed by modal analysis using the finite element method(FEM). The sensitivity matrix was calculated from the observed data and so through sensitivity analysis, an optimized ODD suspension was designed to have the higher resonant frequency than the initial model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.187-189
• /
• 2002

This paper presents property of the squeeze mode type mount using Magneto-Rheological fluid(MR fluid). The mount can isolate multi-directional vibrations, and also effectively reduce the vibrations in a wide range of disturbance frequencies by controlling the applied magnetic field. The shape of the mount is the same that of squeeze film damper. In the present work, the performance of this mount was experimentally investigated according to changing the magnetic field strength.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.934-937
• /
• 2007

This study focused on investigating the effect of aligned cellulose fibers to the performance of EAPap actuator. The performance of EAPap is dependant on the material direction of cellulose film. Electrospinning was used to improve material directionality of EAPap. DMAc cellulose solution which cotton pulp was resolved in DMAc solvent was used for electrospinning cellulose film. To increase directionality of nano fibers, the Electrospun film was stretched by 10 % strain during drying process. Induced in-plane strain of Electrospun EAPap was proportional to the applied voltage and larger than that of spincast EAPap. It is concluded that the performance of EAPap was improved by aligning cellulose fibers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.5
• /
• pp.462-471
• /
• 1989

Two-dimensional median filters were affectively supprssing the noise in image processing with the adge smearing decreased. However, if the window were large as necessary in noise then the filter had tendency to cut off corners. An estimate of gradient was used to decide how the ouputs of the filters were calculated. For parallel to the gradient direction we used edge preserving median operation and orthogonal to that averaging subfilters over which medians were then chosen. Four different algorithms were introduced.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.63-70
• /
• 2008

In this paper, we propose a bearing redundant coordinates and decoupled PD controller for 5-axes active magnetic bearing system, which consists of two bearing parts such as three-pole hybrid active magnetic bearing for stabilize the radial direction and ring-type permanent magnetic bearing stabilizing in axial and tilting motion. Based on derived system equation with decoupled control scheme, we conduct the modal analysis and measure of modal controllability and observability.