• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.586-589
• /
• 2002

The Ultra Violet(UV) emission characteristics of Neon + Nitrogen gas-mixture discharge was investigated in AC plasma display panel. The firing voltage of Ne+$N_2$ gas-mixture discharge increased with increasing nitrogen concentration. The UV intensity emitted from the gas discharge also increased with increasing nitrogen concentration. The UV efficiency increase with increasing $N_2$ partial pressure at low $N_2$ concentration, and then UV efficiency is saturated at high $N_2$ concentration.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.71-74
• /
• 2000

In this study, the optimal condition of surface treatment for aluminum panel was determined by measuring the contact angle and T-peel strength. The contact angle was measured for various mixture ratios of acetylene gas and nitrogen gas. The mixture (acetylene gas to nitrogen gas) ratios used were 1:9, 3:7, 5:5, 7:3, and 9:1. The contact angle was also measured as a function of time of surface treatment. The results showed that the contact angle was a minimum for mixture ratio of 5:5. T-peel strength was a maximum for the treatment time of 30 second.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1688-1691
• /
• 2007

This paper shows that the boundary image sticking can be prohibited completely by using the vacuum sealing process, which means that the residual impurities such as nitrogen or oxygen can be a critical factor inducing the boundary image sticking. The production of boundary image sticking was checked in the test panel fabricated by the $N_2$ or $O_2$ flow during the vacuum sealing process. As a result, the boundary image sticking did not appear in the case of $N_2flow$, whereas the boundary image sticking was observed in the case of $O_2$ flow even though the test panel was fabricated by the vacuum sealing process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.401-404
• /
• 2003

This paper investigates the effect of plasma treatment of aluminum on the fracture toughness of aluminum/CFRP composites, The surface of the aluminum panel was treated by a DC plasma. The plasma treatment was carried out at volume ratio of acetylene gas to nitrogen gas of 5:5 and the treatment times used was 30 sec. The fracture toughness of plasma-treated aluminum/CFRP' composites was compared with that of untreated aluminum/CFRP composites and The fracture surface of aluminum/CFRP composites was compared with SEM. The results showed that fracture toughness of plasm-treated aluminum/CFRP composites was about 50% higher than that of untreated aluminum/CFRP composites.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.493-497
• /
• 2012

The rocket engine test facility(ReTF) was improved for hot firing tests of 7 ton-class liquid rocket engine combustion chamber, which will be used for the third stage of the Korea Space Launch Vehicle II(KSLV-II), considering convenience of operation and maintenance, flexibility and safety. In this paper, main modifications and functions of improved ReTF were described. 초 록

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.12
• /
• pp.1981-1987
• /
• 2001

This paper documents the effect of surface treatment of aluminum on the bonding strength of aluminum/CFRP composites. The surface of aluminum panel was treated by DC plasma. The optimal treatment condition of the aluminum was determined by measuring the contact angle and T-peel strength as functions of mixture ratio of acetylene gas to nitrogen gas. The mixture ratios used were 1:9, 3:7, 5:5, 7:3, and 9:1 Lap shear tests and T-peel tests were performed using surface-treated alumiunm/CFRP composites and regular alumiunm/CFRP composites. The results showed that the contact angle was minimized and the T-peel strength was maximized iota the mixture ratio of 5:5. The results also showed that the shear strength of surface-treated alumiunm/CFRP composites was 34% greater than that of regular alumiunm/CFRP composites. The T-peel strength of surface-treated alumiunm/CFRP composites was also 5 times greater than that of regular alumiunm/CFRP composites.

• Korean Journal of Materials Research
• /
• v.24 no.8
• /
• pp.429-433
• /
• 2014

As the fabrication technology used in FPDs(flat-panel displays) advances, the size of these panels is increasing and the pattern size is decreasing to the um range. Accordingly, a cleaning process during the FPD fabrication process is becoming more important to prevent yield reductions. The purpose of this study is to develop a FPD cleaning system and a cleaning process using a two-phase flow. The FPD cleaning system consists of two parts, one being a cleaning part which includes a two-phase flow nozzle, and the other being a drying part which includes an air-knife and a halogen lamp. To evaluate the particle removal efficiency by means of two-phase flow cleaning, silica particles $1.5{\mu}m$ in size were contaminated onto a six-inch silicon wafer and a four-inch glass wafer. We conducted cleaning processes under various conditions, i.e., DI water and nitrogen gas at different pressures, using a two-phase-flow nozzle with a gap distance between the nozzle and the substrate. The drying efficiency was also tested using the air-knife with a change in the gap distance between the air-knife and the substrate to remove the DI water which remained on the substrate after the two-phase-flow cleaning process. We obtained high efficiency in terms of particle removal as well as good drying efficiency through the optimized conditions of the two-phase-flow cleaning and air-knife processes.

• Korean Journal of Crystallography
• /
• v.13 no.2
• /
• pp.63-68
• /
• 2002

Zn/sub 2-x/Mn/sub x/SiO/sub 4/ phosphors for PDP were synthesized by solid state reaction method. The effects of firing temperature, ratio of hydrogen gas to nitrogen for heat treatment and concentration of activator and co-dopants on the luminous properties have been investigated. It was found that the phosphor fabricated at 1400℃ with x = 0.002 Mn concentration had a maximum brightness. Luminous properties of a phosphor were improved when Cr/sup 3＋/ was added as a co-dopant rather than other co-dopants.

• Journal of Climate Change Research
• /
• v.7 no.4
• /
• pp.443-450
• /
• 2016

The major greenhouse gases (GHGs) in agricultural sector are methane ($CH_4$), nitrous oxide ($N_2O$), carbon dioxide ($CO_2$). GHGs emissions are estimated by pertinent source category in a guideline book from Intergovernmental Panel on Climate Change (IPCC) such as methane from rice paddy, nitrous oxide from agricultural soil and crop residue burning. The methods for estimation GHGs emissions in agricultural sector are based on 1996 and 2006 IPCC guideline, 2000 and 2003 Good Practice Guidance. In general, GHG emissions were calculated by multiplying the activity data by emission factor. The total GHGs emission is $10,863Gg\;CO_2-eq$. from crop cultivation in agricultural sector in 2013. The emission is divided by the ratio of greenhouse gases that methane and nitrous oxide are 64% and 34%, respectively. Each gas emission according to the source categories is $7,000Gg\;CO_2-eq$. from rice paddy field, $3,897Gg\;CO_2-eq$. from agricultural soil, and $21Gg\;CO_2-eq$. from field burning, respectively. The GHGs emission in agricultural sector had been gradually decreased from 1990 to 2013 because of the reduction of cultivation. In order to compare with indirect emissions from agricultural soil, each emission was calculated using IPCC default factors (D) and country specific emission factors (CS). Nitrous oxide emission by CS applied in indirect emission, as nitrogen leaching and run off, was lower about 50% than that by D.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.4
• /
• pp.326-332
• /
• 2015

Greenhouse-gas emission factors are widely used to estimate emissions arising from a defined unit of a specific activity. Such estimates are used both for international reporting to the United Nations Framework Convention on Climate Change (UNFCCC) and for a myriad of national and subnational reporting purposes. The Intergovernmental Panel on Climate Change (IPCC) provides a methodology for national and sub-national estimation of known greenhouse gas emissions including $N_2O$ for each sector from which the emissions arise. The objective of this study was to develop an emission factor to estimate the direct $N_2O$ emission from an agricultural field cultivated with Chinese cabbage during spring season in 2010-2012. An estimated emission factor of $N_2O$ calculated over three years from field experiment accounting for cumulative $N_2O$ emission, nitrogen fertilization rate, and background $N_2O$ emission was $0.0056{\pm}0.00254$ (95% CI) Kg $N_2O-N/kg$ N. More extensive studies are needed to develop $N_2O$ emission factors for other upland crops in various regions of Korea because $N_2O$ emission is influenced by many factors including climate characteristics, soil properties agricultural practices and crop species.