• Journal of the Korean Wood Science and Technology
• /
• v.51 no.6
• /
• pp.493-508
• /
• 2023

Round timber materials of 600 mm length, cut from large-cross-section round timber of red pine (Pinus densiflora S. et Z.) of 450 mm width and 4.2 m length, were prepared as the target of kiln drying in this study. After treating the target materials through end sealing (ES), end sealing - kerfing (ES-K), lateral sealing - end sealing - boring (LS-ES-B), or lateral sealing - partial end sealing (LS-PES), the effects of the treatment on the incidence of drying defects were determined. The target materials with exposed lateral surface and sealed cross surface were steamed at the initial temperature of 65℃ above the official pest control temperature of 56℃, followed by kiln drying toward the final temperature of 75℃. The target materials with sealed lateral surfaces, on the other hand, were dried at the initial temperature of 90℃ at almost the maximum temperature of conventional kiln drying, as there is no risk of early check formation caused by surface moisture evaporation. The final temperature was set at approximately 100℃. The drying time, taken for the target materials with initial moisture content of 70%-80% to reach the target moisture content of 19%, varied across treatment conditions. The measured drying time was 1,146 hours (approximately 48 days) for the timber with sealed cross surface and 745 hours (approximately 31 days) for the timber with sealed lateral surface, until the moisture content reached the target level. The formation of surface checks could not be prevented in the control and ES groups, but a definite preventive effect was obtained for the LS-ES-B and LS-PES groups.

• Science of Emotion and Sensibility
• /
• v.24 no.1
• /
• pp.3-10
• /
• 2021

This study examined the effect of intentional thought avoidance(i.e., thought suppression and thought substitution) using "Think and No Think" task. Two syllable words were selected, and recall test was performed with a single subject group. recall accuracy of them was measured in two recall conditions(cue recall and target recall) and four training conditions(thought, thought suppression, thought substitution, and baseline). The results showed that recall accuracy in cue recall condition was better than in target recall condition, regardless of training conditions, and recall accuracy in thought condition was better than in other training conditions, regardless of recall conditions. Also there was significant interaction between recall and training conditions: For thought suppression. there was no difference between two recall conditions, whereas for thought substitution, recall accuracy in cue recall condition was better than in target condition. These findings indicate that thought avoidance strategies, including both thought suppression and thought substitution, are effective in avoiding the specific thought intentionally, and thought suppression and thought substitution could be applied by different mechanism.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.3
• /
• pp.177-183
• /
• 2003

Recently, Ryu et al. proposed a multiple target DOA tracking algorithm, which has good features that it has no data association problem and simple structure. But its performance is seriously degraded in the low signal-to-noise ratio. In this paper, a measurement fusion method is presented based on ML(Maximum Likelihood), and the new DOA tracking algorithm is proposed by incorporating the presented fusion method into Ryu's algorithm. The proposed algorithm has a better tracking performance than that of Ryu's algorithm, and it sustains the good features of Ryu's algorithm.

• International Journal of Aeronautical and Space Sciences
• /
• v.7 no.2
• /
• pp.1-13
• /
• 2006

The Lyapunov stability theory has been known inadequate to prove capturability of guidance laws because the equations of motion resulted from the guidance laws do not have the equilibrium point. By introducing a proper transformation of the range state, the original equations of motion for a stationary target can be converted into nonlinear equations with a specified equilibrium subspace. Physically, the equilibrium subspace denotes the direction of missile velocity to the target. By using a single Lyapunov function candidate, capturability of several PN laws for a stationary target is then proved for examples. In this approach, there is no assumption of the constant speed missile. The proposed method is expected to provide a unified and simplified scheme to prove the capturability of various kinds of guidance laws.

• The Journal of Industrial Distribution & Business
• /
• v.7 no.1
• /
• pp.19-25
• /
• 2016

Purpose - The purpose of this paper is to aim to stress the importance of doing business environment in South Korean economy. The theoretical justification is based on neo-institutional theories and new business management including Porter's Model as main justifications of state intervention due to the market failures to promote a competitive environment of doing business. Research design, data and methodology - The methods to be taken is to provide a comparative performance analysis, and offer in terms of doing business and economic freedom sub-index complemented by Korean reforms diagnostics. Results - The main results underlined the key factors explain the success of business environment in South Korea such as: a simplified registration procedures, a target tax incentives, the removal of business barriers, the improvement of legislative and regulatory framework, target reforms, property right and technical norms, good governance and the quality of institution, a role of a well-functioning legal framework, a strong competition framework, and the transparency of regulation, etc. Conclusion - A competitive environment of doing business is based on the target national strategies, appropriate reforms responding to national needs and good governance system.

• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.122-128
• /
• 2017

Korean government announced long-term railway safety investment plan for the safety improvement by 2020. But no research have been done about differential analysis on railroad safety investment and safety improvement. In this study, recent 10 year data on safety investments and accident data are analysed for the differential analysis. Three main safety investments are analysed on regard to accident rate and accident fatalities. Three safety measures include level crossing accident, platform fatalities, and track trespass fatalities. About 90% of railway accident fatalities are caused by these three kind of accidents. Differential analysis shows about 4 to 6 years delay after railroad safety investment and safety improvement. This result can be utilized for the decision making on safety measures and safety target. Which required long term approach.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.6 s.249
• /
• pp.531-537
• /
• 2006

A lever type $NO_2$ micro gas sensor was fabricated by MEMS technology. In order to heat up the gas sensing material to a target temperature, a micro heater was built on the gas sensor. The sensing material laid on the heater and electrodes and did not contact with the silicon base to minimize the heat loss to the silicon base. The electric power to heat up the gas sensor to a target temperature was measured. The temperature distribution of micro gas sensor was analyzed by a CFD program. The predicted electric power of micro heater to heat up the sensing material to the target temperature showed a good agreement with the measured data. The design of micro gas sensor could be modified to show more uniform temperature distribution and to consume less electric power by optimizing the layout of micro heater and electrodes.

• Journal of Information Processing Systems
• /
• v.16 no.3
• /
• pp.639-647
• /
• 2020

In the vibration target localization algorithms based on time difference of arrival (TDOA), Fang algorithm is often used in practice because of its simple calculation. However, when the delay estimation error is large, the localization equation of Fang algorithm has no solution. In order to solve this problem, one dimensional search location algorithm based on TDOA is proposed in this paper. The concept of search is introduced in the algorithm. The distance d1 between any single sensor and the vibration target is considered as a search variable. The vibration target location is searched by changing the value of d1 in the two-dimensional plane. The experiment results show that the proposed algorithm is superior to traditional methods in localization accuracy.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.3
• /
• pp.15-23
• /
• 2019

This paper contains analyses and development processes of the requirements to detect the possible intermittent failure in an old avionics backplane. Interconnections for signal transmission between electronic components, such as Pin-to-PCB, FPCB-to-FPCB, pin-to-FPCB, and pint-to-wire, were selected as the main cause of intermittent failure by analyzing target equipment and documents. The possibility of detecting intermittent failures occurring in the target equipment is verified by physics-of-failure analyses. In order to verify the occurrence of intermittent failures and their detectability, latching continuity circuit testers were manufactured and accelerated life tests were performed by applying temperature and vibration cycle in consideration of flight conditions. Through the above process, the detection requirements for the major intermittent failure in the target avionics backplane was developed.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.1
• /
• pp.891-899
• /
• 2021

The United Nations' Millennium Development Goals (MDG) has become a goal to create a sustainable life. The MDGs' target was to be achieved in 2015, but it missed that date. The MDGs' target has turned into a Sustainable Development Goals (SDGs) to be achieved by 2030 The SDGs require financial support from companies. Funds are one of the resources to implement the SDGs. Government and private companies need to cooperate in achieving the SDGs target. The company has a responsibility to implement corporate social responsibility. The company's corporate social responsibility is part of the implementation of sustainable development in the SDGs. One of the essential industries that have responsibility for SDGs is the financial industry. This study aims to examine the determinant of corporate social responsibility funds in financial institutions in ASEAN countries. This study uses panel data to test the determinant variables on CSF provision. This study uses 45 sustainable development reports from 2015-2019. The total number of banks in the sample came from three countries, namely, Indonesia, Malaysia, and Thailand. This study concludes that firm size, profitability, efficiency, and the age of the CEO are variables that influence the size of corporate social responsibility funds.