• The International Journal of Costume Culture
• /
• 제8권1호
• /
• pp.23-31
• /
• 2005

Mechanical properties and hand evaluation of wool/acrylic(W/A) blend knits were conducted before and after repeated washing to get the optimum W/A blending ratio, which could help achieve the optimum mechanical and hand properties of the knits. The five test fabrics using the yarns with different W/A blending ratios($\%$), 100/0, 70/30, 50/50, 30/70, 0/100, were knitted. The fabrics were washed by a rotating drum type washing machine. Then, objective mechanical and hand properties were evaluated by KES-FB, Kawabata evalution system for fabric. The results are as follows: there was no change in the hand value of the knitted fabric with the W/A-blended yarn caused by the change in the blending ratio before washing. After washing, however, the increase of acrylic's blending rate caused the bending property to decrease proportionally, while the friction coefficient of the surface property increased. Furthermore, the study showed that W/A 50/50 possesses the most superior tensile property and shearing property, which could attain the optimum blending ratio. Similar results in hand value were derived in all the samples. After washing, however, the increase in acrylic's blending rate caused a proportional decrease in KOSHI and an increase in FUKURAMI. In addition, W/A 50/50 gained the biggest NUMERI value, again corresponding to the optimum blending ratio. Similar results in total hand value were derived in all the samples before washing. After washing, though, all the total hand values decreased, and, as the wool fabric's blending rate increased, the total hand values proportionally decreased further.

• 한국가축번식학회지
• /
• 제14권4호
• /
• pp.309-313
• /
• 1990

This stduy was carried out to investigate the effect of concentration of PC12 and washing of sperm of sperm motility and acrosome reaction, and the effect of sperm incubated in mTALP solution containing PC12 112.5$\mu\textrm{g}$/ml on development of follicular oocytes matured in vitro. The results obtained were as follows. 1. When fresh sperm was once washed and then incubated in mTALP solution containing 0, 75, 112.5 and 225$\mu\textrm{g}$/ml PC12 for 15minutes, 225$\mu\textrm{g}$/ml showed significantly higher percent of acrosome reacted sperm than 0, 75, 112.5 and 225$\mu\textrm{g}$/ml. 2. When once or twice washed fresh sperm was cultured in mTALP containing 112.5$\mu\textrm{g}$/ml PC12 for 15minutes, no-washing showed significantly higher percent of motile sperm than that once- and twice-washing showed significantly higher percent of acrosome reacted seprm than no- and once-washing. 3. When sperm was cultrued in mTALP containing PC12, 112.5$\mu\textrm{g}$/ml for 15minutes and then was cocultured with bovine follicular oocytes matured in vitro, 11.2 to 22.4% of the oocytes were coleaved to more than 2cell stage.

• 한국응용과학기술학회지
• /
• 제35권4호
• /
• pp.1407-1412
• /
• 2018

본 연구는 오존화 올리브오일이 독성이 적으면서 다양한 종류의 미생물을 치사시킬 수 있으나 경우투여나 복강투여에도 인체에 해가 없는 것으로 알려져 있다. 그리고 국내에서는 아직 동물에 대한 안정성 실험이 없었다. 그래서 본 연구에서는 오존화 올리브오일을 사용하여 동물의 안구를 통한 안정성 실험을 하였다. 구체적인 연구에서는 rabbit에서 오존화오일(고농도)의 동물 눈 안점막 자극을 평가하기 위해 실시하였고, 시험물질 처치부위를 관찰한 결과, 비세척군 및 세척군 모두에서 안점막 자극이 관찰되지 않았다.

• 한국식품영양학회지
• /
• 제36권4호
• /
• pp.236-243
• /
• 2023

The purpose of this study was to investigate the effects of sterilization, storage period and washing yuzu, according to the washing method, during the storage period. The results showed that the fungus size increased as the storage period increased, and no mold occurred in the yuzu washed with ozone water until 20 days. After 30 days of storage, a mold of 124.1±13.9 mm² was observed. The no-treatment sample had a fungus of 814.5±72.8 mm² in size on day 0 and the fungus the largest fungus was 6,362±636.7 mm² on day 30. In the case of water treatment, the fungus was 286.4±31.5~4,836.4±484.6 mm² in size. The results of the study confirmed that washing yuzu with ozone water has a sterilizing effect.

• 자원리싸이클링
• /
• 제20권1호
• /
• pp.61-68
• /
• 2011

산세척을 통해 금속급 실리콘을 정련하기 위해 황산, 질산, 염산과 불산의 혼산 용액을 사용하여 $50^{\circ}C$에서 불순물의 제거 거동을 조사하였다. 금속급 실리콘에 함유된 불순물중 붕소는 산세척으로 제거되지 않았고, 농축효과로 인해 처리 후 농도가 종가하였다. 본 실험범위에서 인은 약 60% 정도 제거되었다. 황산과 질산용액으로 처리시 주요 불순 금속의 제거율은 50% 미만으로 정련 효과가 크지 않았다. 염산과 불산의 혼산으로 산세척하면 주요 불순 금속이 90% 정도 제거되었다. 각 산세척조건에서 얻은 실리콘의 순도와 주요 불순 금속들의 제거율에 대한 자료를 제시하였다.

• 펄프종이기술
• /
• 제38권4호
• /
• pp.53-60
• /
• 2006

Paper materials for long term conservation suffer slowly mechanical and chemical deterioration, the extent of which may depend upon their conservation environment. Those deterioration includes discoloring, low moisture content, acidification, and brittleness. To slow deterioration, washing treatment, deacidification, and polymer reinforcement on paper materials are usually used. One easy and simple method of fixing low moisture content and acidification was an washing method, and we used both distilled and alkali water in washing method in this study. Alkali water is electrolyzed cathode water of high pH, and has no alkali metal ions in it. Experiment showed that washing treatment with both distilled and alkali water gave improvement in raising moisture content, pH, and mechanical strength of paper materials even after severe accelerated aging test. Advantageous effect of alkali water over distilled water on preventing deterioation was also shown clearly.

• 한국의류학회지
• /
• 제29권9_10호
• /
• pp.1274-1284
• /
• 2005

Effect of fixation methods and relaxation treatment on the dimensional stability and physical properties of MDPPA/HMM treated cotton knitted fabrics were studied. Combination of four different fixation methods - relaxation, swelling agent treatment, pad dry cure fixation, and wet fixation - were applied to flame retardant finish of 4 kinds of cotton knitted fabric with MDPPA/HMM. Then these fabrics were washed 10 times. As a result, In swelling treatment on 10G showed relatively higher value of length shrinkage than 14G. Length and width shrinkage were increased by initial washing treatment and no further change was shown after 6 washing cycles. After 10 washing cycles, length and width shrinkage decreased. The KES standardized basic value of B/W, 2HB/W and bursting strength of interlock were relatively larger than those of single jersey. The values of B/W and 2HB/W of cotton knitted fabrics were increased by relaxation and washing treatment but were decreased by swelling treatment. In addition, the bursting strength of the cotton knitted fabrics was decreased after fusing, washing and relaxation treatment.

• Journal of Biosystems Engineering
• /
• 제34권4호
• /
• pp.234-242
• /
• 2009

This study was attempted to develop surface washing-system of ginseng. The effect of sterilization, washing and keeping freshness of ginseng through analyzing unit process were examined to establish optimal condition for washing system. Surface washing method of fresh ginseng used two way and full cone spray type. Sterilization was used at $2^{\circ}C$ water with electrolysis water of 50 and 80 ppm. Ginseng was sterilized with electrolysis water during 30 and 60 s, dehydrated during 1 min and dried during 1min at 30 and $50^{\circ}C$. Hardness of surface-washed ginseng showed good result on 1 min spraying time with 80 ppm electrolysis water at $10^{\circ}C$ storage. Ginseng with 80 ppm electrolysis water was sterilized better with $1.05{\times}103$. There are no changes with 0% on appearance quality at 80 ppm electrolysis.

• 한국의류학회지
• /
• 제18권1호
• /
• pp.23-30
• /
• 1994

The objective of this study was to analyze the effect of the dissolution of detergent on washing and rinsing efficiency, and the possibility of saving detergent in washing. Washing and rinsing efficiency were reviewed in three different ways : A method was to input dissolved detergent by the use of rapid detergent dissolution instrument, B method was to input dissolved detergent beforehand, and C method was to input undissolved detergent. The results were as follows 1. A method > B method > C method was shown in detergency with washing time and three method's gaps were reduced because detergent dissolution effect was reduced by mechanical action in proportion of washing time. Especially, according to detergency of A method of 0.07% and C method of 0.1% was appeared approximately, saving detergent was expected by rapid dissolution of detergent. 2. A method > B method > C method was shown in detergency with washing temperature. As the washing temperature rose, the detergent reached chemically more activated state and become easily soluble. It resulted for the detergent to penetrate and adhere to laundry easily. 3. A method > B method > C method was shown in detergency with detergent concentration and C method was more sensitive than A, B method against change of detergent cocentration. Rapid detergent dissolution made it possible not only to enhance the washing efficiency but also to save the detergent because detergency of A method in low concentration is higher than that of C method. 4. A method $\geq$ B method > C method was shown in rinsing ratio with detergent input method. It indicated input dissolved detergent was advantageous in rinsing. 5. The result of anion surfactant concentration test of each process with detergent input method was shown like that A method In B method > C method in washing and reverse result was shown in rinsing. The anion surfactant concentration of C method was low during washing but high during rinsing. This was identical with previous results which shown the washing and rinsing efficiency improved with dissolved detergent usasge. 6. C method > B method > A method was shown in the degree of remaining detergent after rinsing. There was no remaining detergent after second rinsing in A and B method, but in C method four rinsings were required for the same result. Consequently, in A and B methods, less water and electricity were used, and less abrasion of cloth.

• Carbon letters
• /
• 제3권4호
• /
• pp.198-204
• /
• 2002

In this paper, impregnated activated carbon fiber (IACF) was manufactured to pitch-based activated carbon fibers (ACF) with potassium hydroxide (KOH) by using wet impregnation method to raise nitrogen oxides ($NO_x$) adsorptivity. The properties of IACF were observed using EPMA, TGA and DSC and $NO_x$ adsorptivity was observed at high and low temperature. Before and after adsorption was analyzed using ToF-SIMS for examine surface characterization of adsorbed $NO_x$. The results showed that the better adsorptivity appeared for increasing KOH ratio. So, $NO_x$ adsorptivity showed result that is proportional between KOH and the adsorbed amount. On the other hand, adsorbent that manufactured without washing was better $NO_x$ adsorptivity than adsorbent that manufactured with washing. The behavior of adsorption show that crossing time of NO and $NO_2$ delayed for a rising adsorptivity. And NO ratio increased but $NO_2$ ratio decreased according as KOH ratio increases. $NO_x$ was confirmed through surface analysis that remain in $NO_2^-$ and $NO_3^-$ form on IACF surface.