• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.82-86
• /
• 1990

A camera type optical bench system equipped with a lens collimator and an image analyzer is fabricated to measure the equivalent focal length and distortion of lenses. This system is automatized by the computer which controls stepping motors. A nodal slide optical bench system equipped with an off axis reflective collimator is fabricated and improved by using rotating arms and air bearing system. distortion measurement on a wide angle lens using the camera method and the nodal slide method is reported. Defocusing error in the distortion measurement with the nodal slide optical bench is analyzed and improved by iteration method to search the correct image point.

• Journal of Advanced Marine Engineering and Technology
• /
• 제14권4호
• /
• pp.46-56
• /
• 1990

Stress analysis of axi-symetric body with non-symetric loading and non-symetric given displacements is investigated in this paper using the finite element method. As the non-symetric load and non-symetric given displacements of axi-symetric body are generally periodic functions of angle .theta., the nodal forces and nodal displacements can be expanded in cosine and sine series, that is, Fourier series. Furthermore, using Euler's formula, the cosine and sine series can be converted into exponential series and it is prooved that the related calculus become more clear. Substituting the nodal displacements expanded in Fourier series into the strain components of cylindrical coordinates system, the element strains are expressed in series form and by the principal of virtual work, the element stiffness martix and element load vector are obtained for each order. It is also showed that if the non-symetric loads are even or odd functions of angle ${\theta}$ the stiffness matrix and load vector of the system are composed with only real numbers and relatively small capacity fo computer memory is enough for calculation.

• 한국농공학회지
• /
• 제33권2호
• /
• pp.94-103
• /
• 1991

This study was carried out to investigate the engineering characteristics of the R.C circular ring sector plate with various boundary conditions and then to propose a rational and paraical method for application of finite element method to R.C structures. The stiffness matrix of the circular ring sector plate was obtained by using the multi-base coordinate system in which the base-coordinate systems were constructed for each nodal point of the quadrilateral element in order to reflect the complicated boundary conditions conveniently and correctly. The R.C element stiffness matrix was constructed by adding the stiffness coefficients of the steel-bar element into the plate bending element stiffness matrix. Herein, the steel-bar element was treated as the common beam element. Using the above method, the effects of steel-bar can be considered without increasing of the numbers of element and nodal points.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권3호
• /
• pp.353-361
• /
• 1998

The study on the vibration characteristics of annular sector plates is important for structural engineers. In this study the vibration modes and their natural frequencies of annular sector plates clamped along the inner circumferential edge are obtained by the time average holographic interferometer according to the varying sector angle. The experimental results agree well with those obtained by the numerical analysis. The vibration characteristics of annular sector plates shows great dependence on the sector angle. The radial nodal lines converge to the center of annular sector plate.

• 한국해양학회지:바다
• /
• 제12권3호
• /
• pp.234-238
• /
• 2007

현재까지 우리나라에선 연구자마다 각기 다른 세 가지 조석지각 기준(관측지점 경도 기준 지각, 표준시 자오선 기준 지각, 그리니치 자오선 기준 지각)을 사용하여 오고 있다. 이처럼 통일되지 않는 조석지각 정보체계는 전체적인 우리나라 조석의 특성이나 변화를 이해하는데 장애가 되고 있다. 이 연구에서는 올바른 조석지각 기준의 상호전환과 관련하여, 세 가지 지각기준에 관하여 자세히 살펴보았다. 이에 앞서 조석 조화분해 과정에서 분조의 지각이 어떻게 계산되며, 조석예측프로그램에선 계산된 지각이 어떻게 사용되게 되는지 살펴보았다. 또한 이것을 바탕으로 과거 일부 연구에서 불명확하게 기술된 조석지각의 정의에 관하여 논의하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 추계학술발표회논문집(1)
• /
• pp.39-44
• /
• 1996

A nodal transport method based on the F$_{N}$ method is developed for the transport calculation in x- y geometry and tested for benchmark problems. Using transverse integration, the two-dimensional transport equation is converted to one-dimensional equations for x, y-directions and the one-dimensional equations are integrated over azimuthal angle. With proper approximations for the transverse leakage, the one-dimensional equations are discretized by using the F$_{N}$ method without truncation error. At present, isotropic approximation of the transverse with a quadratic or flat shape in spatial variable is tested.ted.

• Ocean Systems Engineering
• /
• 제12권4호
• /
• pp.385-402
• /
• 2022

This paper deals with the study of hydrodynamic pressure in reservoir adjacent to the concrete gravity dam subjected to dynamic excitation. Widely famous finite element method is used to discretize the reservoir domain for modelling purpose. Pressure is considered as nodal variable following Eulerian approach. A suitable nonreflecting boundary condition is applied at truncated face of reservoir to make the infinite reservoir to finite one for saving the computational cost. Thorough studies have been done on generation of hydrodynamic pressure in reservoir with variation of different geometrical properties. Velocity profile and hydrodynamic pressure are observed due to harmonic excitation for variation of inclination angle of dam reservoir interface. Effect of bottom slope angle and inclined length of reservoir bottom on hydrodynamic pressure coefficient of reservoir are also observed. There is significant increase in hydrodynamic pressure and distinct changes in velocity profile of reservoir are noticeable for change in inclination angle of dam reservoir interface. Change of bottom slope and inclined length of reservoir bottom are also governing factor for variation of hydrodynamic pressure in reservoir subjected to dynamic excitation.

• 소음진동
• /
• 제8권3호
• /
• pp.477-484
• /
• 1998

An analytical procedure on the base of the substructure synthesis and assumed modes method is developed to investigate the flexibility effect of bladed disk assembly on vibrational modes of flexible rotor system. In modeling the system, Coriolis forces, gyroscopic moments, and centrifugal stiffening effects are taken into account. The coupled vibrations between the shaft and bladed disk are then extensively investigated through the numerical simulation of simplified models, with varying the shaft rotational speed and the prewist and stagger angles of the blade. It is found that the Coriolis and inertia forces and the inertia torque, which are induced by the one nodal diameter modes of the bladed disk and vary depending upon the stagger and prewist angles, lead to the coupled motions of the shaft and the bladed disk.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
• /
• pp.414-421
• /
• 1996

The study of the vibration characteristics of annular sector plates which are clamped along their inner circumferential edge is important for structural engineers. The present analysis consists of experimental method and numerical method. The experimental method using time-average holographic interferometry is obtained vibration modes and frequencies. The experimental results are verified by a numerical method using F.E.M. The important aspects of the present paper is the dependence of the natural frequencies and the mode shape on the annular area changing sector angle. The radial nodal lines converge to the center of the plate. As increasing sector angle, the radial modes are predominant.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.101-109
• /
• 1997

An analytical procedure on the base of the substructure synthesis and assumed modes method is developed to investigate the flexibility effect of bladed disk assembly on vibrational modes of flexible rotor system. In modeling the system, Coriolis forces, gyroscopic moments, and centrifugal stiffening effects are taken into account. The coupled vibrations between the shaft and bladed disk are then extensively investigated through the numerical simulation of simplified models, with varying the shaft rotational speed and the pretwist and stagger angles of the blade. It is found that the Coriolis and inertia forces and the inertia torque, which are induced by the one nodal diameter modes of the bladed disk and vary depending upon the stagger and pretwist angles, lead to the coupled motions of the shaft and the bladed disk.