• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.1153-1156
• /
• 2017

이 논문에서는 투자비용 감소를 위해 라즈베리파이와 아두이노로 구현한 IoT 플러그를 제안한다. 기존 연구에서는 노후화된 시설에 대해 큰 비용이 발생하며, 전력소모량을 측정하는데 오차가 있다. 노후 시설에 대한 투자비용을 줄이기 위해 가격이 저렴한 라즈베리파이와 아두이노를 이용하여 IoT 플러그를 구현한다. 라즈베리파이 상에 서버를 구현하고 사용자와 nodeMCU 사이의 통신을 담당한다. nodeMCU는 릴레이모듈과 스위치에 연결되어 자동/수동으로 전원을 제어할 수 있다.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.636-641
• /
• 2018

In recent years, the Internet of things has grown rapidly and is being used in many fields. The function of an Internet device isto collect information in various environments and to provide useful information to users. Due to recent developments in technology, the kinds of Internet devices are increasing and the prices are getting cheaper. In addition, many open source platforms that are easy to use have been developed and are providing convenience to users. In this paper, wireless data transmission and cloud server system based on ESP-12E NodeMCU module was designed and sensor information collected from Internet devices was transmitted to cloud server through WiFi wireless communication. The collected sensor data was saved by creating channel and field in the cloud server and the data of each field was visualized as a graph.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.7
• /
• pp.1302-1308
• /
• 2010

In this study, Zigbee Sensor Node to transmit harmful gases CO and $CO_2$ information using wireless communication within the ground and underground structures were developed. Wireless communication protocol was used Zigbee Stack included IEEE 802. 15.4 MAC protocol. For wireless transmission of detected harmful gas signal from ADC of MCU was implemented Zigbee Sensor Node that was developed protocol using Serial-Port-Profile(SPP) here. The proposed Zigbee Sensor Node was verified transmission distance from experiments. Transmission distance was into 90m in experiments. Distance experiments were measured at 10m intervals using sine & pulse wave input signal at indoors. The proposed Route Sensor Node was applied mesh routing protocol. When built up USN(Ubiquitous Sensor Network)using Route Sensor Node, transmission distance was not limited. On the experimental results, harmful gas values between direct measurements and USN measurements were consistent. The semiconductor CO sensor and N-DIR $CO_2$ sensor module as a harmful sensor was used. Therefore, the proposed Zigbee Sensor Node was verified about reliability and validity to build USN for transmission of harmful gas information.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.141-144
• /
• 2024

이 논문은 현대의 불규칙한 기후 환경에 주요한 영향을 미치는 탄소 배출을 감소시키기 위한 현실적인 방안을제공하고자 한다. 우산 대여시스템은 일회용 우산구매 시 사용 절제를 장려할 수 있는 시스템으로, 사용 시 지속해서 탄소 배출을 감소시킬 수 있다. 사용자는 자신이 위치한 곳에 가까운 대여소를 애플리케이션으로 선택 후 대여가 가능하며 대여한 곳과 다른 대여소에도 반납할 수 있다. 지난 몇 년간 시행됐던 아날로그식에 단점인 회수율을 시민의식이라는 신념에만 의존하지 않고 NFC 보안과 Node MCU 통신 탑재를 통해 효율적으로 다양한 상업이나 공공기관에서 확장될 수 있을 것으로 기대한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.144-155
• /
• 2013

This paper presents a low-cost remote power-quality-failure monitoring system (RPMS) using Android App and TI MCU (micro-controller unit), which is appliable to a micro-grid. The designed RPMS testbed consists of smart nodes, a server, and Android APPs. Especially, the C2000-series MCU-based RPMS smart node that is low-cost compared to existing monitoring systems has both a signal processing function for power signal processing and a data transmission function for power-quality monitoring data transmission. The signal processing function implements both a wavelet-based power failure detection algorithm including sag, swell, and interruption, and a FFT-based power failure detection algorithm including harmonics such that reliable and real-time power quality monitoring is guaranteed. The data transmission function implements a low-complexity RPMS transmission protocol and defines a simple data format (msg_Diag) for power monitoring message transmission. We may watch the monitoring data in real time both at a server and Android phone Apps connected to the WiFi network (or WAN). We use RS-232 (or Bluetooth) as the wired (or wireless) communication media between a server and nodes. We program the RPMS power-quality-failure monitoring algorithm using C language in the CCS (Code Composer Studio) 3.3 environment.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.3 no.1
• /
• pp.34-41
• /
• 2008

There are many researches to build up ubiquitous environment by the Ubiquitous Sensor Network(USN). These applications, such as home network, health care, natural environment and agricultural areas, are implemented by an embedded system. Their fields are gradually spreading. However the power consumption in its implementation plays an important role on the surrounding environment of the wireless network. In this paper, we design low power processor based sensor node platform for agricultural applications. We also compare its some performance with existing products.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.5
• /
• pp.207-215
• /
• 2014

In this paper, we propose a Micro Real-Time Control System (MRTCS) for decreasing the delay during interrupts processing and data transfer on sensor nodes. The MRTCS consists of a control, sensor nodes based on Controller Area Network (CAN) device. The control node was designed with Real Time Operating System (RTOS) on top of the small Micro Control Unit (sMCU). Sensor nodes have the CAN device without sMCU, which have multiple Digital Inputs, Outputs (DI/DO) and the CAN controller. We have evaluated with OCTAVE v3.6.4 from open source for system performance. Simulation results show that the system performance was increased through the delay reducing for interrupt processing and internal data transfer. We verify that a proposed MRTCS approach will be adapted to various real-time control system.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.190-193
• /
• 2009

The most essential element in wireless sensor network is wireless sensor node which collects environmental information and transmits it to the user application systems. Recently, due to the technological advancement, wireless sensor nodes are become smaller, more intelligent and less power consuming. Especially, SoC(System-on-Chip) technology, which unifies the MCU, RF module, memory and other element inside one chip, plays an important part for miniaturization of sensor node, hence reduces the manufacturing expenses. In this paper, we have designed a miniaturized wireless sensor node for wireless sensor network using commercial SoC technology and discussed about some application scenario and additional considerations.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.3
• /
• pp.151-156
• /
• 2012

When mounting the sensor device in the way of Plug&Play, sensor device drivers need to be loaded and linked dynamically. Since a sensor node platform is based on small 8 bit MCU, dynamic loading and linking technique used in Windows and Linux can not be applied. In this paper, we present how to link and load dynamically sensor device drivers for sensor device Plug&Play. We implement a prototype and evaluate it to make sure that there is no performance degradation like sensor device driver connection speed and memory usage. Connection speed overhead increases to 0.2ms. Memory usage overhead increases to hundreds byte. It shows that there is no heavy influence in running the actual program.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.211-218
• /
• 2018

Recently, various technologies related to IIoT are introduced continuously due to the spread of IoT and smart factory industries. This paper proposes the construction of a two-way wireless network system for monitoring plant equipment using these various technologies. The main technologies used in this thesis are design techniques for micro sensor nodes to monitor facility conditions at various sites, MQTT technology for wireless communication between local server and sensor nodes and Node-RED based design technologies, which store data collected and can be easily presented to users via wired and wireless wires. In addition, a wireless two-way camera system was also implemented in which the screen images of the site can be viewed in the situation room according to the instructions of the situation room when determining abnormal conditions.