• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.521-524
• /
• 2009

This study describes aerodynamic noise of high speed wind turbine system, which is invented as a new concept in order to reduce the torque of main shaft, for design parameters of the rotor blade. For parametric study of high speed rotor aerodynamic noise, Unsteady Vortex Lattice Method with Nonlinear Vortex Correction Method is used for analysis of wind turbine blade aerodynamic and Farassat1A and Semi-Empirical are used for low frequency noise and airfoil self noise. Parameters are chord length, twist and rotational speed for this parametric research. In the low frequency range, the change of noise is predicted the same level as each parameters varies. However, in case of broadband noise of blade, the change of rotational speed makes more variation of noise than other parameters. When the geometric angles of attack are fixed, as the rotational speed is increased by 5RPM, the noise level is increased by 4dB.

• 대한원격탐사학회지
• /
• 제37권6_3호
• /
• pp.1951-1963
• /
• 2021

농업환경 모니터링에서 지구관측위성을 활용한 원격탐사 자료는 시·공간적 그리고 효율성 측면에서 다른 방법에 비해 많은 이점을 가진다. 위성에 탑재된 센서는 태양광이 지표면에 반사되어 들어오는 에너지를 측정하므로, 지구의 대기에 의해 산란·흡수·반사되는 과정에서 잡음이 발생한다. 따라서 지표면에 반사되는 에너지(복사휘도)를 정확히 측정하기 위해서는 대기의 효과에 의한 잡음을 제거해야하는 대기보정이 선행되어야 한다. 본 연구는 KOMPSAT-3 위성의 대기보정 적용 및 농업분야 활용성 평가를 위해 대기보정 민감도 분석, 위성 상호간 교차 분석, 지상관측자료와 비교 분석을 수행하였다. 그 결과 모든 경우에서 대기보정 후 표면 반사율이 대기보정 전 TOA 반사율 보다 상호 일치율이 높게 나타났으며 동일한 기준의 시계열 식생지수 생산이 가능할 것으로 판단된다. 하지만 대기입력 파라미터의 민감도 및 위성촬영각(Tilt)에 대한 정량적인 분석을 위한 추가 연구가 필요하다.

• 대한원격탐사학회지
• /
• 제37권5_1호
• /
• pp.1013-1027
• /
• 2021

KOMPSAT-3로 촬영한 영상은 일반 카메라로 촬영한 영상과 달리 가시광선 대역의 RGB 영역뿐만 아니라 NIR, PAN Band를 추가적으로 가지고 있다. 또한, 지상 685 km의 높은 고도에서 약 17 km 이상이 되는 넓은 반경의 지역을 촬영하기 때문에 이에 따른 전기적, 광학적 특성을 고려해야 한다. 즉, KOMPSAT-3의 카메라 센서는 각 CCD 픽셀 별, 각 band 별 특성, 감도 및 시간에 따른 변화, CCD Geometry 등에 의해 왜곡 현상이 발생하는데, 왜곡 현상을 해결하기 위해 센서보정이 필수적으로 필요하다. 본 논문에서는 KOMPSAT-3 사이드 슬리더 촬영 기반 영상에서 세그먼트 기반 노이즈 분석을 통한 균일 영역을 검출하는 기법을 제안한다. 해당 알고리즘을 통해 균일 영역을 검출 후 비 균일 보정 알고리즘 적용을 위해 각 센서별로 보정 테이블을 생성한 후 생성된 보정 테이블을 이용하여 위성 영상 보정을 수행하였다. 그 결과 기존 기법 대비 제안한 기법을 통해 수직 노이즈와 같은 위성 영상의 왜곡을 감소하였으며, 영상 품질의 척도인 상대적 방사 정확성 지표에 대해서는 평균 제곱 오차를 사용한 지표(RA)와 절대오차를 이용한 지표(RE)에 대해서 기존 방법에 대비하여 각각 0.3%, 0.15% 평가 지표에서 비교 우위에 있음을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1990년도 추계학술대회논문집; 한양대학교, 서울; 24 Nov. 1990
• /
• pp.107-112
• /
• 1990

In the vibration analysis of structure in fluid such as ships and offshore structures, the hydrodynamic added mass considerably affects the result of analysis. Therefore correct evaluation of the hydrodynamic added mass effect is required for an accurate analysis. But the correct evaluation of the effect is not simple because the added mass varies with the mode shape of vibration as well as the configuration of the structure. The universal method employed to evaluate added mass in ship hull vibration is Lewis's method via the introduction of 3 dimensional correction factor. But this conventional method is valid only for beam-like vibration.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.463-467
• /
• 2003

This part of ISO 1940 covers the following: a) identification of errors in the balancing process of rigid rotors: b) assessment of errors: c) guidelines for taking into account: d) the evaluation of residual unbalance in two correction planes. Detailed consideration of errors associated with the determination of residual unbalance is covered in the first part of ISO 1940.

• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.409-421
• /
• 2003

The hierarchical recursive local-correlation PIV algorithm with CBC (correlation based correction) method was employed to increase the spatial resolution of PIV results and to reduce error vectors. The performance of this new PIV algorithm was tested using synthetic images, PIV standard images of Visualization Society of Japan, real flows including ventilation flow inside a vehicle passenger compartment and wake behind a circular cylinder with riblet surface. As a result, most spurious vectors were suppressed by employing the CBC method, the hierarchical recursive correlation algorithm improved the sub-pixel accuracy of PIV results by decreasing the interrogation window size and Increased spatial resolution significantly. However, with recursively decreasing of interrogation window size, the SNR (signal-to-noise ratio) in the correlation plane was decreased and number of spurious vectors was increased. Therefore, compromised determination of optimal interrogation window size is required for given flow images, the performance of recursive algorithm is also discussed from a viewpoint of recovery ratio and error ratio in the paper.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.75-76
• /
• 2016

This paper proposes a power factor correction circuit with a high efficiency over a wide load range characteristics for a communication power supply. And the characteristic verification is applied to produce a design of prototype. Power factor correction circuit can reduce conduction losses by applying Bridgeless Boost Converter for efficiency. Over a wide load range to maintain the efficient, the control method of a PWM controller is divided by two sections according to the load area. In the low-load region, it was reduced switching losses by applying the critical conduction mode control method. On the other hand, in the heavy-load area, the hysteresis current control method is used to maintain the high efficiency over a wide load range by limiting the peak noise of the inductor.

• 전자공학회논문지B
• /
• 제31B권4호
• /
• pp.97-105
• /
• 1994

Transform image coding using DCT is proved to be efficient in the absence of channel error but its performance degrades rapidly over noisy channel. In this paper, in the case of appling bit selcetive error correction coding that protects some significant bits in a codeword, an efficient allocation method of imformation bits and additive redundancy bits used for quantization and error correction coding respectively under constant transmission bit rate is proposed, and its performance is analyzed. As a result, without increasing trasmission bit rate, PSNR can be improved up to 7~8 [dB] below bit error rate $10^2$ and the image without blocking effect caused by bit error resulted from channel noise can be recostructed.

• 대한전자공학회논문지
• /
• 제25권2호
• /
• pp.204-210
• /
• 1988

The residue number system offers the possibility of high-speed operation and error detection/correction because of the separability of arithmetic operations on each digit. A compact residue arithmetic module named the self-checking pulse-train residue arithmetic circuit is effectively employed as the basic module, and an efficient error detection/correction algorithm in which error detection is performed in each basic module and error correction is performed based on the parallelism of residue arithmetic is also employed. In this case, the error correcting circuit is imposed in series to non-redundant system. This design method has an advantage of compact hardware. Following the proposed method, a 2nd-order recursive fault-tolerant digital filter is practically implemented, and its fault-tolerant ability is proved by noise injection testing.

• 한국컴퓨터정보학회논문지
• /
• 제22권7호
• /
• pp.39-45
• /
• 2017

In this paper, we propose three compensation methods to solve problems in high-resolution airborne infrared camera and to improve long-range target information acquisition performance. First, image motion and temporal noise reduction technique which is caused by atmospheric turbulence. Second, thermal blurring image correction technique by imperfect performance of NUC(Non Uniformity Correction) or raising the internal temperature of the camera. Finally, DRC(Dynamic Range Compression) and flicker removing technique of 14bits HDR(High Dynamic Range) infrared image. Through this study, we designed techniques to improve the acquisition performance of long-range target information of high-resolution airborne infrared camera, and compared and analyzed the performance improvement result with implemented images.