• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.5
• /
• pp.625-632
• /
• 2004

Perfluorocompounds ($PFC_s$), such as tetrafluoromethane ($CF_4$) and hexafluoroethane ($C_2F_6$), have been widely used as plasma etching and chemical vapor deposition (CVD) gases for semiconductor manufacturing processes. Since these $PFC_s$ are known to cause a greenhouse effect intensively, there has been a growing interest in reducing $PFC_s$ emissions. Among various $CF_4$ decomposing techniques, a dielectric barrier discharge (DBD) is considered as one of a promising candidate because it has been successfully used for generating ozone ($O_3$) and decomposing nitrogen oxide (NO). Firstly, optimal concentration of oxygen for $CF_4$ decomposition was found to figure out how many primary and secondary reactions are associated with DBD process. Secondary, to find effective discharge method for $CF_4$ decomposition, a streamer and a glow mode in DBD are experimentally compared, which includes (i) coaxialcylinder DBD, (ii) DBD reactor packed with glass beads. and (iii) a glow mode operation with a helium gas. The test results showed that optimal concentration of oxygen was ranged 500 ppm~1% for treating 500 ppm of $CF_4$ and helium glow discharge was the most efficient one to decompose $CF_4$.

• Journal of the Korean Vacuum Society
• /
• v.16 no.2
• /
• pp.122-127
• /
• 2007

In this research, amophous carbon films (a-C, a-C:H, a-C:N) were synthesized by closed-field unbalanced magnetron (CFUBM) sputtering using graphite target. We also fabricated amorphous carbon films with applying negative DC bias voltage of 200 V in during the deposition in working pressure. Also, a-C:H and a-C:N films was synthesized by adding acethylene($C_{2}H_{2}$) and nitrogen(N) gases of 4 and 3 sccm into Ar pressure. The a-C:H film synthesized at -200 V exhibited the maxumum hardness of 26.3 GPa, the smooth surface of 0.1 nm and the good adhesion of 30.5 N. And a-C:N film synthesized at -200 V exhibited at -200 V exhibited the best adhesion of 32 N. This paper examined the effect of $C_{2}H_{2}$ gas, $N_{2}$ gas and negative DC bias voltage as the parameter for improving the physical properties and the relation between structral and physical properties of carbon films.

• Advances in nano research
• /
• v.5 no.3
• /
• pp.261-279
• /
• 2017

Spectroscopic investigation of Si quantum dots (Si-QDs) embedded in silicon nitride was performed over a broad stoichiometry range to optimize light emission. Plasma-enhanced chemical vapor deposition was used to grow the $SiN_x$ films on Si (001) substrates. The film composition was controlled via the flow ratio of silane ($SiH_4$) and ammonia ($NH_3$) in the range of R = 0.45-1.0 allowed to vary the Si excess in the range of 21-62 at.%. The films were submitted to annealing at $1100^{\circ}C$ for 30 min in nitrogen to form the Si-QDs. The properties of as-deposited and annealed films were investigated using spectroscopic ellipsometry, Fourier transform infrared spectroscopy, Raman scattering and photoluminescence (PL) methods. Si-QDs were detected in $SiN_x$ films demonstrating the increase of sizes with Si excess. The residual amorphous Si clusters were found to be present in the films grown with Si excess higher than 50 at.%. Multi-component PL spectra at 300 K in the range of 1.5-3.5 eV were detected and nonmonotonous varying total PL peak versus Si excess was revealed. To identify the different PL components, the temperature dependence of PL spectra was investigated in the range of 20-300 K. The analysis allowed concluding that the "blue-orange" emission is due to the radiative defects in a $SiN_x$ matrix, whereas the "red" and "infrared" PL bands are caused by the exciton recombination in crystalline Si-QDs and amorphous Si clusters. The nature of radiative and no radiative defects in $SiN_x$ films is discussed. The ways to control the dominant PL emission mechanisms are proposed.

• Journal of Nutrition and Health
• /
• v.44 no.2
• /
• pp.101-111
• /
• 2011

It is controversial whether low calcium intake, commonly associated with osteoporosis, results in calcium accumulation in soft tissues. This study was conducted to investigate the effects of low calcium (Ca) and oxalate (ox) intake on soft-tissue Ca deposits and bone metabolism in ovariectomized (ovx) rats. Eight week old female Sprague-Dawley rats were ovariectomized and divided into four groups. The rats were fed experimental diets containing low (0.1%, w/w) or normal (0.5%, w/w) Ca with or without sodium oxalate (1%, w/w); Sham/NCa, Ovx/NCa, Ovx/LCa, Ovx/NCa-ox, Ovx/LCa-ox for 6 weeks. All ovx rats showed a remarkable increase in body and tissue weight, glutamic oxaloacetic transaminase, glutamic pyruvic transaminase, blood urea nitrogen, alkaline phosphatase, and decreases in weight, ash, and Ca contents, as well as bone breaking force compared to those in sham rats. Serum Ca concentration was not significantly affected by dietary Ca levels or ox intake. Kidney Ca, ox acid content, and microscopic Ca deposition increased remarkably in the Ovx/LCa-ox group compared to those in the other groups. Ca content in the spleen and aorta also increased significantly, but the weight contents, Ca, bone breaking force, and Ca and oxalic acid in feces decreased significantly in the Ovx/LCa-ox group. Serum parathyroid hormone levels were not significantly different among the groups. These results indicate that low Ca intake decreased bone mineral content and increased Ca deposits in soft tissues, which was aggravated by ox intake in ovx rats. Thus, high ox intake may result in a kidney disorder in patients with osteoporosis who eat a low Ca diet.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.06a
• /
• pp.14-14
• /
• 2001

Nitride films such as TiN, CrN etc. deposited on glass by PVD processes have been developed for many industrial applications. These nitride films deposited on glass were widely used for not only decorative and optical coatings but also wear and corrosion resistance coatings employed as dies and molds made of glass for the example of lens forming molds. However, the major problem of nitride coatings on glass by PVD process is non-uniform film owing to pin-hole and micro crack. It is estimated that nonuniform coating is influenced by a different surface energy between metal nitrides and glass due to binding states. In this work, therefore, for the evaluation of nucleation and growth mechanism of nitride films on glass TiN and CrN film were synthesized on glass with various nitrogen partial pressure by unbalanced magnetron sputtering. Prior to deposition, for the examination of relationship between surface energy and film microstructure plasma pre-treatment process was carried out with various argon to hydrogen flow rate and substrate bias voltage, duty cycle and frequency by using pulsed DC power supply. Surface energy owing to the different plasma pre-treatment was calculated by the measurement of wetting angle and surface conditions of glass were investigated by X-ray Photoelectron Spectroscopy(XPS) and Atomic Force Microscope(AFM). The microstructure change of nitride films on glass with increase of film thickness were analyzed by X-Ray Diffraction(XRD) and Scanning Electron Microscopy(SEM).

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.6
• /
• pp.46-53
• /
• 1998

A new method to form the double structured active layers of a-Si/a-SiN$_{x}$ of polycrystalline thin film transistor is proposed and poly-Si TFTs employed double structure active film are fabricated. Nitrogen ions were added to bottom amorphous silicon active film(a-SiN$_{x}$ ) and pure a-Si film deposition on a-SiN$_{x}$ was followed. The XeCl excimer laser was irradiated to crystallize double structure active film. The grain growth of upper a-Si film was also promoted in the double structured active layers of a-Si/a-SiN$_{x}$ due to the mitigation of solidification process of lower a-SiN$_{x}$ layer. Our experimental results show that the ratio of NH$_3$/SiH$_4$ is required to maintain below 0.11 for the reduction of contact resistance of n$^{+}$ poly-SiN$_{x}$ layer.r.

• Journal of the Korean Ceramic Society
• /
• v.42 no.2 s.273
• /
• pp.94-98
• /
• 2005

$RuO_2$ is widely studied as a lower electrode material for high dielectric capacitors in DRAM (Dynamic Random Access Memories) and FRAM (Ferroelectric Random Access Memories). In this study, the effects of hydrogen, oxygen, and argon Electron Cyclotron Resonance (ECR) plasma pretreatments on deposited by Metal Organic Chemical Vapor Deposition (MOCVD) $RuO_2$ nucleation was investigated using X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Atomic Force Microscopy (AFM) analyses. Argon ECR plasma pretreatment was found to offer the highest $RuO_2$ nucleation density among these three pretreatments. The mechanism through which $RuO_2$ nucleation is enhanced by ECR plasma pretreatment may be that the argon or the hydrogen ECR plasma removes nitrogen and oxygen atoms at the TiN film surface so that the underlying TiN film surface is changed to Ti-rich TiN.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.83-87
• /
• 2002

Plasma enhanced chemical vapor deposited (PECVD) silicon nitride ($SiN_X$) is widely used as a gate dielectric material for the hydrogenated amorphous silicon(a-Si:H) thin film transistors (TFT's). We investigated $SiN_X$ films were deposited PECVD at low temperature ($300^{\circ}C$). The reaction gases were used pure nitrogen and a helium diluted of silane gas(20% $SiH_4$, 80% He). Experimental investigations were carried out with the variation of $N_2/SiH_4$ flow ratios from 3 to 50 and the rf power of 200 W. This article presents the $SiN_X$ gate dielectric studies in terms of deposition rate, hydrogen content, etch rate and C-V, leakage current density characteristics for the gate dielectric layer of thin film transistor applications. Electrical properties were analyzed through high frequency (1MHz) C-V and current-voltage (I-V) measurements. The thickness and the refractive index on the films were measured by ellipsometry and chemical bonds were determined by using an FT-IR equipment.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1536-1538
• /
• 2002

Effects at thermal treatment on the structural and electrical properties at DLC films have been studied. The DLC films were deposited by using a modified FCVA system as a function at negative substrate bias voltage, deposition time, and nitrogen flow rate. The thermal treatment on DLC films could be achieved by performing the RTA process at $600^{\circ}C$, 2min. Structural investigation on the thermal treatment effect was evaluated by inspecting the Raman spectroscopy, XPS, AFM, and internal compressive stress. In addition, the electrical properties of DLC films were evaluated by using the high current source and Lab-View data acquisition system. As the result at RTA treatment, $sp^3/sp^2$ ratio and internal compressive stress of the DLC films were decreased tram 5% to 22% and from 1GPa to 3GPa, and the $I_D/I_G$ intensity ratios was increased from 0.19 to 0.35. It was also found that the variation of internal stress of DLC films strongly agree with the variation of $sp^3/sp^2$ fraction and $I_D/I_G$ intensity ratio.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.E3
• /
• pp.137-148
• /
• 2003

In this study, we examined the influence of long-range transport of dust particles and air pollutants on the photochemistry of NO$_3$on Jeju Island, Korea (33.17 N, 126.10$^{\circ}$E) during the Asian Dust-Storm (ADS) period of April 2001. Three ADS events were observed during the periods of 10∼12, 13∼14, and 25∼26 April. Average concentration level of nighttime NO$_3$on Jeju Island during the ADS period was estimated to be about 2 x 10$^{8}$ molecules cm$^{-3}$ ( - 9 pptv). Decreases in NO$_3$levels during the ADS period was likely to be determined mainly by the enhancement of the $N_2$O$_{5}$ heterogeneous reaction on dust aerosol surfaces. The reaction of N20s on aerosol surfaces was a more important sink for nighttime N03 during the ADS due to the significant loading of dust particles. The reaction of $N_2$O$_{5}$ with NMHCs and the gas-phase reaction of N20s with water vapor were both significant loss mechanisms during the study period, especially during the NADS. However, dry deposition of these oxidized nitrogen species and a heterogeneous reaction of NO$_3$were of no importance. Short-term observations of $O_3$, NO$_2$, DMS, and SO$_2$in the MBL indicated that concentrations of most of these chemical species were different between the ADS and non - Asian - Dust-Storm (NADS) periods, implying that their levels were affected sensitively by the differences in air mass trajectories.