• Tuberculosis and Respiratory Diseases
• /
• v.56 no.6
• /
• pp.646-656
• /
• 2004

Background : The aim of this study was to elucidate the mediastinal lymphatic drainage of nonsmall- cell lung cancer (NSCLC). Methods : We retrospectively analyzed the frequency of enlarged mediastinal lymph node (LN) in 256 NSCLC patients with N2 or N3 diseases on CT scan, especially with respect to the location of primary tumor. Results : In 57 patients with right upper lobe (RUL) tumors, right lower paratracheal LN (89.5%) was the most commonly enlarged, followed by subcarinal LN (54.4%). In 61 patients with left upper lobe (LUL) tumors, left lower paratracheal (70.5%) and subaortic LNs (52.5%) were commonly enlarged. Subcarinal LN enlargement without ipsilateral superior mediastinal LN enlargement was rarely found in both upper lobe tumors; RUL 8.8%, LUL 6.6%. In patients with right or left lower lobe (RLL or LLL) tumors, the most commonly enlarged LN was subcarinal; 88.2%, 65.7%, respectively. In RLL tumors with both subcarinal and superior mediastinal LN enlargements, the frequency of ipsilateral superior mediastinal LN involvement was similar to that of bilateral superior mediastinal involvement. In LLL tumors with both subcarinal and superior mediastinal LN enlargements, bilateral superior mediastinal involvement was more frequent than ipsilateral superior mediastinal involvement. Conclusion : The results of this study suggest that both upper lobe tumors are mainly drained directly to ipsilateral superior mediastinal LNs, and that both lower lobe lesions are drained to superior mediastinal LN via subcarinal LNs.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.4
• /
• pp.279-284
• /
• 2004

This experiment was conducted to evaluate on agronomic traits of Korean local adlay (Coix lachryma L.) germplasm, 281 cultivars (lines). The largest collected cultivars was from Kyungsangbukdo (56 cultivars), and the next was in the order of Cheonlabukdo (48 cultivars), Kyungsangnamdo (44 cultivars), Kyunggido (39 cultivars) Chungcheongnamdo (23 cultivars), Kangwondo (23 cultivars), Cheonlanamdo (17 cultivars), and Chungcheongbukdo (16 cultivars) in distribution of collected region for 281 cultivars. In the growth stages, days to emergence from seeding were required $16.4{\pm}2.03$ days, days to heading from emergence was required $73.6{\pm}5.87$ days, days to ripening from heading was required $52.3{\pm}4.91$ days and cultivation period was required $142.5{\pm}5.87$ days. Culm length was $210.3{\pm}16.39$ cm, no. of tiller per plant was $10.4{\pm}2.13$, culm diameter was $11.7{\pm}1.09$ mm, fruiting position was $4.6{\pm}0.82$ node, no. of main culm node was $11.1{\pm}0.78$, degree of lodging was $5.3{\pm}3.42$ and severity of leaf blight was $56.1{\pm}0.78$ in the growth characteristics of the germplasm. In the yield of component, no. of grains per $m^2$ was $5,938{\pm}2,152$, percentage of ripening was $67.7{\pm}33.12$, 1,000 grains weight was $123.8{\pm}33.76$ g and grain weight was $473.0{\pm}207.90$ g. Grain weight was correlates significantly positively with no. of main culm node, percentage of ripening and no. of grains per $m^2$ among agronomic traits. Correlation coefficient between grain weight and 1,000 grain weight was positive, while grain weight and severity of leaf blight was significantly negative. Correlation coefficient between grain weight and days to ripening from heading was significant negatively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7B
• /
• pp.1034-1042
• /
• 2010

As many researchers have been interested in Green IT, Energy Efficient Ethernet(EEE) with rate adaptation has recently begun to receive many attention. However, the rate adaptation scheme can have different energy efficiency and delay according to the characteristics of various traffic patterns. Therefore, in this paper, we analyze the impact of different traffic patterns on the energy efficiency and delay in Ethernet with rate adaptation. To do this, firstly we design a rate adaptation simulator which consists of Poisson based traffic generator, Pareto distribution based ON-OFF generator and Ethernet node with rate adaptation by using OPNET Modeler. Using this simulator, we perform the simulation in view of the total number of switching, transmission rate reduction, energy saving ratio and average queueing delay. Simulation results show that IP traffic patterns with high self-similarity affect the number of switching, rate reduction and energy saving ratio. Additionally, the transition overhead is caused due to the high self-similar traffic.

• Korean journal of applied entomology
• /
• v.33 no.2
• /
• pp.114-121
• /
• 1994

Population densities of intermediate nymphs and egg saw of Matsucoccus thunbergianae, a major insect pest of Pinus thunbergiona in southern coastal area of Korean peninsula, were est~mated. Tree samples of ca. 10cm D.B.H. were collected from old infestation area and newly invaded area. The numben of plimaly branches per tree were not significantly different by the locality, but those of secondaly and smaller branches were smaller in old infestation area The numbers of intermediate nymphs per tree in old infestation area and in newly invaded area were 10.8 and 13.1 times more than those on the trunk, respectively Approximately between 4, 200 and 208, 500 nymphs per tree were estimated. Men secondaw and smaller bmnch samples collected from the basal part of middle crown height, or from the central or the basal part of lower crown height, the number of samples required for the emr range of 20% were 21 and 11 far 10-20cm and 20-3 crn long branches, respectively. Approx~mately 63.6% of egg sacs of the whole tree were on the trunk. The node/intemode bearing the largest branch had the highest egg sac density; including that, four adjacent nodes/intemodes had ca. 37% of egg saw on the trunk.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.11
• /
• pp.723-729
• /
• 2014

In this paper, we derive the average repair bandwidth and/or read cost for arbitrary repairable linear code ensembles. The repair bandwidth and read cost are the required amount of data and access number of nodes to restore a failed node, respectively. Here, the repairable linear code ensemble is given by such parameters as the number k of data symbols, the number m of parity symbols, and their degree distributions. We further assume that the code is systematic, and no other constraint is assumed, except possibly that the exact repair could be done by the parity check-sum relation with fully connected n=k+m storages. This enables one to apply the result of this paper directly to any randomly constructed codes with the above parameters, such as linear fountain codes. The final expression of the average repair read cost shows that it is highly dependent on the degree distribution of parity symbols, and also the values n and k.

• Journal of the Korea Convergence Society
• /
• v.8 no.12
• /
• pp.9-14
• /
• 2017

Recently, the Internet of Things are developing in accordance with the technology of implementation in low-cost, small-size, low power consumption and smart sensor that can communicate using the internet. Especially, key management researches for secure information transmission based on the Internet of Things (IoT) are actively performing. But, Internet of Things(IoT) are uses sensor. Therefore low-power consumption and small-memory are restrictive condition. As a result, managing the key is difficult as a general security measure. However, The problem of secure key management is an essential challenge For the continuous development of the Internet of things. In this paper, we propose a key distribution and management technique in secure Internet of things. In the key generation and management stage, it satisfies the conditions and without physically constrained for IoT based communication.

• Advances in aircraft and spacecraft science
• /
• v.5 no.4
• /
• pp.499-513
• /
• 2018

One of the major problems in glass fiber reinforced epoxy (GFRE) composite pipes is the durability under water absorption. This condition is generally recognized to cause degradations in strength and mechanical properties. Therefore, there is a need for an intelligent system for detecting the absorption rate and computing the mass of water absorption (M%) as a function of absorption time (t). The present work represents a new non-destructive evaluation (NDE) technique for detecting the water absorption rate by evaluating the dielectric properties of glass fiber and epoxy resin composite pipes subjected to internal hydrostatic pressure at room temperature. The variation in the dielectric signatures is employed to design an electrical capacitance sensor (ECS) with high sensitivity to detect such defects. ECS consists of twelve electrodes mounted on the outer surface of the pipe. Radius-electrode ratio is defined as the ratio of inner and outer radius of pipe. A finite element (FE) simulation model is developed to measure the capacitance values and node potential distribution of ECS electrodes on the basis of water absorption rate in the pipe material as a function of absorption time. The arrangements for positioning12-electrode sensor parameters such as capacitance, capacitance change and change rate of capacitance are analyzed by ANSYS and MATLAB to plot the mass of water absorption curve against absorption time (t). An analytical model based on a Fickian diffusion model is conducted to predict the saturation level of water absorption ($M_S$) from the obtained mass of water absorption curve. The FE results are in excellent agreement with the analytical results and experimental results available in the literature, thus, validating the accuracy and reliability of the proposed expert system.

• KIISE Transactions on Computing Practices
• /
• v.23 no.12
• /
• pp.677-683
• /
• 2017

Apache Storm is a representative real-time distributed processing system, which is able to process data streams quickly over distributed servers. Storm currently provides several stream grouping methods to distribute data traffic to multiple servers. Among them, the shuffle grouping may cause a processing delay problem and the local-or-shuffle grouping used to solve the problem may cause the problem of concentrating the traffic on a specific node. In this paper, we propose the locality-aware grouping to solve the problems that may arise in the existing Storm grouping methods. Experimental results show that the proposed locality-aware grouping is considerably superior to the existing shuffle grouping and the local-or-shuffle grouping. These results show that the new grouping is an excellent approach considering both the locality and load balancing which are limitations of the existing Storm.

• Advances in nano research
• /
• v.9 no.1
• /
• pp.1-13
• /
• 2020

In this work, the electrical potential (EP) technique with an artificial neural networks (ANNs) for monitoring of nanostructures are used for the first time. This study employs an expert system to identify size and localize hidden nano-delamination (N.Del) inside layers of nano-pipe (N.P) manufactured from Basalt Fiber Reinforced Polymer (BFRP) laminate composite by using low-cost monitoring method of electrical potential (EP) technique with an artificial neural networks (ANNs), which are combined to decrease detection effort to discern N.Del location/size inside the N.P layers, with high accuracy, simple and low-cost. The dielectric properties of the N.P material are measured before and after N.Del introduced using arrays of electrical contacts and the variation in capacitance values, capacitance change and node potential distribution are analyzed. Using these changes in electrical potential due to N.Del, a finite element (FE) simulation model for N.Del location/size detection is generated by ANSYS and MATLAB, which are combined to simulate sensor characteristic, therefore, FE analyses are employed to make sets of data for the learning of the ANNs. The method is applied for the N.Del monitoring, to minimize the number of FE analysis in order to keep the cost and save the time of the assessment to a minimum. The FE results are in excellent agreement with an ANN and the experimental results available in the literature, thus validating the accuracy and reliability of the proposed technique.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.209-218
• /
• 2005

In this paper, we present an Active Optical Network(AON) . The AON uses the Dense Wavelength Division Multiplexing(DWDM) from optical communication access network of ring type, and will be able to provide the smoothly service in the Bandwidth on Demand by using DWDM. It supports the connection of the multiple wavelength and the Sub-Carrier from the optical gigabit ethernet switch. The Wavelength Add Drop Multiplexer(WADM) extracts a specific wavelength, and composes a node of the ring network. The specific wavelength becomes demultiplexing in the Sub-Carrier and it is distributed in the user The active connection of optical gigabit ethernet switch where the distribution of access network is started and access terminal connection equipment is possible. By the BoD from the AON it compares the buffer size which changes, and it analyzes. Also the Time delay of bit compares with the throughput of server The limit of amount of time is decided. Consequently it will be able to realize the dynamic use protocol and an efficient algorithm of the network.