• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.125-130
• /
• 2003

This Paper describes a Nonlinear adoptive noise canceller using Neural Network for Machine Tools Controller System. Back-Propagation Learning Algorithm based MLP (Multi Layer Perceptron)is used an adaptive filters. In this Paper. it assume that the noise of primary input in the adaptive noise canceller is not the same characteristic as that of the reference input. Experimental results show that the neural network base noise canceller outperforms the linear noise canceller. Especially to make noise cancel close to realtime, Primary Input is divided by Unit and each divided pan is processed for very short time than all the processed data are unified to whole data.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.345-351
• /
• 2004

This Paper describes a nonlinear adaptive noise filter using neural network for digital controller system. Back-Propagation Learning Algorithm based MLP (Multi Layer Perceptron)is used an adaptive filters. In this paper. it assume that the noise of primary input in the adaptive noise canceller is not the same characteristic as that of the reference input. Experimental reaults show that the neural network base noise canceller outperforms the linear noise canceller. Especially to make noise cancel close to realtime, Primary input is divided by unit and each divided part is processed for very short time than all the processed data are unified to whole data.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.63-66
• /
• 1999

Echo and near-end crosstalk(NEXT) can be generated in two-wire duplex transmission. In this paper investigates how to cancel echoes of high speed communication. A pipeline algorithm is used to remove the echoes that high speed communication. It is least mean squared(LMS) algorithm based on the relaxed look-ahead concept, is focused on the pipelined LMS, and its performance is compared to that of the serial LMS algorithm. And we design pipelined adaptive filtering. In advanced of the hardware implementation with VHDL code the performance of pipelined LMS algorithm is verified by the computer simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.4
• /
• pp.481-488
• /
• 2011

In this paper, we study a novel wireless interference cancellation system(ICS) repeater based on OFDM system with phase noise analysis and performance evaluation. Recently, there were many researches about wireless repeater. The previous study is just considering the feedback channel cancellation algorithm. But, in wireless repeater system, the phase noise effect can exist at up and down converter of wireless repeater. In wireless repeater system, if there are phase noise effects, the performance of system will get worse. So, the phase noise compensator is needed in wireless repeater. Therefore, we propose adaptive phase noise compensator based on OFDM system in order to effectively cancel phase noise. In order to cancel interference, we adapt adaptive phase noise compensator in wireless repeater system. The adaptive phase noise compensator compensates phase noise effect. Therefore, in this paper, we analyze phase noise of wireless repeater based on OFDM system. In this paper, when phase noise power is -15 dBc and phase noise cutoff frequency is 100 kHz at 4QAM, the BER performance of propose algorithm is better about 4 dB than with adaptive equalizer and without phase noise compensator at $10^{-4}$.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1881-1884
• /
• 2003

In some requirements of dc motor drive circuit applications are high quality output with generation of low internal conducted EMI. However the conventional dc motor drive circuits have been usually using unbalanced circuit which generates the high conducted EMI to the frame ground. This paper presents a balanced dc motor drive circuit which is effective way to reduce the common-mode noise. The circuit balancing is to make the noise pick up or occurring in both conductor lines, signal path and return path is equal in amplitude and opposite phase so that it will cancel out in the frame ground. The common-mode conducted noise reduction of this proposed dc motor drive is confirmed by experimental results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.255-259
• /
• 2003

The noise canceling on gray image morphing with median filter is presented. The processing is that interpolate the image with B-spline, specify the distinctive points, cancel the noise by median filtering and perform the morphing. The experiment results denoise the blocking degradation as 20%, correct and present a soft morphing image processing.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.514-519
• /
• 2011

Recently, the interest in technologies for a highly efficient powertrain, i.e. a variable displacement engine or a light weight car body, to improve the fuel efficiency of automobile saving the environment has been increased. However this trend deteriorates NVH performance of a vehicle and the use of a conventional engine mounting system becomes unsatisfactory. In order to solve this dilemma, an active engine mounting system that could isolate or cancel out vibrations occurred at the powertrain was suggested. In this paper, In order to optimize the electromagnetic active engine mount performance, the actuator of the engine mount through FEM analysis and optimal design, noise and elastomer testing of the prototype through the optimal design of actuators for the electromagnetic active engine mount on the impact of the performance improvement is verified.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1206-1210
• /
• 2005

This paper presents performance improvement in optical CDMA system under the presence of beat noise using a cancellation technique. Optical fibers and atmospheric optical communications have been proposed the connection between base stations and central station. The optical signal beat noise is due to interference between lightwave, many optical waves are simultaneously incident on each receiver photodiode. Since the photodiode acts as a square-law detector, beat noise can occur in the receiver. While A two-stage cancellation technique is analyzed and verified via simulation employed here because of its system simplicity. By using the random ingredients of all user signals are estimated, the beat noise is rebuilt and removed from the intended signal. In addition to cancellation technique cancel the inherent multiuser interference (MUI) in CDMA system and nonlinear distortion (NLD) in optical system. It is performed at the receiver of the central station where the random ingredients of all user signals are estimated and the MUI and the NLD are rebuilt and removed from the received signal. The validity of the cancellation technique is theoretically analyzed and shown by numerical results. The increasing of capacity in two stage cancellation are obtained.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.23-26
• /
• 1998

This paper presents a technique to enhance TDAC in the AC-3 algorithm. To reduce block boundary noise without decreasing the performance of transform coding, new special window adopted. They improves the defect of the AC-3 algorithm that could not properly cancel aliasing in the tansient period. In addition, a fast MDCT calculation algorithm based on a fast Fourier Transform, is adopted.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.152-159
• /
• 2016

This paper describes an offset and 1/f noise cancellation technique based hall sensor signal processor. The hall sensor outputs a hall voltage from the input magnetic field, which direction is orthogonal to hall plate. The two major elements to complete the hall sensor operation are: the one is a hall sensor to generate hall voltage from input magentic field, and the other one is a hall signal process system to cancel the offset and 1/f noise of hall signal. The proposed hall sensor splits the hall signal and unwanted signals(i.e. offset and 1/f noise) using a spinning current biasing technique and chopper stabilizer. The hall signal converted to 100 kHz and unwanted signals stay around DC frequency pass through chopper stabilizer. The unwanted signals are bloked by highpass filter which, 60 kHz cut off freqyency. Therefore only pure hall signal is enter the ADC(analog to dogital converter) for digitalize. The hall signal and unwanted signal at the output of an amplifer and highpass filter, which increase the power level of hall signal and cancel the unwanted signals are -53.9 dBm @ 100 kHz and -101.3 dBm @ 10 kHz. The ADC output of hall sensor signal process system has -5.0 dBm hall signal at 100 kHz frequency and -55.0 dBm unwanted signals at 10 kHz frequency.