• Journal of Multimedia Information System
• /
• v.9 no.2
• /
• pp.121-126
• /
• 2022

The shortest path betweenness value of a node quantifies the amount of information passing through the node when all the pairs of nodes in the network exchange information in full capacity measured by the number of the shortest paths between the pairs assuming that the information travels in the shortest paths. It is calculated as the cumulative of the fractions of the number of shortest paths between the node pairs over how many of them actually pass through the node of interest. It's possible for a node to have zero or underrated betweenness value while sitting just next to the giant flow of information. These nodes may have a significant influence on the network when the normal flow of information is disrupted. We propose a betweenness centrality measure called collective betweenness that takes into account the surroundings of a node. We will compare our measure with other centrality metrics and show some applications of it.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.4
• /
• pp.990-1004
• /
• 1995

A modified 16-node element for composite plate has been proposed and compared with the 20-node element to check the validity of it. The fields of numerical inspection include mode analysis and specific damping analysis. By symetrizing the conventional unsymmetric damping matrix in the analysis of specific damping capacity, we could compute the specific damping capacity and make a program, effectively. In addition, we could predict the errors caused by reduction of integration order in thickness direction depending upon the number of layers.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.3
• /
• pp.137-145
• /
• 2011

Due to architectural requirement, the attention of single layered freeform spatial structure is increasing nowadays. Because the node of single layered structure should resist the bending and axial forces simultaneously, it is necessary to develop a new proper type of node in detail. In this study, a new type of node for single layered freeform spatial structure was proposed. And the structural performance for the node was analytically evaluated using the commercial FEM software(ABACUS). As a result, a node prototype was selected and the proposed node showed good structural behaviors.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.2
• /
• pp.144-149
• /
• 2006

This paper describes a novel automated analysis system for bellows of piping system. An automatic finite element (FE) mesh generation technique, which is based on the fuzzy theory and computational geometry technique, is incorporated into the system, together with one of commercial FE analysis codes and one of commercial solid modelers. In this system, a geometric model, i.e. an analysis model, is first defined using a commercial solid modelers for 3-D shell structures. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well controlled by the fuzzy knowledge processing. The Delaunay triangulation technique is introduced as a basic tool for element generation. The triangular elements are converted to quadrilateral elements. Practical performances of the present system are demonstrated through several analysis for bellows of piping system.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.1
• /
• pp.58-63
• /
• 2006

This paper describes a novel automated analysis system for bellows of piping system. An automatic finite element (FE) mesh generation technique, which is based on the fuzzy theory and computational geometry technique, is incorporated into the system, together with one of commercial FE analysis codes and one of commercial solid modelers. In this system, a geometric model, i.e. an analysis model, is first defined using a commercial solid modelers for 3-D shell structures. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well controlled by the fuzzy knowledge processing. The Delaunay triangulation technique is introduced as a basic tool for element generation. The triangular elements are converted to quadrilateral elements. Practical performances of the present system are demonstrated through several analysis for bellows of piping system.

• Smart Structures and Systems
• /
• v.20 no.6
• /
• pp.729-737
• /
• 2017

Piezoelectric composite laminates are a powerful material system that offers vast options to improve structural behavior. Successful design of piezoelectric adaptive structures and testing of control laws call for highly accurate, reliable and numerically efficient numerical tools. This paper puts focus onto linear and geometrically nonlinear static and dynamic analysis of smart structures made of such a material system. For this purpose, highly efficient linear 3-node and 4-node finite shell elements are proposed. Both elements employ the Mindlin-Reissner kinematics. The shear locking effect is treated by the discrete shear gap (DSG) technique with the 3-node element and by the assumed natural strain (ANS) approach with the 4-node element. Geometrically nonlinear effects are considered using the co-rotational approach. Static and dynamic examples involving actuator and sensor function of piezoelectric layers are considered.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.2
• /
• pp.87-93
• /
• 2009

In this paper, we propose and evaluate the availability of single sensor node using a hierarchial modeling approach. We divides a sensor node into a software and hardware and analyze failures of each component. We construct Markov chains to represent the components of a sensor node, and then we construct a hierarchical model which use fault tree in upper level and Markov chains in lower level. We evaluate the availability and down of single sensor node.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.13
• /
• pp.5371-5375
• /
• 2014

Background: An accurate assessment of potential lymph node metastasis is important for the appropriate treatment of early gastric cancers. Therefore, this study analyzed predictive factors associated with lymph node metastasis and identified differences between mucosal and submucosal gastric cancers. Materials and Methods: A total of 518 early gastric cancer patients who underwent radical gastrectomy were reviewed in this study. Clinicopathological features were analyzed to identify predictive factors for lymph node metastasis. Results: The rate of lymph node metastasis in early gastric cancer was 15.3% overall, 3.3% for mucosal cancer, and 23.5% for submucosal cancer. Using univariate analysis, risk factors for lymph node metastasis were identified as tumor location, tumor size, depth of tumor invasion, histological type and lymphovascular invasion. Multivariate analysis revealed that tumor size >2 cm, submucosal invasion, undifferentiated tumors and lymphovascular invasion were independent risk factors for lymph node metastasis. When the carcinomas were confined to the mucosal layer, tumor size showed a significant correlation with lymph node metastasis. On the other hand, histological type and lymphovascular invasion were associated with lymph node metastasis in submucosal carcinomas. Conclusions: Tumor size >2 cm, submucosal tumor, undifferentiated tumor and lymphovascular invasion are predictive factors for lymph node metastasis in early gastric cancer. Risk factors are quite different depending on depth of tumor invasion. Endoscopic treatment might be possible in highly selective cases.

• Coupled systems mechanics
• /
• v.5 no.1
• /
• pp.59-86
• /
• 2016

This paper deals with the free vibration analysis of a dynamical coupled system: flexible gravity dam- compressible rectangular reservoir. The finite element method is used to compute the natural frequencies and modal shapes of the system. Firstly, the reservoir and subsequently the dam is modeled by classical 8-node elements and the natural frequencies plus modal shapes are calculated. Afterwards, a new 21-node element is introduced and the same procedure is conducted in which an efficient method is employed to carry out the integration operations. Finally, the coupled dam-reservoir system is modeled by solely one 21-node element and the free vibration of dam-reservoir interaction system is investigated. As an important result, it is clearly concluded that the one high-order element treats more precisely than the eight-node elements, since the first one utilizes fifth-degree polynomials to construct the shape functions and the second implements polynomials of degree two.

• Journal of Gastric Cancer
• /
• v.12 no.4
• /
• pp.210-216
• /
• 2012

Purpose: To assess independent prognostic factors for lymph node-negative metastatic gastric cancer patients following curative resection is valuable for more effective follow-up strategies. Materials and Methods: Among 1,874 gastric cancer patients who received curative resection, 967 patients were lymph node-negative. Independent prognostic factors for overall survival in lymph node-negative gastric cancer patients grouped by tumor invasion depth (early gastric cancer versus advanced gastric cancer) were explored with univariate and multivariate analyses. Results: There was a significant difference in the distribution of recurrence pattern between lymph node-negative and lymph nodepositive group. In the lymph node-negative group, the recurrence pattern differed by the depth of tumor invasion. In univariate analysis for overall survival of the early gastric cancer group, age, macroscopic appearance, histologic type, venous invasion, lymphatic invasion, and carcinoembryonic antigen level were significant prognostic factors. Multivariate analysis for these factors showed that venous invasion (hazard ratio, 6.695), age (${\geq}59$, hazard ratio, 2.882), and carcinoembryonic antigen level (${\geq}5$ ng/dl, hazard ratio, 3.938) were significant prognostic factors. Multivariate analysis of advanced gastric cancer group showed that depth of tumor invasion (T2 versus T3, hazard ratio, 2.809), and age (hazard ratio, 2.319) were prognostic factors on overall survival. Conclusions: Based on our results, independent prognostic factors such as venous permeation, carcinoembryonic antigen level, and age, depth of tumor invasion on overall survival were different between early gastric cancer and advanced gastric cancer group in lymph node-negative gastric cancer patients. Therefore, we are confident that our results will contribute to planning follow-up strategies.