• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8C
• /
• pp.750-755
• /
• 2009

Tomlinson-Harashima precoding (THP) is considered as a prominent precoding scheme due to its capability to cancel out the known interference at the transmitter side. Therefore, the information rates achieved by THP are superior to those achieved by conventional linear precoding schemes. In this paper, a new lower bound on the achievable information rate by the regularized THP under additive white Gaussian noise (AWGN) channel with multiuser interference is derived. Analytical results show that the lower bound derived in this paper is tighter than the original lower bound particularly at low SNR range, while both lower bounds converge to the same lower limit as SNR$\rightarrow$$\infty$.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.1882-1885
• /
• 1998

This paper proposes the advanced PWM method which can reduce common-mode voltage in 3 phase PWM converter/inverter system. By shifting the zero voltage vector of inverter in a sampling period, it is possible to cancel out a common-mode voltage pulse defined by switching functions of converter and inverter. Without any loss of control performance of converter/inverter system, overall common-mode voltage can be reduced by one-third compared with that of conventional PWM scheme.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.7-10
• /
• 2003

VDSL(Very-high-rate Digital subscriber Line) have a severe FEXT(Far-End Crosstalk). This paper proposes FEXT cancelation scheme in VDSL system. The scheme is GDFE(Generalize Decision Feedback Equalizer) and Vectored-DMT (Discrete Multitone). Feedback part of GDFE decreases FEXT noise. Canceler and Precoder block a part of Vectored-DMT eliminate FEXT. After all, simulation result show improvement of transmit and receive speed.

• 전기의세계
• /
• v.15 no.5
• /
• pp.32-39
• /
• 1966

This voltage Regulator, which regulates voltage in different way from the conventional regulator, is constructed by circular-plate core type stators and controllers (are similar to rotor of conventional). The principle of this Voltage Regulator is based on the rotating magnetic field theory including peculiar homopolar and heteropolar concept. Comparing with the conventional induction regulator, this regulator need not to have short windings and can cancel armature reaction. Moreover, it is able to decrease the machine noise and control the phase of it freely. And it's efficiency can become more than 95% which almost the same as that of transformer's. By increasing numbers of cores of the same size, the output power can be increased, the insulation can be decreased and high Voltage can directly be connected because applied voltage is distributed to each core. This Voltage Regulator can be also used as a current regulator, a starter a induction motor and a phase transformer etc.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.377-380
• /
• 1996

The purpose of this paper is to improve the P-wave detection capacity using wavelet transform. The first procedure is to remove baseline drift using the median filter. The second procedure is to cancel ECG's QRS-T complex with ECG's QRS-T complex templete to get P-wave candidate. Before we cancelled out the QRS-T complex, we estimated the best matching between templete and QRS-T complex to minimize the error. Then, Harr wavelet was used to eleminate the high frequency noise of ECG wave form cancelled the QRS-T complex. Finally, P-wave was discriminated and confirmed by threshold value. By using this method, We can got the around 95.1% P-wave detection.

• Journal of Biomedical Engineering Research
• /
• v.17 no.4
• /
• pp.507-514
• /
• 1996

The automated ECG diagnostic systems in hospital have a low P-wave detection capacity in case of some diseases like conduction block. The purpose of this study is to improve the P-wave detection ca- pacity using wavelet transform. The first procedure is to remove baseline drift by subtracting the median filtered signal from the original signal. The second procedure is to cancel ECG's QRS-T complex from median filtered signal to get P-wave candidate. Before we subtracted the templete from QRS-T complex, we estimated the best matching between templete and QRS-T complex to minimize the error. Then, wavelet transform was applied to confirm P-wave. In particular, haiti wavelet was used to magnify P-wave that consisted of low frequency components and to reject high frequency noise of QRS-T complex cancelled signal. Finally, p-wave was discriminated and confirmed by threshold value. By using this method, We can got the around 95.1% P-wave detection. It was compared with contextual information.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.7
• /
• pp.45-55
• /
• 1999

In this paper, we used the WLMS(Wavelet domain Least Mean Square) adaptive filter based on the wavelet transform to cancel grain noise. Usually, grain noise occurs in changes of the crystalline structure of metals in high temperature environment. It makes the detection of flaw difficult. The WLMS adaptive filtering algorithm establishes the faster convergence rate by orthogonalizaing the input vector of adaptive filter as compared with that of LMS adaptive filtering algorithm in time domain. We implemented the WLMS adaptive filter by using the delayed version of the primary input vector as the reference input vector and then implemented the CA-CFAR(Cell Averaging- Constant False Alarm Rate) threshold estimator. CA-CFAR threshold estimator enables to detect the flaw and back echo signals automatically. Here, we used the output signals of adaptive filter as its input signal. To Cow the statistical characteristic of ultrasonic signals corrupted by grain noise, we performed run test. The results showed that ultrasonic signals are nonstationary signal, that is, signals whose statistical properties vary with time. The performance of each filter is appreciated by the signal-to-noise ratio. After LMS adaptive filtering in time domain, SNR improves to about 2-3㏈ but after WLMS adaptive filtering in wavelet domain, SNR improves to about 4-6㏈.

• KIISE Transactions on Computing Practices
• /
• v.24 no.1
• /
• pp.1-9
• /
• 2018

Low-power long-range networks (LoRa) has a comprehensive coverage of up to 30 km, so that long-range positioning is possible. However, the position error in the current LoRa environment is over 500 m. This makes it difficult to use practical location services in the LoRa environment. In this paper, we propose a method to improve the position accuracy by correcting an inaccurate visual error when sending a signal from a mobile node to a gateway through the reference node of each zone in the LoRa environment. Experiments were carried out using MATLAB, and a radio propagation algorithm, the Hata model, was used to cancel out the stationary noise and to evaluate the environmental noise. Experimental results showed that the error range decreased as the number of reference nodes increased and a mobile node approach the reference node.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.1
• /
• pp.94-101
• /
• 2000

In this paper, a multi-channel active noise control(ANC) system using subband hybrid control techniques is proposed. Subband techniques could reduce computational burden and improve the performance of ANC systems by dividing several frequency subband and adjusting adaptive filter coefficients. So it can effectively cancel noises at wanted frequency range and use lower order adaptive filter than the existing algorithms. The adjoint LMS algorithm, which prefilter the error signals instead of the divided reference signals in frequency band, is also used for adaptive filter algorithms to reduce the computational burden of the subband adaptive systems. To improve performance of the ANC system, a weighted hybrid control technique, which has weightily properties of feedforward control systems and feedback control systems, is applied. This algorithm shows higher stability and good noise attenuation property in broad band ANC systems. Computer simulations were performed to show the effectiveness of the proposed algorithm.

• Journal of Korean Port Research
• /
• v.14 no.3
• /
• pp.321-329
• /
• 2000

Welding is essential for the manufacture of a range of engineering components which may vary from very large structures such as ships and bridges to very complex structures such as aircraft engines, or miniature components for microelectronic applications. Especially, a domestic situation of the welding automation is still depend on the arc sensing system in comparison to the vision sensing system. Specially, the gap-detecting of workpiece using conventional arc sensor is proposed in this study. As a same principle, a welding current varies with the size of a welding gap. This study introduce to the fuzzy membership filter to cancel a high frequency noise of welding current, and ART2 which has the competitive learning network classifies the signal patterns the filtered welding signal. A welding current possesses a specific pattern according to the existence or the size of a welding gap. These specific patterns result in different classification in comparison with an occasion for no welding gap. The patterns in each case of 1mm, 2mm, 3mm and no welding gap are identified by the artificial neural network.