1 |
Altabey, W.A. (2010), "Effect of pipeline filling material on electrical capacitance tomography", Proceedings of the International Postgraduate Conference on Engineering (IPCE 2010), Perlis, Malaysia, October 16-17.
|
2 |
Altabey, W.A. (2015), "The fatigue behavior of woven-roving glass fiber reinforced epoxy under combined bending moments and internal hydrostatic pressure", Ph.D. Dissertation, Alexandria University, Egypt.
|
3 |
Altabey, W.A. (2016), "The thermal effect on electrical capacitance sensor for two-phase flow monitoring", J. Struct. Monitor. Maintenance, 3(4), 335-347.
DOI
|
4 |
Altabey, W.A. (2016a), "Detecting and predicting the crude oil type inside composite pipes using ECS and ANN", J. Struct. Monitor. Maintenance, 3(4), 377-393.
DOI
|
5 |
Altabey, W.A. (2016b), "FE and ANN model of ECS to simulate the pipelines suffer from internal corrosion", J. Struct. Monitor. Maintenance, 3(3), 297-314.
DOI
|
6 |
Altabey, W.A. (2017a), "EPC method for delamination assessment of basalt FRP pipe: Electrodes number effect", J. Struct. Monitor. Maintenance, 4(1), 69-84.
DOI
|
7 |
Altabey, W.A. (2017b), "Delamination evaluation on basalt FRP composite pipe by electrical potential change", J. Adv. Aircraft Spacecraft Sci., 4(5), 515-528.
|
8 |
Altabey, W.A., Noori, M. and Wang, L. (2018a), Using ANSYS for Finite Element Analysis: A Tutorial for Engineers, Volume I, Momentum Press, New York, U.S.A.
|
9 |
Altabey, W.A., Noori, M. and Wang, L. (2018b), Using ANSYS for Finite Element Analysis: Dynamic, Probabilistic, Design and Heat, Transfer Analysis, Volume II, Momentum Press, New York, U.S.A.
|
10 |
ANSYS, Inc. (2014), ANSYS Low-Frequency Electromagnetic analysis Guide, The Electrostatic Module in the Electromagnetic subsection of ANSYS, ANSYS, Inc., U.S.A.
|
11 |
Asencio, K., Bramer-Escamilla, W., Gutierrez, G. and Sanchez, I. (2015), "Electrical capacitance sensor array to measure density profiles of a vibrated granular bed", J. Powder Technol., 270, 10-19.
DOI
|
12 |
Athijayamani, A., Thiruchitrambalam, M., Natarajan, U. and Pazhanivel, B. (2009), "Effect of moisture absorption on the mechanical properties of randomly oriented natural fibers/polyester hybrid composite", J. Mater. Sci. Eng. A, 517(1-2), 344-353.
DOI
|
13 |
d'Almeida, J.R.M., de Almeida, R.C. and de Lima, W.R. (2008), "Effect of water absorption of the mechanical behavior of fiberglass pipes used for offshore service waters", J. Compos. Struct., 83(2), 221-225.
DOI
|
14 |
Fasching, G.E. and Smith, N.S. (1991), "A capacitive system for 3-Dimensional imaging of fluidized-beds", Rev. Sci. Instr., 62(9), 2243-2251.
DOI
|
15 |
Daoye, Y., Bin, Z., Chuanlong, X., Guanghua, T. and Shimin, W. (2009), "Effect of pipeline thickness on electrical capacitance tomography", Proceedings of the 6th International Symposium on Measurement Techniques for Multiphase Flows, J. Phys: Conference Series, 147, 1-13.
|
16 |
Ellyin, F. and Maser, R. (2004), "Environmental effects on the mechanical properties of glass-fiber epoxy composite tubular specimens", J. Compos. Sci. Technol., 64(12), 1863-1874.
DOI
|
17 |
Fasching, G.E. and Smith, N.S. (1988), "High resolution capacitance imaging system", DOE/METC-88/4083; US Dept. Energy, U.S.A.
|
18 |
Jaworski, A.J. and Bolton, G.T. (2000), "The design of an electrical capacitance tomography sensor for use with media of high dielectric permittivity", Measurement Sci. Technol., 11(6), 743-757.
DOI
|
19 |
Komai, K., Minoshima, K., Shibutai, T. and Nomura, T. (1989), "The influence of water on the mechanical properties and fatigue strength of angle-ply carbon/epoxy composites", JSME Int. J. Series. 1, Solid Mechanics, Strength of Materials, 32(4), 588-595.
DOI
|
20 |
Lundgren, J.E. and Gudmundson, P. (1994), "Moisture absorption in glass-fibre/epoxy laminates with transverse matrix cracks", J. Compos. Sci. Technol., 59(13), 1983-1991.
|
21 |
Maggana, C. and Pissis, P. (1999), "Water sorption and diffusion studies in an epoxy resin system", J. Polym Sci., Part B: Polym Phys., 37(11), 1165-1182.
DOI
|
22 |
McKague, Jr. E.L., Reynolds, J.D. and Halkias, J.E. (1976), "Moisture diffusion in fiber reinforced plastics", J. Eng. Mater. Technol., 98(1), 92-95.
DOI
|
23 |
Peyser, P. and Bascom, W.B. (1981), "The anomalous lowering of the glass transition of an epoxy resin by plasticization with water", J. Mater Sci., 16(1), 75-82.
DOI
|
24 |
Abouelwafa, M.N., El-Gamal, H.A., Mohamed, Y.S. and Al-Tabey, W.A. (2014), "An expert system for life prediction of woven-roving GFRE closed end thick tube subjected to combined bending moments and internal hydrostatic pressure using artificial neural network", J. Adv. Mater. Res., 845, 12-17.
|
25 |
Mohamad, E.J., Rahim, R.A., Leow, P.L., Fazalul, Rahiman, M.H., Marwah, O.M.F., Nor Ayob, N.M., Rahim, H.A. and Mohd Yunus, F.R. (2012), "An introduction of two differential excitation potentials technique in electrical capacitance tomography", J. Sensors Actuators A, 180, 1-10
DOI
|
26 |
Mohamad, E.J., Rahim, R.A., Rahiman, M.H.F., Ameran, H.L.M., Muji, S.Z.M. and Marwah, O.M.F. (2016), "Measurement and analysis of water/oil multiphase flow using Electrical Capacitance Tomography sensor", J. Flow Measurement Instrumentation, 47, 62-70.
DOI
|
27 |
Pei, T. and Wang, W. (2009), "Simulation analysis of sensitivity for electrical capacitance tomography", Proceedings of 9th International Conference on Electronic Measurement and Instruments (ICEMI 2009), Beijing, China, August.
|
28 |
Perreux, D. and Suri, C. (1997), "A study of a coupling between the phenomena of water absorption and damage in glass/epoxy composite pipe", J. Compos. Sci. Technol., 57(9-10), 1403-1413.
DOI
|
29 |
Li, H. and Huang, Z. (2000), Special Measurement Technology and Application, Zhejiang University Press, Hangzhou, China.
|
30 |
Prian, L. and Barkatt, A. (1999), "Degradation mechanism of fiber-reinforced plastics and its implications to prediction of long-term behavior", J. Mater. Sci., 34(16), 3977-3989.
DOI
|
31 |
Sardeshpande, M.V., Harinarayan, S. and Ranade, V.V. (2015), "Void fraction measurement using electrical capacitance tomography and high speed photography", J. Chem. Eng. Res. Design, 9(4), 1-11.
|
32 |
Springer, G.S. (1981), "Environmental effects", Environmental Effects on Composite Materials, Volume 3, Technomic Pub. Co., Lancaster, United Kingdom.
|
33 |
Altabey, W.A. and Noori, M. (2017), "Detection of fatigue crack in basalt FRP laminate composite pipe using electrical potential change method", 12th International Conference on Damage Assessment of Structures, IOP Conf. Series: J. Physics, 842(1), 012079, Japan, July.
|
34 |
Agari, Y., Anan, Y., Nomura, R. and Kawasaki, Y. (2007), "Estimation of the compositional gradient in a PVC/PMMA graded blend prepared by the dissolution-diffusion method", Polym., 48(4), 1139-1147.
DOI
|
35 |
Al-Tabey, W.A. (2012), Finite Element Analysis in Mechanical Design Using ANSYS: Finite Element Analysis (FEA) Hand Book for Mechanical Engineers with ANSYS Tutorials, LAP Lambert Academic Publishing, Germany.
|
36 |
Altabey, W.A. and Noori, M. (2017), "An extensive overview of lamb wave technique for detecting fatigue damage in composite structures", J. Ind. Syst. Eng., 2(1), 1-20.
|
37 |
Altabey, W.A. and Noori, M. (2018), "Fatigue life prediction for carbon fiber/epoxy laminate composites under spectrum loading using two different neural network architectures", J. Sustain. Mater. Struct. Syst., 3(1), 53-78.
|
38 |
Yang, W.Q., Beck, M.S. and Byars, M. (1995b), "Electrical capacitance tomography-from design to applications", Measurement Control, 28(9), 261-266
DOI
|
39 |
Xie, C.G., Huang, S.M., Hoyle, B.S., Thorn, R., Lenn, C., Snowden, D. and Beck, M.S. (1992), "Electrical capacitance tomography for flow imaging: System model for development of image reconstruction algorithms and design of primary sensors", IEEE Proceedings-G (Circuits, Devices and Systems), 139(1), 89-98.
DOI
|
40 |
Yang, W.Q., Stott, A.L., Beck, M.S. and Xie, C.G. (1995a), "Development of capacitance tomographic imaging systems for oil pipeline measurements", Rev. Sci. Instruments, 66(8), 4326.
DOI
|
41 |
Zamri, M.H., Akil, H.M., Abu Bakar, A., Ishak, Z.A.M. and Wei Cheng, L. (2011), "Effect of water absorption on pultruded jute/glass fiber-reinforced unsaturated polyester hybrid composites", J. Compos. Mater., 46(1), 51-56.
DOI
|
42 |
Zhang, W., Wang, C., Yang, W. and Wang, C. (2014), "Application of electrical capacitance tomography in particulate process measurement-A review", J. Adv. Powder Technol., 25(1), 174-188.
DOI
|
43 |
Zhao, Y., Noori, M., Altabey, W.A. and Wu, Z. (2018), "Fatigue damage identification for composite pipeline systems using electrical capacitance sensors", J. Smart Mater. Struct., doi.org/10.1088/1361-665X/aacc99.
DOI
|